Aloha! I have just over 1k of users that have permissions that they shouldn't under our system. I need to parse a provided list of usernames, check their permissions file, and strip the permissions that they are not allowed to have. If upon the permissions strip they are left with no permissions,... (6 Replies)
STEP 1
# Set variable
FILE=/tmp/mainfile
SEARCHFILE =/tmp/searchfile
# THIS IS THE MAIN FILE.
cat /tmp/mainfile
Interface Ethernet0/0 "outside", is up, line protocol is up
Hardware is i82546GB rev03, BW 100 Mbps
Full-Duplex(Full-duplex), 100 Mbps(100 Mbps)
MAC address... (6 Replies)
Hello,
I have two files that I need to compare and print out the line from file2 that has the first 6 fields matching the first 6 fields in file1. Complicating this are the following restrictions
1. file1 is only a few thousand lines at most and file2 is greater than 2 million
2. I need to... (7 Replies)
Hi All,
As mentioned in the title I have two text files and I would like to replace line number 5 of file #1 with line number 4 of file #2
e.g.
file 1
wqwert
4.4464002
3
319
286
369
46.320002
56.150002
45.100002
1
1
1
0.723 (12 Replies)
So, the beginning of my script will cat & grep a file with the output directed to a new file. The data I have in this file needs to be parsed, read and evaluated.
Basically, I need to identify the latest date/time stamp and then calculate whether or not it is within 15 minutes of the current... (1 Reply)
Good day,
I have a list of regular expressions in file1. For each match in file2, print the containing line and the line after.
file1:
file2:
Output:
I can match a regex and print the line and line after
awk '{lines = $0} /Macrosiphum_rosae/ {print lines ; print lines } '
... (1 Reply)
Hello,
I need a program that read a file line by line and prints out lines 1, 2 & 3 after an empty line... An example of entries in the file would be:
SRVXPAPI001 ERRO JUN24 07:28:34 1775
REASON= 0000, PROCID= #E506 #1065: TPCIPPR, INDEX= 003F
... (8 Replies)
I have a test file with the following format, It contains the username_date when the user was locked from the database.
$ cat lockedusers.txt
TEST1_21062016
TEST2_02122015
TEST3_01032016
TEST4_01042016
I'm writing a ksh script and faced with this difficult scenario for my... (11 Replies)
HI All,
I am aware of reading one file line by line but now my requirement is to read 2 file line by line as below explained.
I have 2 files as below file 1 with spaces and file 2 same as file1 but without space and () brackets
now i have to read both file line by line and use first line of... (13 Replies)
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)