Serial port in AIX Post: 302334268

10 More Discussions You Might Find Interesting

1. Linux

Urgent - serial port

Hi All, I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working. I am sure the hardware is fine. when I give command dmesg | grep tty I get, serial 8250:ttyS0 at...

2. Programming

Serial port programming

I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than...

3. OS X (Apple)

Serial port parameters

Hello, I am trying to use a rs232 device through a USB serial port on my MacBook pro laptop. I think the device needs the communication parameters to be 9600 n 8 1 my question is does anyone know what the default communication parameters are for mac os x 10.5.7 unix? And if the default...

4. Solaris

Serial port on the T5140

What is the serial port on the T5140 used for.

5. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck.

8. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

9. AIX

How to change from tty03 to tty00 serial port in AIX 5.x?

Hi, We use AIX 5.x, and we have an application that use the info from a server through a serial port tty00. Some days ago, we bought a new two port serial board, and the server assign this new ports as tty02 and tty03, and leaves tty00 and tty01 as unavailable. We cant modify the program and...

10. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!!

LEARN ABOUT OSF1

dc

dc(7)							 Miscellaneous Information Manual						     dc(7)

NAME

       dc - serial line/mouse/keyboard

SYNOPSIS

       controller   dc0   at ibus0   slot 0   vector dcintr

DESCRIPTION

       The  dc	serial	line controller provides DECstation 2100, DECstation 3100, DECstation 5000, and DECstation 5100 computer systems with key-
       board, mouse, and serial communications interfaces. The serial communications interfaces on the DECstation 2100 and DECstation 3100 provide
       partial	modem  control.  The  serial communications interfaces on the DECstation 5000 provide full modem control.  The device special file
       /dev/tty01 on a DECstation 5100 provides full modem control, while the remaining ports provide no modem control at all.	All serial  commu-
       nications interfaces operate at baud rates from B50 to B9600, excluding B200.

       The  dc	ports  are  used as follows: Usage Graphics device keyboard at 4800 BPS Mouse or tablet at 4800 BPS Communications port 1 (w/modem
       control)/local terminal Communications port 2 (w/modem control)/local terminal

       On all systems except the DECstation 5100, serial port 2 is used for the system console port in server (that is,  non-graphics)	configura-
       tions.  On DECstation 5100s, the serial port labeled 3 on the back of the system is always the system console port.  The serial system con-
       sole port always operates at 9600 BPS, 8-bits, no parity; modem control is not supported.

RESTRICTIONS

       Data communications equipment attached to the console serial port in server configurations must be set to 9600 BPS, 8-bits, no parity.  The
       scc driver enforces this restriction.

FILES

       console terminal local terminal local terminal local terminal (DECstation 5100 only)

RELATED INFORMATION

       console(7), devio(7), tty(7), MAKEDEV(8) delim off

																	     dc(7)