BSDCPIO(1)						    BSD General Commands Manual 						BSDCPIO(1)

NAME

     cpio -- copy files to and from archives

SYNOPSIS

     cpio {-i} [options] [pattern ...] [< archive]
     cpio {-o} [options] < name-list [> archive]
     cpio {-p} [options] dest-dir < name-list

DESCRIPTION

     cpio copies files between archives and directories.  This implementation can extract from tar, pax, cpio, zip, jar, ar, and ISO 9660 cdrom
     images and can create tar, pax, cpio, ar, and shar archives.

     The first option to cpio is a mode indicator from the following list:
     -i      Input.  Read an archive from standard input (unless overriden) and extract the contents to disk or (if the -t option is specified)
	     list the contents to standard output.  If one or more file patterns are specified, only files matching one of the patterns will be
	     extracted.
     -o      Output.  Read a list of filenames from standard input and produce a new archive on standard output (unless overriden) containing the
	     specified items.
     -p      Pass-through.  Read a list of filenames from standard input and copy the files to the specified directory.

OPTIONS

     Unless specifically stated otherwise, options are applicable in all operating modes.

     -0      Read filenames separated by NUL characters instead of newlines.  This is necessary if any of the filenames being read might contain
	     newlines.

     -A      (o mode only) Append to the specified archive.  (Not yet implemented.)

     -a      (o and p modes) Reset access times on files after they are read.

     -B      (o mode only) Block output to records of 5120 bytes.

     -C size
	     (o mode only) Block output to records of size bytes.

     -c      (o mode only) Use the old POSIX portable character format.  Equivalent to --format odc.

     -d      (i and p modes) Create directories as necessary.

     -E file
	     (i mode only) Read list of file name patterns from file to list and extract.

     -F file
	     Read archive from or write archive to file.

     -f pattern
	     (i mode only) Ignore files that match pattern.

     --format format
	     (o mode only) Produce the output archive in the specified format.	Supported formats include:

	     cpio     Synonym for odc.
	     newc     The SVR4 portable cpio format.
	     odc      The old POSIX.1 portable octet-oriented cpio format.
	     pax      The POSIX.1 pax format, an extension of the ustar format.
	     ustar    The POSIX.1 tar format.

	     The default format is odc.  See libarchive_formats(5) for more complete information about the formats currently supported by the
	     underlying libarchive(3) library.

     -H format
	     Synonym for --format.

     -h, --help
	     Print usage information.

     -I file
	     Read archive from file.

     -i      Input mode.  See above for description.

     --insecure
	     (i and p mode only) Disable security checks during extraction or copying.	This allows extraction via symbolic links and path names
	     containing '..' in the name.

     -J      (o mode only) Compress the file with xz-compatible compression before writing it.	In input mode, this option is ignored; xz compres-
	     sion is recognized automatically on input.

     -j      Synonym for -y.

     -L      (o and p modes) All symbolic links will be followed.  Normally, symbolic links are archived and copied as symbolic links.	With this
	     option, the target of the link will be archived or copied instead.

     -l      (p mode only) Create links from the target directory to the original files, instead of copying.

     -lzma   (o mode only) Compress the file with lzma-compatible compression before writing it.  In input mode, this option is ignored; lzma com-
	     pression is recognized automatically on input.

     -m      (i and p modes) Set file modification time on created files to match those in the source.

     -n      (i mode, only with -t) Display numeric uid and gid.  By default, cpio displays the user and group names when they are provided in the
	     archive, or looks up the user and group names in the system password database.

     -no-preserve-owner
	     (i mode only) Do not attempt to restore file ownership.  This is the default when run by non-root users.

     -O file
	     Write archive to file.

     -o      Output mode.  See above for description.

     -p      Pass-through mode.  See above for description.

     -preserve-owner
	     (i mode only) Restore file ownership.  This is the default when run by the root user.

     --quiet
	     Suppress unnecessary messages.

     -R [user][:][group]
	     Set the owner and/or group on files in the output.  If group is specified with no user (for example, -R :wheel) then the group will
	     be set but not the user.  If the user is specified with a trailing colon and no group (for example, -R root:) then the group will be
	     set to the user's default group.  If the user is specified with no trailing colon, then the user will be set but not the group.  In
	     -i and -p modes, this option can only be used by the super-user.  (For compatibility, a period can be used in place of the colon.)

     -r      (All modes.)  Rename files interactively.	For each file, a prompt is written to /dev/tty containing the name of the file and a line
	     is read from /dev/tty.  If the line read is blank, the file is skipped.  If the line contains a single period, the file is processed
	     normally.	Otherwise, the line is taken to be the new name of the file.

     -t      (i mode only) List the contents of the archive to stdout; do not restore the contents to disk.

     -u      (i and p modes) Unconditionally overwrite existing files.	Ordinarily, an older file will not overwrite a newer file on disk.

     -v      Print the name of each file to stderr as it is processed.	With -t, provide a detailed listing of each file.

     --version
	     Print the program version information and exit.

     -y      (o mode only) Compress the archive with bzip2-compatible compression before writing it.  In input mode, this option is ignored; bzip2
	     compression is recognized automatically on input.

     -Z      (o mode only) Compress the archive with compress-compatible compression before writing it.  In input mode, this option is ignored;
	     compression is recognized automatically on input.

     -z      (o mode only) Compress the archive with gzip-compatible compression before writing it.  In input mode, this option is ignored; gzip
	     compression is recognized automatically on input.

ENVIRONMENT

     The following environment variables affect the execution of cpio:

     LANG	The locale to use.  See environ(7) for more information.

     TZ 	The timezone to use when displaying dates.  See environ(7) for more information.

EXIT STATUS

     The cpio utility exits 0 on success, and >0 if an error occurs.

EXAMPLES

     The cpio command is traditionally used to copy file heirarchies in conjunction with the find(1) command.  The first example here simply
     copies all files from src to dest:
	   find src | cpio -pmud dest

     By carefully selecting options to the find(1) command and combining it with other standard utilities, it is possible to exercise very fine
     control over which files are copied.  This next example copies files from src to dest that are more than 2 days old and whose names match a
     particular pattern:
	   find src -mtime +2 | grep foo[bar] | cpio -pdmu dest

     This example copies files from src to dest that are more than 2 days old and which contain the word ``foobar'':
	   find src -mtime +2 | xargs grep -l foobar | cpio -pdmu dest

COMPATIBILITY

     The mode options i, o, and p and the options a, B, c, d, f, l, m, r, t, u, and v comply with SUSv2.

     The old POSIX.1 standard specified that only -i, -o, and -p were interpreted as command-line options.  Each took a single argument of a list
     of modifier characters.  For example, the standard syntax allows -imu but does not support -miu or -i -m -u, since m and u are only modifiers
     to -i, they are not command-line options in their own right.  The syntax supported by this implementation is backwards-compatible with the
     standard.	For best compatibility, scripts should limit themselves to the standard syntax.

SEE ALSO

     bzip2(1), tar(1), gzip(1), mt(1), pax(1), libarchive(3), cpio(5), libarchive-formats(5), tar(5)

STANDARDS

     There is no current POSIX standard for the cpio command; it appeared in ISO/IEC 9945-1:1996 (``POSIX.1'') but was dropped from IEEE Std
     1003.1-2001 (``POSIX.1'').

     The cpio, ustar, and pax interchange file formats are defined by IEEE Std 1003.1-2001 (``POSIX.1'') for the pax command.

HISTORY

     The original cpio and find utilities were written by Dick Haight while working in AT&T's Unix Support Group.  They first appeared in 1977 in
     PWB/UNIX 1.0, the ``Programmer's Work Bench'' system developed for use within AT&T.  They were first released outside of AT&T as part of Sys-
     tem III Unix in 1981.  As a result, cpio actually predates tar, even though it was not well-known outside of AT&T until some time later.

     This is a complete re-implementation based on the libarchive(3) library.

BUGS

     The cpio archive format has several basic limitations: It does not store user and group names, only numbers.  As a result, it cannot be reli-
     ably used to transfer files between systems with dissimilar user and group numbering.  Older cpio formats limit the user and group numbers to
     16 or 18 bits, which is insufficient for modern systems.  The cpio archive formats cannot support files over 4 gigabytes, except for the
     ``odc'' variant, which can support files up to 8 gigabytes.

BSD
								 December 21, 2007							       BSD