RACOON(8)						    BSD System Manager's Manual 						 RACOON(8)

NAME

     racoon -- IKE (ISAKMP/Oakley) key management daemon

SYNOPSIS

     racoon [-46BdFLv] [-f configfile] [-l logfile] [-P isakmp-natt-port] [-p isakmp-port]

DESCRIPTION

     racoon speaks the IKE (ISAKMP/Oakley) key management protocol, to establish security associations with other hosts.  The SPD (Security Policy
     Database) in the kernel usually triggers racoon.  racoon usually sends all informational messages, warnings and error messages to syslogd(8)
     with the facility LOG_DAEMON and the priority LOG_INFO.  Debugging messages are sent with the priority LOG_DEBUG.	You should configure
     syslog.conf(5) appropriately to see these messages.

     -4

     -6      Specify the default address family for the sockets.

     -B      Install SA(s) from the file which is specified in racoon.conf(5).

     -d      Increase the debug level.	Multiple -d arguments will increase the debug level even more.

     -F      Run racoon in the foreground.

     -f configfile
	     Use configfile as the configuration file instead of the default.

     -L      Include file_name:line_number:function_name in all messages.

     -l logfile
	     Use logfile as the logging file instead of syslogd(8).

     -P isakmp-natt-port
	     Use isakmp-natt-port for NAT-Traversal port-floating.  The default is 4500.

     -p isakmp-port
	     Listen to the ISAKMP key exchange on port isakmp-port instead of the default port number, 500.

     -v      This flag causes the packet dump be more verbose, with higher debugging level.

     racoon assumes the presence of the kernel random number device rnd(4) at /dev/urandom.

RETURN VALUES

     The command exits with 0 on success, and non-zero on errors.

FILES

     /etc/racoon.conf  default configuration file.

SEE ALSO

     ipsec(4), racoon.conf(5), syslog.conf(5), setkey(8), syslogd(8)

HISTORY

     The racoon command first appeared in the ``YIPS'' Yokogawa IPsec implementation.

SECURITY CONSIDERATIONS

     The use of IKE phase 1 aggressive mode is not recommended, as described in http://www.kb.cert.org/vuls/id/886601.

BSD
								 November 20, 2000							       BSD