aix 4.2 : using dd of=/dev/rmt0 producing error Post: 302331746

10 More Discussions You Might Find Interesting

1. AIX

mt -f /dev/rmt0.1 status

Hello all, Anyboby knows what is the reason by which the ouput of the command mt -f /dev/rmt0.1 status on AIX does not show the same information that in the rest of platforms UNIX (Solaris, HP-UX, ...)? Then, what command of AIX is similar to mt- f /dev/rmt0.1 status of Solaris? We need it to...

2. Solaris

What is /dev/tty /dev/null and /dev/console

Hi, Anyone can help My solaris 8 system has the following /dev/null , /dev/tty and /dev/console All permission are lrwxrwxrwx Can this be change to a non-world write ?? any impact ??

3. AIX

Piping to /dev/rmt0 tape ?

I am trying to find a way to do the following on an AIX 4.2 with Korn: tar cvfpdl - . | compress > /dev/rmt0 The /dev/rmt0 is the device we use when we tar directly to it. I want to compress a folder's content to tape. Our current TAR does not have compression at all. We only have...

4. AIX

/dev/rmt0 pointed to from an NFS of another server ?

I only about the principle of filesystems from the very basics on Linux and Windows. But I want to know if it is possible on an AIX 4.2 to create one NFS on a server which is pointing to a tape drive (/dev/rmt0) of another server ? This is because we several backups to do on a 5 servers that...

5. UNIX for Dummies Questions & Answers

Script producing error, Program to calculate maximum number

Hi folks, Here i have written a shell script to calculate a maximum number from 10 numbers entered on command line. max=0 echo Enter 10 numbers , one at a time for i in 1 2 3 4 5 6 7 8 9 10 do read n max=`expr $max + $n` if --- At this last step there is some problem, it gives error...

6. AIX

rmt0 allows get increased .. !

rmt0 allows get increased .. ! I have faced this issue in my AIX server, rmt0 allows get increased and it's filled /root till 100% There is no tape in tape drive why it's increased? Pls advice..

7. Homework & Coursework Questions

iptables producing 'Unknown error 18446744073709551615' inRed Hat Enterprise Linux Server 5.5

Creating a large number of rules such as 100000, iptables will produce errors after 42000 rules "iptables: Unknown error 18446744073709551615". But another machine where i have debian virtual machine I can easily run the sciprt of 100000 of rules I am waiting for your reply 4....

8. AIX

"Please mount volume 2 on /dev/rmt0.1" message during mksysb restore

Dear all First of all, my English not so good. We have p52a (production server) and p52a (test server). Tape drives are VXA2. When both servers were AIX 5.3, mksysb on production server and restoring to test server was OK. The production server was AIX 5.3 and recently upgraded to...

9. Shell Programming and Scripting

Automating partitioning setup of /dev/sda on /dev/sdc

Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc How would I parse the below information and initialize variables (an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions? Something along the lines of: sgdisk -n...

10. AIX

AIX native SNMP producing limited results when walking MIB tree

The company I work for has various AIX servers that I've recently migrated to AIX 7.1 (from 6.1). Some are powerHA clusters some are not. Likewise, the systems engineer that I replaced had net-snmp installed on said clustered systems. Long story short I am re-invoking AIX's native SNMP (v3) for...

LEARN ABOUT XFREE86

malo

MALO(4) 						   BSD Kernel Interfaces Manual 						   MALO(4)

NAME

     malo -- Marvell Libertas IEEE 802.11b/g wireless network driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device malo
	   device pci
	   device wlan
	   device firmware

     Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5):

	   if_malo_load="YES"

DESCRIPTION

     The malo driver provides support for Marvell Libertas 88W8335 based PCI and Cardbus network adapters.  malo supports station and monitor mode
     operation.  Only one virtual interface may be configured at any time.  For more information on configuring this device, see ifconfig(8).

     This driver requires the malofw firmware kernel module be installed before it will work.  The firmware files are not publicly available.  A
     port of the firmware can be found at:

	   http://weongyo.org/project/malo/malo-firmware-1.4.tar.gz

     The firmware kernel module can be installed by extracting the archive and running 'make install clean' in the malo-firmware-1.4 directory.

HARDWARE

     The following cards are among those supported by the malo driver:

	   Card 		  Chip	     Bus	Standard
	   Netgear WG311v3	  88W8335    PCI	b/g
	   Tenda TWL542P	  88W8335    PCI	b/g
	   U-Khan UW-2054i	  88W8335    PCI	b/g

EXAMPLES

     Join an existing BSS network (i.e., connect to an access point):

	   ifconfig wlan create wlandev malo0 inet 192.168.0.20 
	       netmask 0xffffff00

     Join a specific BSS network with network name ``my_net'':

	   ifconfig wlan create wlandev malo0 ssid my_net up

     Join a specific BSS network with 64-bit WEP encryption:

	   ifconfig wlan create wlandev malo0 ssid my_net 
		   wepmode on wepkey 0x1234567890 weptxkey 1 up

SEE ALSO

     cardbus(4), pci(4), wlan(4), wlan_ccmp(4), wlan_tkip(4), wlan_wep(4), ifconfig(8), wpa_supplicant(8)

HISTORY

     The malo device driver first appeared in FreeBSD 7.1.

BSD
								 October 21, 2009							       BSD