07-14-2009
Serial port in AIX
Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)
I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know??
10 More Discussions You Might Find Interesting
1. Linux
Hi All,
I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working.
I am sure the hardware is fine.
when I give command
dmesg | grep tty
I get,
serial 8250:ttyS0 at... (0 Replies)
Discussion started by: vr_82
0 Replies
2. Programming
I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Discussion started by: raj8109
2 Replies
3. OS X (Apple)
Hello,
I am trying to use a rs232 device through a USB serial port on my MacBook pro laptop. I think the device needs the communication parameters to be
9600 n 8 1
my question is does anyone know what the default communication parameters are for mac os x 10.5.7 unix? And if the default... (0 Replies)
Discussion started by: jamesapp
0 Replies
4. Solaris
What is the serial port on the T5140 used for. (4 Replies)
Discussion started by: pgsanders
4 Replies
5. Shell Programming and Scripting
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies
6. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
7. Web Development
I need to set a serial port to 9600 7E1. How do I accomplish this?
I've tried every combination, with no luck. (6 Replies)
Discussion started by: Meow613
6 Replies
8. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
9. AIX
Hi,
We use AIX 5.x, and we have an application that use the info from a server through a serial port tty00.
Some days ago, we bought a new two port serial board, and the server assign this new ports as tty02 and tty03, and leaves tty00 and tty01 as unavailable.
We cant modify the program and... (4 Replies)
Discussion started by: trevian3969
4 Replies
10. AIX
HI,
Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X
I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server.
Thanks in advance !!! (8 Replies)
Discussion started by: trevian3969
8 Replies
LEARN ABOUT REDHAT
serial_cs
SERIAL_CS(4) Kernel Interfaces Manual SERIAL_CS(4)
NAME
serial_cs - PCMCIA serial port driver
SYNOPSIS
insmod serial_cs.o [pc_debug=n] [irq_list=i,j,...] [do_sound=n]
DESCRIPTION
Serial_cs is the Card Services driver for all PCMCIA serial devices, including modem cards. When serial_cs is bound to a serial or modem
card, it will generally attempt to allocate the first unused serial device for use by the card. The device chosen will be recorded in the
kernel log file, and will also be reported to cardmgr(8). The major and minor numbers and device name reported by serial_cs will match the
corresponding "dialout" device (/dev/cua#). The new device can be accessed using this device file or the corresponding /dev/ttyS# device.
The default serial card setup script will link the dialout device to /dev/modem.
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
do_sound=n
A flag specifying if speaker output should be enabled. The default is 1 (true). Set to 0 to disable speaker output.
AUTHOR
David Hinds - dahinds@users.sourceforge.net
SEE ALSO
cardmgr(8), pcmcia(5).
pcmcia-cs 2000/06/12 21:24:48 SERIAL_CS(4)