Sponsored Content
Operating Systems Solaris external tape drive DAT 72 problem Post 302332653 by TonyFullerMalv on Thursday 9th of July 2009 06:07:08 PM
Old 07-09-2009
A tape drive as with any SCSI device has to be set to a bus address that is not the same as any other device on the same SCSI bus, I hope someone else can confirm that tape device are usually set to target address 3 or 4. While down at OBP's ok prompt you should see the tape drive listed when you run a:
ok> probe-scsi-all
once you can see it listed there then do a reconfiguration boot:
ok> boot -r
to get Solaris to "see" the tape drive, and as you have already suggested running:
# mt -f /dev/rmt/0 status
or
# mt -f /dev/rmt/1 status
is a good test for the tape once running Solaris.
 

10 More Discussions You Might Find Interesting

1. Linux

How do l install Travan Tape drive 20/40 DAT on Redhat 8.0

Hi, Will someone help in giving the clue to installating Travan Tape drive on Redhat 8.0 Kayode (1 Reply)
Discussion started by: kayode
1 Replies

2. Solaris

mounting an external scsi tape drive

hi- I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming... (9 Replies)
Discussion started by: ECBROWN
9 Replies

3. Solaris

Problem with SCSI DAT drive on Ultra 10

I will be honest I am quite new to UNIX and Solaris so this may be a simple thing. I have just purchased a Sun (rebranded HP obviously) DAT DDS3 SCSI tape drive for my Sun Ultra 10 running Solaris 10. I have previously fitted a SCSI card to the box which has configured ok and can be seen from... (1 Reply)
Discussion started by: mattw
1 Replies

4. SCO

DAT drive problem in sco

my server os version is openserver 5.0.6.from past few days it is giving problem while taking backup.it is giving error such that "TAPE WRITE ERROR".anyone can help to come out of this. (3 Replies)
Discussion started by: prakrithi
3 Replies

5. SCO

Tape drive problem

I replaced a HP Superstore Dat 40 with another HP Superstore Dat 40, but my backupedge software keeps putting up error code 1 (device not found) I have tried reinstaling the drive as DAT Alad stp 0 6 0 0. I'm not a computer expert but willing to have a go. I went into Backupedge to try and format a... (2 Replies)
Discussion started by: James Zwecker
2 Replies

6. AIX

external DDS4 Tape Drive

Hi folks, I've got a little problem concerning my external dds4 tape drive. I've got 2 rs6000 systems, one has a external dds4 tape drive attached, I want to attach the tape drive to the other rs6000 system so that i can restore data from the 1st rs6000 on to the second. Does anybody has... (3 Replies)
Discussion started by: Erik Rooijmans
3 Replies

7. Solaris

Hard Error:DAT Tape Drive

Well I have just added new tape drive to my server (lto) However I am getting few errors in using it. I have checked status with #iostat -En : giving me few hard errors, few soft errors and execution error. Also tape status is not visible as "no sense" its coming as "no additional sense". I... (5 Replies)
Discussion started by: saurabh84g
5 Replies

8. AIX

Tape Drive Problem.

Dear all, I have ultriam3 tape. It is connected my LPAR. I have that the Sl.Nos. and slot number. but run the cfmgr i am not getting the tape drive. I have fired the command lsdev -Cc tape but no reply. how will i configure the tape in LPAR? Please suggest. It is very urgent. (3 Replies)
Discussion started by: pernasivam
3 Replies

9. AIX

Tape Drive problem

Hi, I'm at AIX 5.3. My EOD program is giving following error while writing to tape: Can't write output cpio: Media Surface error Failed on Shell-script cd /; cpio -ocB 2 >> /autoline/misc/logs/bk.CopyToTape < /autoline/work/BACKUP.01022 1>/dev/rm0 I have tried with several new tapes,... (2 Replies)
Discussion started by: tayyabq8
2 Replies

10. UNIX for Beginners Questions & Answers

Problem setting path to external hard drive as a variable

Hello all, I am EXTREMELY new to using bash and I have a bit of a problem: I'm trying to set up a shell script that can 1.) take one of several giant files off of an external hard drive 2.) use it as input for scripts on my laptop's hard drive ... (3 Replies)
Discussion started by: machine_spirit
3 Replies
mdbFontEncoding(5)						 The m17n Library						mdbFontEncoding(5)

NAME
mdbFontEncoding - Font Encoding DESCRIPTION
The m17n library loads information about the encoding of each font form the m17n database by the tags <font, encoding>. The data is loaded as a plist of this format. FONT-ENCODING ::= PER-FONT * PER-FONT ::= '(' FONT-SPEC ENCODING [ REPERTORY ] ')' FONT-SPEC ::= '(' [ FOUNDRY FAMILY [ WEIGHT [ STYLE [ STRETCH [ ADSTYLE ]]]]] REGISTRY ')' ENCODING ::= SYMBOL FONT-SPEC is to specify properties of a font. FOUNDRY to REGISTRY are symbols corresponding to Mfoundry to Mregistry property of a font. See m17nFont for the meaning of each property. For instance, this FONT-SPEC: (nil alice0 lao iso8859-1) should be applied to all fonts whose family name is 'alice0 lao', and registry is 'iso8859-1'. ENCODING is a symbol representing a charset. A font matching FONT-SPEC supports all characters of the charset, and a character code is mapped to the corresponding glyph code of the font by this charset. REPERTORY is a symbol representing a charset or 'nil'. Omitting it is the same as specifying ENCODING as REPERTORY. If it is not 'nil', the charset specifies the repertory of the font, i.e, which character it supports. Otherwise, whether a specific character is supported by the font or not is asked to each font driver. For so called Unicode fonts (registry is 'iso10646-1'), it is recommended to specify 'nil' as REPERTORY because such fonts usually supports only a subset of Unicode characters. COPYRIGHT
Copyright (C) 2001 Information-technology Promotion Agency (IPA) Copyright (C) 2001-2011 National Institute of Advanced Industrial Science and Technology (AIST) Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License <http://www.gnu.org/licenses/fdl.html>. Version 1.6.2 12 Jan 2011 mdbFontEncoding(5)
All times are GMT -4. The time now is 12:23 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy