I have a new server... We were doing some testing on it over the local ethernet. All was well in the night when we turned off the machine. In the morning we were unable to get the server online. Have changed cables, NICs, looked over network settings... all to no avail.
I am running Redhat... (4 Replies)
Hi all, i Followed these steps & still not able to get nfs service online ???:(
bash-3.2# svcs -a | grep nfs
disabled 17:48:02 svc:/network/nfs/cbd:default
disabled 17:48:02 svc:/network/nfs/client:default
disabled 20:56:06 svc:/network/nfs/status:default
offline ... (4 Replies)
Hi All,
How to keep the volumes offline after reboot also, i make it offline like below
# metaoffline d0 d20
after reboot its automatically getting online, however i have to keep it offline and as on required i have to make it online as per business.
Thanks in anticipation (9 Replies)
Hi,
I have a HBA that is currently offline for some unknown reason. The device shows up in the prtdiag -v stating it is okay. How can I bring this back online? It was working okay until recently. It is currently connected to the SAN. Details below.
# fcinfo hba-port
HBA Port WWN:... (7 Replies)
Hi,
Is there any command for showing offline users?
The only way I can think of doing it (as i cant find a command) is getting a list of all the online users, and comparing it to /etc/passwd, anything that is in /etc/passwd and not in the users file will be offline users. But I have no... (4 Replies)
Hello,
I currently use Solaris, and typically I use the
svcs -a | grep PROCESS
to see if it's online or Offline.
My questions is SVCS is in solaris but if I want to find out if a daemon or process is offline what other methods can I use?
ps -ef | grep PROCESS "what do I look for"
or... (1 Reply)
Dear all,
How to recover the Dns service from offline to online?
I used the command " svcadm enable dns/client"
the command is executing but again its showing service is offline.
pls clarify and give me suggesstion...
Thanks in advance (1 Reply)
Hello all,
I have a USB drive mounted on a linux RHEL 4 server which goes offline every now n then.
Here are some logs :
---------------------------------------------
# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002... (1 Reply)
Hi,
I need to offline one of the CPUs in my M4000. I'm going to use the psradm command to offline the CPU. Do I need to do anything before offlining the CPU like unbinding processes etc? The servers are running oracle databases which I will shutdown beforehand.:confused:
Thanks,... (0 Replies)
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
LEARN ABOUT DEBIAN
ql-dynamic-tgt-lun-disc
ql-dynamic-tgt-disc(8) System Administration ql-dynamic-tgt-disc(8)NAME
ql-dynamic-tgt-lun-disc - Scans for newly added LUNs.
SYNOPSIS
ql-dynamic-tgt-lun-disc [OPTIONS]
DESCRIPTION
Dynamic TGT-LUN Discovery Utility
This utility scans for newly added LUNs. After adding new LUNs, you do not need to unload, then load the QLogic FC driver or reboot the
system
To begin scanning the LUNs issue following command:
# /usr/sbin/ql-dynamic-tgt-lun-disc
-al, --allow-lip
LIP is not issued by default, even if it is required for scanning new LUNs Setting this option, allows the utility to issue LIP.
-cl, --current-luns
Displays LUNS currently present
-e, --extended-scan
Use this option as "-e | --extended-scan". to rescan LUNs. This will identify any change in attributes of existing LUNs. This option
can be used in combination of scan/refresh or max luns
-h, --help, ?
Prints this help message
-i, --interactive
Use this option to use the menu driven program
-is, --iscsi
Use this option to operate on ISCSI HBAs, this option can be used in combination of any other supported option.
-m, --max-lun
To set the maximum LUNs to be scanned
-p, --proc
Use PROC file system for LUN scanning
-r, --refresh
To refresh, that is remove LUNs that are lost use the options "-r|--refresh". This will remove the LUNs which no more exist.
-s, --scan [ -r|--refresh ]
The QLogic LUN scan utility re-scans all the devices connected to the QLogic HBA
SEE ALSO ql-lun-state-online(8), ql-hba-snapshot(8), ql-set-cmd-timeout(8)Matthias Schmitz <matthias@sigxcpu.org> July 2009 ql-dynamic-tgt-disc(8)