Usb Boot Post: 302340180

6 More Discussions You Might Find Interesting

1. Linux

How to boot Fedora 8 from USB

Hi, friends, can anyone suggest me how to boot fedora 8 from USB flash drive? thanks. :confused:

2. Linux

How to install linux in a system without cdrom, usb boot, floppy, other OS?

Hello to everyone, I am new to linux and I want to move to this system after bad experiences with windows. I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life. The cdrom is gone, the bios doesn't have usb boot support, there is no...

3. Ubuntu

[SOLVED] Dual boot Windows 7 and Ubuntu on USB

I am trying to dual boot on an external USB 500GB drive using my laptop.I have Windows 7 installed and booting on 1st partition 230GB now as active primary, 2nd partition is 100GB as primary, and 3rd partition is 135GB as primary. I was intending on installing Ubuntu onto the 2nd partition. I read...

4. Ubuntu

Clone one partition and boot from USB

I have small problem: my hard drive has 500GB storage and it is divided into partitions /dev/sda1 - 20 GB (boot) /dev/sda2 - rest I want to clone only one partition /dev/sda1 and write all data on my USB stick /dev/sdb What's more I want to make my USB bootable and I don't know at all how can...

5. Ubuntu

Copy existing Ubuntu to boot from USB

Hello all, I am looking for a way to copy the existing Ubuntu server 12.04 to a USB (with all the packages and such) and make it boot from the USB. I have seen other threads about copying the CD image to the USB, which is not exactly I am looking for. Before I start diving into anything I...

6. Solaris

T5220 not able to boot from USB

Hi, I want to install Solaris-11 on T5220. I created USB from sol-11_4-text-sparc.usb by usbcopy on another Solaris-11 servers, which looks like a good one. I tried did "reset-all" and still same issue. Can I get some help on this. {0} ok reset-all Sun Netra T5220, No Keyboard Copyright...

LEARN ABOUT DEBIAN

amttool

amttool(1)						      General Commands Manual							amttool(1)

NAME

       amttool - remotely control Intel AMT managed machines.

SYNOPSIS

       amttool host [ command ] [ arg(s) ]

DESCRIPTION

       amttool is a perl script which speaks SOAP to Intel AMT managed machines.  It can query informations about the machine in question and also
       send some commands for basic remote control.

       host is the hostname or IP address of the machine amttool should control.  command is an optional command.

       You must set fill AMT_PASSWORD environment variable with the AMT password.

       For more inforamtions on Intel AMT check amt-howto(7).

COMMANDS

       info   gather information (default).

       reset [ special ]
	      reset machine, with optional special command (see section below).

       powerup [ special ]
	      turn on machine.

       powerdown
	      turn off machine.

       powercycle [ special ]
	      powercycle machine.

       netinfo
	      print network configuration (requires AMT 2.5+).

       netconf if link [ ip mask gw [ dns1 [ dns2 ]]]
	      configure network interface (requires AMT 2.5+).	if is the interface handle, link the link policy.  If in doubt just feed  in  what
	      the  netinfo  command  prints.  ip is the IPv4 address, mask the netmask, gw the default gateway, dns1 and dns2 are the DNS Servers.
	      If no IP configuration is specified the tool tries to configure the machine in shared mac address mode with dhcp, otherwise in sepa-
	      rate mac address mode with static IP address.  Default for dns1 is the gateway address, for dns2 it is 0.0.0.0.

SPECIAL COMMANDS

       Special commands can optionally be specified for reset, powerup and powercycle.	They change the default boot behavior of the machine.

       bios   Asks for the BIOS boot messages being redirected to serial-over-lan.

       pxe    Network boot via PXE.

       hd     Boot from local disk.

       hdsafe Boot from local disk (safe mode).

       cd     Boot from CD/DVD.

       diag   Boot in diagnostics mode.

ENVIRONMENT

       AMT_PASSWORD
	      AMT password.

       AMT_DEBUG
	      Enable debug output.

SEE ALSO

       amtterm(1), gamt(1), amt-howto(7)

AUTHOR

       (c) 2007 Gerd Hoffmann <kraxel@redhat.com>

							     (c) 2007,08 Gerd Hoffmann							amttool(1)