07-07-2009
Quote:
Originally Posted by
achenle
/etc/rc2.d/S69inet:ndd -set /dev/ce instance 0
/etc/rc2.d/S69inet:ndd -set /dev/ce adv_1000fdx_cap 0
/etc/rc2.d/S69inet:ndd -set /dev/ce adv_1000hdx_cap 0
/etc/rc2.d/S69inet:ndd -set /dev/ce adv_100fdx_cap 1
/etc/rc2.d/S69inet:ndd -set /dev/ce adv_100hdx_cap 0
/etc/rc2.d/S69inet:ndd -set /dev/ce adv_10fdx_cap 0
/etc/rc2.d/S69inet:ndd -set /dev/ce adv_10hdx_cap 0
/etc/rc2.d/S69inet:ndd -set /dev/ce adv_autoneg_cap 1 <-----
Put the above into a script file to force autoneg from server end too.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
On the following script that I get an error when I try to execute as root:
#./mv_log.sh
bash: /root/util/mv_log.sh: Permission denied
#!/usr/bin
datetag=`date --date='1 day ago' +"%b%d%Y"`
logname=`find /opt/bea/wlserver6.1/config/*/logs/ -iname 'access.log0*' -mtime -1 -print`
mv... (4 Replies)
Discussion started by: darthur
4 Replies
2. UNIX for Dummies Questions & Answers
I am new to unix, and this is my 1st post on this board. Looking for some advice about a cron job in my server.
I am running a cron task that references a script which runs several other scripts and compiles them into a report and emails it to me. If I run the script manually, I will... (2 Replies)
Discussion started by: Steeler_fan
2 Replies
3. UNIX for Dummies Questions & Answers
Hello,
After seeing in a Unix cheatsheet that I could add commands into a file and run that file as a command to save on typing, i tried it with this:
#! /bin/csh
# Backup website excluding directories that do not change
rsync -e "ssh -p 2222" -axzvc --progress --stats --compress-level=9... (9 Replies)
Discussion started by: patwa
9 Replies
4. Solaris
Hi All,
I'm getting this all the time with a regular user (after I do su - and smc):
It appears you are attempting to run the graphical
Solaris Management Console from a terminal which does
not have a suitable 'DISPLAY' environment. Please check
your 'DISPLAY' settings and that the user... (5 Replies)
Discussion started by: itik
5 Replies
5. Ubuntu
I am running Ubuntu 8.1 on a Toshiba Satellite P105-S9337 with built-in Bluetooth hardware. I cannot get the Bluetooth hardware to work with my Microsoft Bluetooth mouse.
I have installed the tosh software with no luck.
Does anyone have an idea as to what to try. I have several kernel mods... (0 Replies)
Discussion started by: tjloeb
0 Replies
6. UNIX for Dummies Questions & Answers
I ran into this issue and thanks to various postings in various forums, was
able to figure out the solution but didn't see one posting that laid the
whole issue out cleanly. So thought the following might help others ...
------------------------------------------------------------------------... (2 Replies)
Discussion started by: oxysep
2 Replies
7. Solaris
Hi All,
I have server SF E4900 with kernel 5.10 Generic_118833-24. My problem is why interface ce1 always up and down...?
Please look at below
Mar 5 01:33:06 scsi: WARNING: /scsi_vhci/ssd@g600a0b8000266610000006ab45cfb878 (ssd0):
Mar 5 01:33:06 SCSI transport failed: reason... (4 Replies)
Discussion started by: mbah_jiman
4 Replies
8. Solaris
Recently one drive (disk 2) was totally dead. I swapped the dead drive with a new drive. But the Solaris 10 could not recognize the drive:
root\> format
Searching for disks...done
c1t2d0: configured with capacity of 33.92GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620... (4 Replies)
Discussion started by: BigG
4 Replies
9. Shell Programming and Scripting
I am using while read do/ done to retrieve menu item.
Works as advertised, no problem.
I am using this hack function "pause" to stop script execution and wait for keyboard "enter" key to continue. Sort of break point function. Also works fine with one exception - it does not work when used... (4 Replies)
Discussion started by: annacreek
4 Replies
10. UNIX for Beginners Questions & Answers
Can anyone offer any advice on how to modify the script below to work on a new system we have, that has no graphics capability? We admin the system through a serial RAS device. I've tried running the below script through the RAS and through an ssh -X session. It failed with something like "GTK... (3 Replies)
Discussion started by: yelirt5
3 Replies
ndd(1M) System Administration Commands ndd(1M)
NAME
ndd - get and set driver configuration parameters
SYNOPSIS
ndd [-set] driver parameter [value]
DESCRIPTION
ndd gets and sets selected configuration parameters in some kernel drivers. Currently, ndd only supports the drivers that implement the
TCP/IP Internet protocol family. Each driver chooses which parameters to make visible using ndd. Since these parameters are usually
tightly coupled to the implementation, they are likely to change from release to release. Some parameters may be read-only.
If the -set option is omitted, ndd queries the named driver, retrieves the value associated with the specified parameter, and prints it. If
the -set option is given, ndd passes value, which must be specified, down to the named driver which assigns it to the named parameter.
By convention, drivers that support ndd also support a special read-only parameter named ``?'' which can be used to list the parameters
supported by the driver.
EXAMPLES
Example 1: Getting Parameters Supported By The TCP Driver
To see which parameters are supported by the TCP driver, use the following command:
example% ndd /dev/tcp ?
The parameter name ``?'' may need to be escaped with a backslash to prevent its being interpreted as a shell meta character.
The following command sets the value of the parameter ip_forwarding in the dual stack IP driver to zero. This disables IPv4 packet forward-
ing.
example% ndd -set /dev/ip ip_forwarding 0
Similarly, in order to disable IPv6 packet forwarding, the value of parameter ip6_forwarding
example% ndd -set /dev/ip ip6_forwarding 0
To view the current IPv4 forwarding table, use the following command:
example% ndd /dev/ip ipv4_ire_status
To view the current IPv6 forwarding table, use the following command:
example% ndd /dev/ip ipv6_ire_status
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO
nca(1), ioctl(2), attributes(5), arp(7P), ip(7P), ip6(7P), tcp(7P), udp(7P)
NOTES
The parameters supported by each driver may change from release to release. Like programs that read /dev/kmem, user programs or shell
scripts that execute ndd should be prepared for parameter names to change.
The ioctl() command that ndd uses to communicate with drivers is likely to change in a future release. User programs should avoid making
dependencies on it.
The meanings of many ndd parameters make sense only if you understand how the driver is implemented.
SunOS 5.10 8 Nov 1999 ndd(1M)