Sponsored Content
Full Discussion: Serial port in AIX
Operating Systems AIX Serial port in AIX Post 302333784 by pchangba on Tuesday 14th of July 2009 04:47:46 AM
Old 07-14-2009
Serial port in AIX

Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)

I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know??
 

10 More Discussions You Might Find Interesting

1. Linux

Urgent - serial port

Hi All, I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working. I am sure the hardware is fine. when I give command dmesg | grep tty I get, serial 8250:ttyS0 at... (0 Replies)
Discussion started by: vr_82
0 Replies

2. Programming

Serial port programming

I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Discussion started by: raj8109
2 Replies

3. OS X (Apple)

Serial port parameters

Hello, I am trying to use a rs232 device through a USB serial port on my MacBook pro laptop. I think the device needs the communication parameters to be 9600 n 8 1 my question is does anyone know what the default communication parameters are for mac os x 10.5.7 unix? And if the default... (0 Replies)
Discussion started by: jamesapp
0 Replies

4. Solaris

Serial port on the T5140

What is the serial port on the T5140 used for. (4 Replies)
Discussion started by: pgsanders
4 Replies

5. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

7. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck. (6 Replies)
Discussion started by: Meow613
6 Replies

8. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies

9. AIX

How to change from tty03 to tty00 serial port in AIX 5.x?

Hi, We use AIX 5.x, and we have an application that use the info from a server through a serial port tty00. Some days ago, we bought a new two port serial board, and the server assign this new ports as tty02 and tty03, and leaves tty00 and tty01 as unavailable. We cant modify the program and... (4 Replies)
Discussion started by: trevian3969
4 Replies

10. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!! (8 Replies)
Discussion started by: trevian3969
8 Replies
BAYCOM(9)						      Kernel Reference Guide							 BAYCOM(9)

NAME
baycom - amateur (AX.25) packet radio network driver for baycom modems SYNOPSIS
#include <linux/baycom.h> #include <linux/hdlcdrv.h> DESCRIPTION
The driver currently supports three different modems: ser12, par96 and par97. ser12 This is a very simple 1200 baud AFSK modem. The modem consists only of a modulator/demodulator chip, usually a TI TCM3105. The computer is responsible for regenerating the receiver bit clock. The modem connects to a serial port, hence the name. Since the serial port is not used as an async serial port, the kernel driver for serial ports cannot be used, and this driver only supports standard serial hardware (8250, 16450, 16550). par96 This is a modem for 9600 baud FSK compatible to the G3RUH standard. The modem does all the filtering and regenerates the receiver clock. Data is transferred from and to the PC via a shift register. The shift register is filled with 16 bits and an interrupt is signalled. The PC then empties the shift register in a burst. This modem connects to the parallel port, hence the name. par97 This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem is protocol compatible to par96, but uses only three low power ICs and can therefore be fed from the parallel port and does not require an additional power supply. IOCTL CALLS
The ioctl calls follow the implementation in the hdlcdrv. BAYCOMCTL_GETMODEMTYPE returns the modem type (i.e. ser12 or par96) and the options in effect (currently only the source of the DCD signal) BAYCOMCTL_SETMODEMTYPE sets the modem type and the options. Only superuser can do this. BAYCOMCTL_GETDEBUG return some debugging values. Not always available. SEE ALSO
baycom (9), soundmodem (9), linux/drivers/net/hdlcdrv.c, AUTHOR
baycom was written by Thomas Sailer, HB9JNX/AE4WA, (t.sailer@alumni.ethz.ch). Linux 2.1.x 2 October 1996 BAYCOM(9)
All times are GMT -4. The time now is 11:01 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy