Serial port in AIX Post: 302334268

10 More Discussions You Might Find Interesting

1. Linux

Urgent - serial port

Hi All, I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working. I am sure the hardware is fine. when I give command dmesg | grep tty I get, serial 8250:ttyS0 at...

2. Programming

Serial port programming

I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than...

3. OS X (Apple)

Serial port parameters

Hello, I am trying to use a rs232 device through a USB serial port on my MacBook pro laptop. I think the device needs the communication parameters to be 9600 n 8 1 my question is does anyone know what the default communication parameters are for mac os x 10.5.7 unix? And if the default...

4. Solaris

Serial port on the T5140

What is the serial port on the T5140 used for.

5. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck.

8. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

9. AIX

How to change from tty03 to tty00 serial port in AIX 5.x?

Hi, We use AIX 5.x, and we have an application that use the info from a server through a serial port tty00. Some days ago, we bought a new two port serial board, and the server assign this new ports as tty02 and tty03, and leaves tty00 and tty01 as unavailable. We cant modify the program and...

10. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!!

LEARN ABOUT DEBIAN

sredird

sredird(8)							      sredird								sredird(8)

NAME

       sredird - RFC 2217 serial port server

SYNOPSIS

       sredird [-i] log-level serial-device lock-file [poll-interval]

DESCRIPTION

       This manual page documents briefly the sredird, program.

       This  program  when  run  through inetd will use the RFC 2217 extensions to TELNET to implement serial commands over the TCP connection and
       interface to a specified serial port.

OPTIONS

       An optional first parameter is '-i' to enable compatability with Cisco IOS.

       The first mandatory parameter is the log level for use in syslog.  The next mandatory parameter is the device node for the  serial  device,
       it  must  be  a	fully  qualified  path.   The  final mandatory parameter is the file name for the lock file to be used to prevent multiple
       instances of sredird from talking to the serial port at the same time, or to allow sharing a port between modem and sredird.

EXAMPLE

       Here is a configuration line for running it from inetd: sredir	       stream  tcp     nowait  root    /usr/sbin/tcpd /usr/sbin/sredird  5
       /dev/modem /var/lock/LCK..modem

AUTHOR

       This  man page was written by Russell Coker <russell@coker.com.au>.  May be freely used and distributed without restriction under the terms
       of the GPL.

       The sredird program was written by Denis Sbragion <d.sbragion@infotecna.it> and Jeffrey Altman <jaltman@columbia.edu>.

Russell Coker <;russell@coker.com.au>				       2.2.0								sredird(8)