ldm list-bindings ldom1
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldom1 active -n---- 5000 16 8G 0.0% 21m
MAC
00:14:4f:fb:45:e5
HOSTID
0x84fb45e5
VCPU
VID PID UTIL STRAND
0 32 0.3% 100%
1 33 0.0% 100%
2 34 0.0% 100%
3 35 0.0% 100%
4 36 0.0% 100%
5 37 0.0% 100%
6 38 0.0% 100%
7 39 0.0% 100%
8 40 1.4% 100%
9 41 0.0% 100%
10 42 0.0% 100%
11 43 0.0% 100%
12 44 0.0% 100%
13 45 0.0% 100%
14 46 0.0% 100%
15 47 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x408000000 8G
VARIABLES
autoboot?=false
boot-device=/virtual-devices@100/channel-devices@200/disk@0
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID
vnet0 primary-vsw0@primary network@0 00:14:4f:fb:2e:78 1
PEER MAC MODE PVID VID
primary-vsw0@primary 00:14:4f:fb:da:f8 1
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
iso iso@primary-vds0 disk@1 primary
cdrom cdrom@primary-vds0 disk@2 primary
vdisk0 vol0@primary-vds0 disk@0 primary
VCONS
NAME SERVICE PORT
ldom1 primary-vcc0@primary 5000
root@essapl020-u006 #
Code:
# ldm list-services primary
VCC
NAME LDOM PORT-RANGE
primary-vcc0 primary 5000-5100
VSW
NAME LDOM MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MODE
primary-vsw0 primary 00:14:4f:fb:da:f8 e1000g1 switch@0 1 1
VDS
NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 primary iso sol-10-u6-ga1-sparc-dvd.iso
cdrom /data03/sol-10-u6-ga1-sparc-dvd.iso
vol0 /dev/dsk/c1t1d0s0
If you need more details let me know .. i already tried changing zfs vol to a internal disk slice but still i 'm getting
NOTICE: [0] disk access failed.
Hi fugitive,
I see it seems ok with your own domain , but not with your control domain.
in LDoms control domain can use the same operating system, i mean your global OS, but not guest domains. thats why you must assign free disk, that is available for new installation of OS for guest domains in future. in your situation you have assigned /dev/dsk/c1t1d0s0 ..
with assigning disk to primary (control) domain your going to give disk service to your logical domains in future. hence they need free available disks for new installation of OS.
is that disk free and not active.??? I suspect that is your system disk )
let me see your format command result as well as df -h.
Dear Srs,
I have a Linux server (linux01) booting from SAN with a volume in a Nexsan SATAbeast storage array (san01). The disk/volume has four ext3 partitions, total size is near to 400GB, but only 20-30GB are in use.
I need to move this disk/volume to another Nexsan SATAbeast storage array... (0 Replies)
Hi,
We have 200GB SAN volume mounted on Redhat EL 5. which is working fine. As my SAN supports dynamic resizing of volumes, i unmounted the volume and resized the SAN Volume to 300 GB successfully. Then i mounted again but it shows 200GB only but data is intact.
Now, my requirement is to let... (3 Replies)
Hello all. I have a perplexing problem
I have an AIX 5.1 system on an EMC SAN.
This system had been on a CX400 SAN for several years. The system was migrated to a CX700 just over a week ago. The migration consisted of utilizing on of the HBAs in the system and connecting to both SANs
... (9 Replies)
Hi, I need to expand a ZFS volume from 500GB to 800GB. I'd like to ask your help to confirm the following procedure:
Can I do it on the fly without bothering the users working on this volume?
Thank you in advance! (6 Replies)
I have viewed a few previous posts regarding this, but none of them quite described or worked with my issue.
I am out of local disk space on my LDOM Manager but still have plenty of SAN vCPU and Memory available so I am trying to install a new LDOM OS on SAN.
I have exposed the SAN to the... (0 Replies)
Apologies if this is the wrong forum..
I have some LDOMs running on a Sparc server. I copied the disk0 file from one chassis over to another, stopped the ldom on the source system and started it on the 2nd one. All fine. Shut it down and flipped back. We then did a fair bit of work on the... (4 Replies)
I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
Hi all,
I'm using Solaris 11.3.
HBA port connected to SAN disk 3T.
AVAILABLE DISK SELECTIONS:
0. c0t600A0B800033696A0000214B571938F1d0 <SUN-CSM200_R-0760 cyl 44556 alt 2 hd 255 sec 189>
/scsi_vhci/ssd@g600a0b800033696a0000214b571938f1
1. c2t3C58620E0C565100d0... (1 Reply)
Generally, this is what we do:-
On primary, export 2 LUNs (add-vdsdev).
On primary, assign these disks to the ldom in question (add-vdisk).
On ldom, created mirrored zpool from these two disks.
On one server (which is older) we have:-
On primary, create mirrored zpool from the two LUNs.... (4 Replies)