Dear Srs,
I have a Linux server (linux01) booting from SAN with a volume in a Nexsan SATAbeast storage array (san01). The disk/volume has four ext3 partitions, total size is near to 400GB, but only 20-30GB are in use.
I need to move this disk/volume to another Nexsan SATAbeast storage array... (0 Replies)
Hi,
We have 200GB SAN volume mounted on Redhat EL 5. which is working fine. As my SAN supports dynamic resizing of volumes, i unmounted the volume and resized the SAN Volume to 300 GB successfully. Then i mounted again but it shows 200GB only but data is intact.
Now, my requirement is to let... (3 Replies)
Hello all. I have a perplexing problem
I have an AIX 5.1 system on an EMC SAN.
This system had been on a CX400 SAN for several years. The system was migrated to a CX700 just over a week ago. The migration consisted of utilizing on of the HBAs in the system and connecting to both SANs
... (9 Replies)
Hi, I need to expand a ZFS volume from 500GB to 800GB. I'd like to ask your help to confirm the following procedure:
Can I do it on the fly without bothering the users working on this volume?
Thank you in advance! (6 Replies)
I have viewed a few previous posts regarding this, but none of them quite described or worked with my issue.
I am out of local disk space on my LDOM Manager but still have plenty of SAN vCPU and Memory available so I am trying to install a new LDOM OS on SAN.
I have exposed the SAN to the... (0 Replies)
Apologies if this is the wrong forum..
I have some LDOMs running on a Sparc server. I copied the disk0 file from one chassis over to another, stopped the ldom on the source system and started it on the 2nd one. All fine. Shut it down and flipped back. We then did a fair bit of work on the... (4 Replies)
I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
Hi all,
I'm using Solaris 11.3.
HBA port connected to SAN disk 3T.
AVAILABLE DISK SELECTIONS:
0. c0t600A0B800033696A0000214B571938F1d0 <SUN-CSM200_R-0760 cyl 44556 alt 2 hd 255 sec 189>
/scsi_vhci/ssd@g600a0b800033696a0000214b571938f1
1. c2t3C58620E0C565100d0... (1 Reply)
Generally, this is what we do:-
On primary, export 2 LUNs (add-vdsdev).
On primary, assign these disks to the ldom in question (add-vdisk).
On ldom, created mirrored zpool from these two disks.
On one server (which is older) we have:-
On primary, create mirrored zpool from the two LUNs.... (4 Replies)
Discussion started by: psychocandy
4 Replies
LEARN ABOUT MOJAVE
mpscnnmultiplygradient
MPSCNNMultiplyGradient(3) MetalPerformanceShaders.framework MPSCNNMultiplyGradient(3)NAME
MPSCNNMultiplyGradient
SYNOPSIS
#import <MPSCNNMath.h>
Inherits MPSCNNArithmeticGradient.
Instance Methods
(nonnull instancetype) - initWithDevice:
Additional Inherited Members
Detailed Description
This depends on Metal.framework. Specifies the multiplication gradient operator. This arithmetic gradient filter requires the following
inputs: gradient image from the previous layer (going backwards) and either the primary or the secondary source image from the forward
pass. You will need a separate filter for the primary and secondary source images.
Without broadcasting, the arithmetic multiply gradient operation is an element-wise multiplication operation between the gradient image
from the previous layer (going backwards) and:
o The secondary source image from the forward pass for the primary source filter (for x * y, d/dx(x * y) = y).
o The primary source image from the forward pass for the secondary source filter (for x * y, d/dy(x * y) = x).
Setting the broadcasting parameters results in a reduction operation (sum) across all of the applicable broadcasting dimensions (rows,
columns, feature channels, or any combination thereof) to produce the destination image of the size that matches the primary/secondary
input images used in the forward pass.
Method Documentation
- (nonnull instancetype) initWithDevice: (nonnull id< MTLDevice >) device
Initialize the multiplication gradient operator.
Parameters:
device The device the filter will run on.
Returns:
A valid MPSCNNMultiplyGradient object or nil, if failure.
Reimplemented from MPSCNNArithmeticGradient.
Author
Generated automatically by Doxygen for MetalPerformanceShaders.framework from the source code.
Version MetalPerformanceShaders-100 Thu Feb 8 2018 MPSCNNMultiplyGradient(3)