Sponsored Content
Full Discussion: Need help with printf
Top Forums UNIX for Dummies Questions & Answers Need help with printf Post 302332911 by compan023 on Friday 10th of July 2009 10:31:54 AM
Old 07-10-2009
Need help with printf

Hi,
I have just completed my first script (Smilie) and now i just need to format it with printf.
This is what I have:
Code:
#!/bin/ksh
TOTB=0
TOTF=0
TOTI=0
HOST=`hostname`
echo " FSYSTEM    BLKS     FREE    INUSE     MOUNTEDON"
df -m | grep -v ":"|grep -v Free|grep -v "/proc"| while read FSYSTEM BLKS FREE U
SED IUSED PERIUSED MOUNTEDON
#set -x
do
(( INUSE = $BLKS - $FREE ))
(( TOTB = $INUSE + $TOTB ))
(( TOTF = $BLKS - $INUSE ))
(( TOTI = $TOTB  - $FREE ))
echo $FSYSTEM $BLKS $FREE $INUSE $MOUNTEDON
done
echo Total Blocks  Total Free  Total In Use 
echo  $TOTB  $TOTF  $TOTI

And this is what I would like the return to look like:
Code:
 FSYSTEM         BLKS       FREE         INUSE         MOUNTEDON
/dev/hd4      1024.00        966.60       58             /
/dev/hd2      3392.00        288.55       3104          /usr
/dev/hd9var  2048.00        1976.46     72             /var
/dev/hd3      2048.00        1834.09     214           /tmp
/dev/hd1      1536.00        698.94       838          /home
/dev/hd10opt 1024.00      556.55       468          /opt
/dev/fslv00    30720.00     13025.69    17695       /aix52_save_s
/dev/fslv01    1024.00       1023.52     1              /var/adm/perf
/dev/nmon_lv 1600.00 1   584.19       16             /nmondata

Total Blocks         Total Free              Total In Use
22466                 1584                      20882

could somebody please help me figure out where, and what exactly to put in for the printf command. I have read through the man page on printf and am still unclear about what to do.

Thanks
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

printf question

can you take input from another command and do printf? such as awk '{print $2,$1}' | sort -k1,1 -k2,2 | printf "%-10s,%15s" this does not work.. but there must be a way.. please help me.. thank you. (3 Replies)
Discussion started by: hankooknara
3 Replies

2. Programming

printf

What is the output of the following program considering an x86 based parameter passing sequence where stack grows towards lower memory addresses and that arguments are evaluated from right to left: int i=10; int f1() { static int i = 15; printf("f1:%d ", i); return i--; } main() {... (2 Replies)
Discussion started by: arunviswanath
2 Replies

3. Shell Programming and Scripting

printf

How to print output in following format? A..................ok AA................ok AAA..............ok AAAAAA........ok "ok" one under one (4 Replies)
Discussion started by: mirusnet
4 Replies

4. Shell Programming and Scripting

printf in awk

Hi friends.. I am confused about awk printf option.. I have a comma separated file 88562848,21-JAN-08,2741079, -1188,-7433,TESTING 88558314,21-JAN-08,2741189, -1273,-7976,TESTING and there is a line in my script ( written by someone else) What is the use of command? I guess... (10 Replies)
Discussion started by: clx
10 Replies

5. Shell Programming and Scripting

Printf problem

I am having a major problem with printf, The more I pad it, the less I see :( The problem is in the first function, report Am I ruining output somewhere? I wont print out the names propely, it cuts them off or deletes them completely :( #!/bin/bash report() { printf "%-10s" STUD# ... (2 Replies)
Discussion started by: L0ckz0r
2 Replies

6. Shell Programming and Scripting

awk with printf

Hi, I am using the following code to assign a count value to a variable. But I get nothing. Do you see anything wrong here. I am new to all this. $CTR=`remsh $m -l $MACHINES{$m} -n cat $output | grep -v sent | grep \"$input\" | sort -u | awk '{print $5}'`; Upto sort - u it's... (2 Replies)
Discussion started by: nurani
2 Replies

7. Shell Programming and Scripting

find + printf help

Hi, I have a scripting assignment for an intro to linux class and I'm really confused about how to do something seemingly simple. I am supposed to Print the name of each file in the /data/dir16/subdir1 directory in the following format: "My name is: bin" The desired output example looks like:... (1 Reply)
Discussion started by: danschmidt
1 Replies

8. UNIX for Dummies Questions & Answers

Qsub and printf

Hello, I have some issue with qsub and the standard output : I launch a script that "echoes" the string "abc" and then executes a C program in which I print informations with the printf function ; the .o file contains "abc" but not the information displayed by printf. I also tried... (0 Replies)
Discussion started by: Shaderw
0 Replies

9. Shell Programming and Scripting

Printf statement

The printf statement pay_amount=$(printf "%013.3f" "$4") working perfectly at one path(xxx/home/rsh) and showing error (printf: 216.000: invalid number) at another path(/opt/xxxx/xxxx). what will be the reason? thanks in advance (4 Replies)
Discussion started by: reeta_shri
4 Replies

10. Programming

printf quirk

Hi, Could anyone explain me the logic behind the following program's output? int main() { printf("%d\n", printf("%d %d", 2, 2) & printf("%d %d", 2, 2)); printf("%d\n", printf("%d %d\n", 2, 2) & printf("%d %d\n", 2, 2)); } Ans: 2 22 23 2 2 2 2 4 (2 Replies)
Discussion started by: royalibrahim
2 Replies
Graphics::Primitive::Component(3pm)			User Contributed Perl Documentation		       Graphics::Primitive::Component(3pm)

NAME
Graphics::Primitive::Component - Base graphical unit DESCRIPTION
A Component is an entity with a graphical representation. SYNOPSIS
my $c = Graphics::Primitive::Component->new({ origin => Geometry::Primitive::Point->new({ x => $x, y => $y }), width => 500, height => 350 }); LIFECYCLE
prepare Most components do the majority of their setup in the prepare. The goal of prepare is to establish it's minimum height and width so that it can be properly positioned by a layout manager. $driver->prepare($comp); layout This is not a method of Component, but a phase introduced by the use of Layout::Manager. If the component is a container then each of it's child components (even the containers) will be positioned according to the minimum height and width determined during prepare. Different layout manager implementations have different rules, so consult the documentation for each for details. After this phase has completed the origin, height and width should be set for all components. $lm->do_layout($comp); finalize This final phase provides and opportunity for the component to do any final changes to it's internals before being passed to a driver for drawing. An example might be a component that draws a fleuron at it's extremities. Since the final height and width isn't known until this phase, it was impossible for it to position these internal components until now. It may even defer creation of this components until now. It is not ok to defer all action to the finalize phase. If you do not establish a minimum hieght and width during prepare then the layout manager may not provide you with enough space to draw. $driver->finalize($comp); draw Handled by Graphics::Primitive::Driver. $driver->draw($comp); METHODS
Constructor new Creates a new Component. Instance Methods background_color Set this component's background color. border Set this component's border, which should be an instance of Border. callback Optional callback that is fired at the beginning of the "finalize" phase. This allows you to add some sort of custom code that can modify the component just before it is rendered. The only argument is the component itself. Note that changing the position or the dimensions of the component will not re-layout the scene. You may have weird results of you manipulate the component's dimensions here. class Set/Get this component's class, which is an abitrary string. Graphics::Primitive has no internal use for this attribute but provides it for outside use. color Set this component's foreground color. fire_callback Method to execute this component's "callback". get_tree Get a tree for this component. Since components are -- by definiton -- leaf nodes, this tree will only have the one member at it's root. has_callback Predicate that tells if this component has a "callback". height Set this component's height. inside_bounding_box Returns a Rectangle that defines the edges of the 'inside' box for this component. This box is relative to the origin of the component. inside_height Get the height available in this container after taking away space for padding, margin and borders. inside_width Get the width available in this container after taking away space for padding, margin and borders. margins Set this component's margins, which should be an instance of Insets. Margins are the space outside the component's bounding box, as in CSS. The margins should be outside the border. maximum_height Set/Get this component's maximum height. Used to inform a layout manager. maximum_width Set/Get this component's maximum width. Used to inform a layout manager. minimum_height Set/Get this component's minimum height. Used to inform a layout manager. minimum_inside_height Get the minimum height available in this container after taking away space for padding, margin and borders. minimum_inside_width Get the minimum width available in this container after taking away space for padding, margin and borders. minimum_width Set/Get this component's minimum width. Used to inform a layout manager. name Set this component's name. This is not required, but may inform consumers of a component. Pay attention to that library's documentation. origin Set/Get the origin point for this component. outside_height Get the height consumed by padding, margin and borders. outside_width Get the width consumed by padding, margin and borders. finalize Method provided to give component one last opportunity to put it's contents into the provided space. Called after prepare. padding Set this component's padding, which should be an instance of Insets. Padding is the space inside the component's bounding box, as in CSS. This padding should be between the border and the component's content. page If true then this component represents stand-alone page. This informs the driver that this component (and any children) are to be renderered on a single surface. This only really makes sense in formats that have pages such as PDF of PostScript. prepare Method to prepare this component for drawing. This is an empty sub and is meant to be overridden by a specific implementation. preferred_height Set/Get this component's preferred height. Used to inform a layout manager. preferred_width Set/Get this component's preferred width. Used to inform a layout manager. to_string Get a string representation of this component in the form of: $name $x,$y ($widthx$height) visible Set/Get this component's visible flag. width Set/Get this component's width. AUTHOR
Cory Watson, "<gphat@cpan.org>" BUGS
Please report any bugs or feature requests to "bug-geometry-primitive at rt.cpan.org", or through the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive>. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes. COPYRIGHT &; LICENSE Copyright 2008-2009 by Cory G Watson. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. perl v5.12.3 2011-06-02 Graphics::Primitive::Component(3pm)
All times are GMT -4. The time now is 02:57 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy