Sponsored Content
Full Discussion: SVM, mirroring
Operating Systems Solaris SVM, mirroring Post 302330636 by beginningDBA on Thursday 2nd of July 2009 01:03:01 AM
Old 07-02-2009
Question SVM, mirroring

Really sorry for the long posting. But i would really want to clear all the doubts.

I have 2 disk c0t0d0 & c0t1d0, i wanted to mirror c0t1d0 (mirror) to c0t0d0 (main).

Creating state database replica:
metadb -a -c3 -f c0t0d0s7

------------------------------------------------------------------
Question:
1. Should i create the state database replica on c0t0d0s7 or c0t1d0s7?
2. Should i create all the replicas on the same slice?
------------------------------------------------------------------

Creating volumes:
metainit -f d11 1 1 c0t0d0s1
metainit -f d12 1 1 c0t1d0s1

Creating one-way mirror:
metainit d10 -m d11

Creating two-way mirror:
metattach d10 d12

------------------------------------------------------------------
Question:
1. Does the above command means that d11(c0t0d0s1) is two-way mirrored to d12(c0t1d0s1)?
2. Should i create mirror and volumes on all the 8 slices (s0-s7)?
3. Is it creating two-way mirror means that when i delete something on the main/mirror volume, the other volume will also do the same?
------------------------------------------------------------------

This is my understanding from reading through the webs. If i get it all wrong, please kindly point out my mistake.

Thanks in advance for reading or solving the thread.
 

10 More Discussions You Might Find Interesting

1. Solaris

Change the name in SVM

gurus, i have configured the LUN's in solaris 10.after labeled the disk,i have added the disk into one of the soft partition using metattach d0 c5t1000d10s6.actully before that i should confiure the powermt and than i should have add metattch d0 emcpowerc2.i forget to do that and increased... (0 Replies)
Discussion started by: rjay.com
0 Replies

2. Solaris

mirroring root disk using svm - but no free slices for metadb's

Hi all, we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this? In the past we have always kept slice 7 free -... (8 Replies)
Discussion started by: badoshi
8 Replies

3. Solaris

Root Disk mirroring in SVM

Dear All, Please help me to configure root mirroring using SVM in Solaris 9. Thanks and Regards, Lakkireddy BR (3 Replies)
Discussion started by: lbreddy
3 Replies

4. UNIX for Dummies Questions & Answers

SVM doubt

i have taken two separate disk A and B created 4 slices in each A b s4 s4 s5 s5 s6 s6 s7 s7 took slices s4 of A and slice s6 0f B ---created a meta device d0 took slices s4 of B and slice s6 0f A---created a meta device d1 created main mirror d2 using d0... (1 Reply)
Discussion started by: vivek_ng
1 Replies

5. UNIX for Advanced & Expert Users

SVM

How to list out multiple Disk sets in SVM # metaset -s <disksetname> --- This will list out only one diskset but I need a list of disk sets configured for the node. Is there any command,please let me know ... Thanks in advance. (1 Reply)
Discussion started by: pramath
1 Replies

6. UNIX for Advanced & Expert Users

What is interlace value in SVM?

Hi All, I want to know what is the Interlace value in SVM and what is the need of this ? regards, prashant (1 Reply)
Discussion started by: prashant2507198
1 Replies

7. Solaris

SVM Creation

Hello, I recently patched my Solaris 10 box and found out that few of the apps are not working. Fortunately, I had detached the mirroring prior to patching, so I just booted into my secondary disk and found that my apps are working.... The problem is this was way back in last month....see... (14 Replies)
Discussion started by: zigi_p5
14 Replies

8. Solaris

Fsck with SVM

Hello I want to ask that how to mount and run fsck in SVM disk.In my scenario if i have to disks c0t0d0 and c0t1d0 these two disks are in Mirroring (raid1) if i want to run fsck on the disks than below are the right steps? ok boot cdrom -s mount /dev/dsk/c0t0d0s0 /a cd /a fsck... (3 Replies)
Discussion started by: jhonnybravo
3 Replies

9. Solaris

SVM ISSUE...

Dear All, I face some errors in SVM.Need help. Actually couple of days ago i got a call from one of the customer mentioning that one of the sub-mirror was in Need maintance state. So we replaced that disk. After Replacing the disk it comes back to "Okay" State. But the Error are... (3 Replies)
Discussion started by: sudhansu
3 Replies

10. Solaris

Root disk mirroring in SVM

I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
Discussion started by: Laxxi
6 Replies
metaoffline(1M) 					  System Administration Commands					   metaoffline(1M)

NAME
metaoffline, metaonline - place submirrors offline and online SYNOPSIS
/usr/sbin/metaoffline -h /usr/sbin/metaoffline [-s setname] [-f] mirror submirror /usr/sbin/metaonline -h /usr/sbin/metaonline [-s setname] mirror submirror DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command. A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted. When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif- ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline. The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode. A submirror that has been taken offline with the metaoffline command can only be mounted as read-only. OPTIONS
Root privileges are required for all of the following options except -h. -f Forces offlining of submirrors that have slices requiring maintenance. -h Displays usage message. -s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com- mand to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices. mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online. submirror Specifies the metadevice name of the submirror to be either taken offline or put online. EXAMPLES
Example 1: Taking a Submirror Offline This example takes one submirror, d9, offline from mirror d10. # metaoffline d10 d9 EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) Solaris Volume Manager Administration Guide NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode. SunOS 5.10 12 Apr 2004 metaoffline(1M)
All times are GMT -4. The time now is 06:15 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy