Sponsored Content
Operating Systems Solaris Connect an External SCSI Hard Drive to Ultra 80 Post 302333370 by ajnabi on Sunday 12th of July 2009 10:56:22 PM
Old 07-12-2009
Here is the outputs of the commands:
1 ) cfgadm -avl c1
Output is :
************************
AP_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
c1 connected unconfigured unknown
Dec 31 1969 scsi-bus n /devices/pci@1f,4000/scsi@3,1:scsi
*************************************************

2) prtdiag -v
prtdiag: not found

************************************
3) prtconf | grep -v not

System Configuration: Sun Microsystems sun4u
Memory size: 1024 Megabytes
System Peripherals (Software Nodes):

SUNW, Ultra-80
options, instance #0
pci, instance#0
ebus, instance #0
power, instance #0
se, instance #0
su, instance #0
su, instance #1
ecpp, instance#0
SUNW,CS4231, instance #0
network, instance #0
scsi, instance #0
sd, instance #0
sd, instance #6
scsi, instance #1
TSI, gfxp, instance #0
TSI, gfxp, instance #1
pci, instance #1
pci, instance #1
ethernet, instance #2
ethernet, instance #3
pseudo, instance #0
********************************************************
4) ls -l /dev/dsk/c1t1d0

/dev/dsk/c1t1d0: No such file or directory

******************************************

Quote:
Originally Posted by Sapfeer
Please provide output from the following commands:
Code:
cfgadm -avl c1
prtdiag -v
prtconf | grep -v not
ls -l /dev/dsk/c1t1d0

 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

hard drive in Sun Ultra 10

What are the options on upgrading disk space in an Ultra 10 workstation? Sun states they are EIDE drives, are they standard or Sun specific? Thanks (1 Reply)
Discussion started by: 98_1LE
1 Replies

2. Solaris

mounting an external scsi tape drive

hi- I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming... (9 Replies)
Discussion started by: ECBROWN
9 Replies

3. UNIX for Dummies Questions & Answers

Connecting an external SCSI drive to a unix computer

I am interested in booting up my unix computer by connecting an external SCSI drive( intergraph) to it. The unix box is also an intergraph computer. Whenever I boot it, it gives me an error that says Drive not ready, Insert Boot Diskette in A. What am I doing wrong? Any input would be... (3 Replies)
Discussion started by: teruotor
3 Replies

4. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies

5. Solaris

Problem with SCSI DAT drive on Ultra 10

I will be honest I am quite new to UNIX and Solaris so this may be a simple thing. I have just purchased a Sun (rebranded HP obviously) DAT DDS3 SCSI tape drive for my Sun Ultra 10 running Solaris 10. I have previously fitted a SCSI card to the box which has configured ok and can be seen from... (1 Reply)
Discussion started by: mattw
1 Replies

6. UNIX for Dummies Questions & Answers

External SCSI hard drive

Someone gave me a small external SCSI hard drive for my SunOS 5.8 test system. How do I make Unix see the hard drive? (2 Replies)
Discussion started by: FredSmith
2 Replies

7. Solaris

Sun Ultra 2 Hard Drive Replacement

Hi all...I have an old Sun Ultra 2 running SunOS 5.7 (I know old). These machines have 2 hard drives and one of my drives fried. I bought some replacement drives and wanted to a simple "dd" command from my one good drive to copy all to the new replacement drive. The new drives however give me a... (11 Replies)
Discussion started by: psantinello
11 Replies

8. SCO

Moving hard drive and SCSI adapter to another computer

OK group, it's been 12 years since I worked with SCO. I need some direction here: SCO Openserver 5.07 I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
Discussion started by: jscholz
1 Replies

9. Solaris

How to make an exact image copy of a SCSI hard drive in Solaris 8 OS?

To Solaris 8 Experts, Please let me know what's the best method / procedure as well as the Solaris 8 commands for accomplishing the following tasks on a production Sun Enterprise 250 Server running Sun Solaris 8 Operating System: 1. Make an exact image/copy of the SCSI Hard Drive in the... (3 Replies)
Discussion started by: ssabet
3 Replies

10. UNIX for Advanced & Expert Users

External hard drive

I have connected an external hard drive. I can't find it. Both ls /media, fdisk -l and ls /dev show nothing. TIA (3 Replies)
Discussion started by: Meow613
3 Replies
BT(4)							   BSD Kernel Interfaces Manual 						     BT(4)

NAME
bt -- Buslogic/Mylex MultiMaster SCSI host adapter driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device isa device scbus device bt In /boot/device.hints: hint.bt.0.at="isa" hint.bt.0.port="0x330" DESCRIPTION
This driver provides access to the SCSI bus connected to a Buslogic/Mylex MultiMaster or compatible controller: MultiMaster "W" Series Host Adapters: Adapter Bus Commands Description BT-948 PCI 192 Ultra SCSI-3 BT-958 PCI 192 Wide ULtra SCSI-3 BT-958D PCI 192 Wide Differential Ultra SCSI-3 MultiMaster "C" Series Host Adapters: Adapter Bus Commands Description BT-946C PCI 100 Fast SCSI-2 BT-956C PCI 100 Wide Fast SCSI-2 BT-956CD PCI 100 Wide Differential Fast SCSI-2 BT-445C VLB 100 Fast SCSI-2 BT-747C EISA 100 Fast SCSI-2 BT-757C EISA 100 Wide Fast SCSI-2 BT-757CD EISA 100 Wide Differential Fast SCSI-2 BT-545C ISA 50 Fast SCSI-2 BT-540CF ISA 50 Fast SCSI-2 MultiMaster "S" Series Host Adapters: Adapter Bus Commands Description BT-445S VLB 30 Fast SCSI-2 BT-747S EISA 30 Fast SCSI-2 BT-747D EISA 30 Differential Fast SCSI-2 BT-757S EISA 30 Wide Fast SCSI-2 BT-757D EISA 30 Wide Differential Fast SCSI-2 BT-545S ISA 30 Fast SCSI-2 BT-542D ISA 30 Differential Fast SCSI-2 BT-742A EISA 30 SCSI-2 (742A revision H) BT-542B ISA 30 SCSI-2 (542B revision H) MultiMaster "A" Series Host Adapters: Adapter Bus Commands Description BT-742A EISA 30 SCSI-2 (742A revisions A - G) BT-542B ISA 30 SCSI-2 (542B revisions A - G) Tagged queueing is supported on 'W' series adapters, 'C' series adapters with firmware of rev 4.42 and higher, and 'S' series adapters with firmware of rev 3.35 and higher. Boards with certain firmware revisions may lock up under heavy load to certain devices, especially if tagged queueing is used. Should you encounter a problem with your adapter, contact Mylex technical support and ensure you have the latest firmware for your controller. HARDWARE
The bt driver supports the following BusLogic MultiMaster ``W'', ``C'', ``S'', and ``A'' series and compatible SCSI host adapters: o BusLogic BT-445C o BusLogic BT-445S o BusLogic BT-540CF o BusLogic BT-542B o BusLogic BT-542B o BusLogic BT-542D o BusLogic BT-545C o BusLogic BT-545S o BusLogic/BusTek BT-640 o BusLogic BT-742A o BusLogic BT-742A o BusLogic BT-747C o BusLogic BT-747D o BusLogic BT-747S o BusLogic BT-757C o BusLogic BT-757CD o BusLogic BT-757D o BusLogic BT-757S o BusLogic BT-946C o BusLogic BT-948 o BusLogic BT-956C o BusLogic BT-956CD o BusLogic BT-958 o BusLogic BT-958D o Storage Dimensions SDC3211B / SDC3211F AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also supported by the bt driver. SEE ALSO
cd(4), da(4), sa(4), scsi(4) HISTORY
The bt driver first appeared in the 386BSD patch kit. AUTHORS
Julian Elischer wrote a driver for the Multimaster cards that appeared in the 386BSD patch kit. The driver was rewritten by Justin T. Gibbs to take advantage of new board features and work with the CAM SCSI framework in FreeBSD 3.0. Special thanks to Leonard N. Zubkoff for writing such a complete and well documented Mylex/BusLogic MultiMaster driver for Linux. Support in this driver for the wide range of MultiMaster controllers and firmware revisions, with their otherwise undocumented quirks, would not have been possible without his efforts. BSD
June 18, 2006 BSD
All times are GMT -4. The time now is 09:43 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy