07-01-2009
Hi,
you're wrong, the broadcast is the address for the net not for
the gateway.
Setup yur server with
ifconfig eri0 192.168.2.160 netmask 255.255.255.0 broadcast 192.168.2.255 up
Put your hostname in /etc/hostname.eri0
put hostname and ip-address in /etc/inet/hosts
<your hostname> 192.168.2.160
put netmask in /etc/inet/netmasks
192.168.2.0 255.255.255.0
Then your settings will apply at reboot.
cu
lowbyte
9 More Discussions You Might Find Interesting
1. IP Networking
:confused: HI,
We have 2 servers ( win 2003 + sun 5.8 ) and we run a rsh from the NT to the UNIX.
The program runs a shell script on the UNIX and waits for the answer in the EOF.
How ever, after period of appx 2 min there is a reply "Recv failed:Connection reset by peer".
while the... (5 Replies)
Discussion started by: eyalush
5 Replies
2. Shell Programming and Scripting
I use ssh to work on the server (OS X 10.4.x) remotely from home (Debian / OS X 10.5.3). If I leave my machine idle, I get disconnected after a couple of minutes. I get the following error message:
Read from remote host "server name": Connection reset by peer
Connection to "server name" closed.... (2 Replies)
Discussion started by: osxhawk
2 Replies
3. Shell Programming and Scripting
hi
i am connecting to a remote server using sftp protocol.
i am using the command like "sftp USER01@122.10.12.45"
then i got the error "Couldn't read packet: Connection reset by peer"
please help its very urgent (5 Replies)
Discussion started by: Satyak
5 Replies
4. IP Networking
hi all.
am running postgresql in a vm on debian server.
i have some client programs connecting to the db.
when i check the logs of postgresql i see "connection reset by peer"
can someone help me with this issue...
thanks. (1 Reply)
Discussion started by: coolatt
1 Replies
5. UNIX for Advanced & Expert Users
Hello
I'm facing the above problem while doing a performance run. I've a script which I'm launching from my windows desktop using mozilla. The script will invoke backend action on a Solaris host which in turn feeds the records to a driver located on a linux box(Cent OS).
What's happening is... (1 Reply)
Discussion started by: subramanyab
1 Replies
6. IP Networking
I am looking for advice on a router. I am new to Linux and am trying to use Limewire and Ktorent and can make no connection. Limewire indicates I have a firewall. I have a Linksys router WRK54G and my guess is that is the problem. I have spent hours upon hours trying to get it to work using info... (0 Replies)
Discussion started by: Paul K
0 Replies
7. UNIX for Dummies Questions & Answers
I have created a script to cat the contents of a log file and pipe it to head and tail so I can get specific lines.
When I do this I sometimes randomly get the error
"cat: write error: Connection reset by peer". It is completely sporatic and sometimes it doesnt happen and sometimes it does... (4 Replies)
Discussion started by: atelford
4 Replies
8. IP Networking
Hi,
I am trying to add a static route in one of 3 server (S3) so that I can access the main application server (S1). But problem is, the server (S3) where I am trying to add static route is connected with another server (S2) which is in same private network of application server (S1).
I have... (9 Replies)
Discussion started by: ImranBD
9 Replies
9. Red Hat
Hi Guys,
I can't SSH to a remote system - connection reset by peer..any ideas ?
-The Source is Linux, the Remote is Windows
-The remote has OpenSSH running on Port 22 - Telnet confirms port is open
-User1 has a RSA2 Key (2048) key, which is capture in the 1010101-pub.key specified by the... (1 Reply)
Discussion started by: stevie_velvet
1 Replies
LEARN ABOUT DEBIAN
vlan-interfaces
VLAN-INTERFACES(5) File formats VLAN-INTERFACES(5)
NAME
/etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format
DESCRIPTION
/etc/network/interfaces contains network interface configuration information for the ifup(8) and ifdown(8) commands. This manpage
describes the vlan extensions to the standard interfaces(5) file format.
Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which are gener-
ally needed when using (a lot of) vlans.
VLAN CREATION
Vlan interface definitions exist of the vlan interface name, and an optional 'raw-device' parameter. Vlan interfaces are numbered 1 to
4095. You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero. The following
example shows four ways to create a vlan with id 1 on interface eth0. They all result in different names.
iface eth0.1 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan1 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
iface eth0.0001 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan0001 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
# We don't have br support out of the box
iface br0.2 inet static
vlan-raw-device br0
address 192.168.1.1
netmask 255.255.255.0
# Aliases are ignored
iface br0.2:1 inet static
address 192.168.1.1
netmask 255.255.255.255
EXTRA IFACE OPTIONS
Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.
vlan-raw-device devicename
Indicates the device to create the vlan on. This is ignored when the devicename is part of the vlan interface name.
ip-proxy-arp 0|1
Turn proxy-arp off or on for this specific interface. This also works on plain ethernet like devices.
ip-rp-filter 0|1|2
Set the return path filter for this specific interface. This also works on plain ethernet like devices.
hw-mac-address mac-address
This sets the mac address of the interface before bringing it up. This works on any device that allows setting the hardware address
with the ip command.
AUTHOR
This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>
SEE ALSO
vconfig(8) interfaces(5)
vlan September 30 2007 VLAN-INTERFACES(5)