06-27-2009
t5220- pls upgrade the firmware first. It has alot of known bugs on system hang issues
10 More Discussions You Might Find Interesting
1. Solaris
Hi Peeps,
Apologies if this is the wrong forum for this, if it is can someone point me in the direction of the right one?
Problem:
I've dropped an XVR-300 Graphics card into a T5220, configured it to output and input from the screen and keyboard instead of the virtual console. It... (3 Replies)
Discussion started by: callmebob
3 Replies
2. Solaris
We used kstat on netra240/440 to check if the link is full duplex. So we do something like:
bash-3.00# kstat -pc net bge:1::/'link_duplex'/ | cut -f2
2
The output 2 indicates the link is full duplex. This kind of check worked all right for Netra 240/440 systems.
However, the nxge... (2 Replies)
Discussion started by: illcar
2 Replies
3. Solaris
I 've 2 different T5220 and both are showing different prompts when i ssh to the console.
1. Shows sc> ALOM
2. Shows -> ILOM
as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?
and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies
4. Solaris
We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid?
I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
Discussion started by: JerryHone
9 Replies
5. Solaris
Hi,
We have two T5220 servers in our datacentre
one server is showing 64 processors online
and another showing 32 processors online
two are newly purchased, there is no hardware faults in this server
one server has 64gb memory and it shows 64 processors,
and other having 32gb memory and it... (5 Replies)
Discussion started by: rajasekg
5 Replies
6. Solaris
I have a new T5220 racked at our remote office and the guys who racked it does not know how to configure the SP on the system .. is there any way i can do it remotely ? (1 Reply)
Discussion started by: fugitive
1 Replies
7. Solaris
Hi Guys and Gals,
Wondering if anyone could help me, tricky one this.
Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc.
But no matter what version of Solaris 10 you use, when you do a boot cdrom... (1 Reply)
Discussion started by: callmebob
1 Replies
8. Solaris
Hello guys,
can anyone give me some advice on how to perform
clean installation of Solaris 10 on T5220 ?
I am connected with serial management port on the machine,
i have the ok promt and now i should eject the dvdrom to insert
Solaris dvd into and start the clean install.
So how to do that... (3 Replies)
Discussion started by: tonijel
3 Replies
9. Solaris
Hi,
I got a (used) server to install Solaris 11 and wipe out every information on existing disks. There are 6 disks of 300GB and two disks of 146GB. I am not able to figure out, how to find out RAID (if there is any) and break it. Can anybody help me with that ? Below is configuration. I have... (18 Replies)
Discussion started by: solaris_1977
18 Replies
10. Solaris
Hi,
I want to install Solaris-11 on T5220. I created USB from sol-11_4-text-sparc.usb by usbcopy on another Solaris-11 servers, which looks like a good one.
I tried did "reset-all" and still same issue. Can I get some help on this.
{0} ok reset-all
Sun Netra T5220, No Keyboard
Copyright... (8 Replies)
Discussion started by: solaris_1977
8 Replies
LEARN ABOUT FREEBSD
bcmfw
BCMFW(8) BSD System Manager's Manual BCMFW(8)
NAME
bcmfw -- firmware download utility for Broadcom BCM2033 chip based Bluetooth USB devices
SYNOPSIS
bcmfw [-h] -f firmware_file_name -m mini-driver_file_name -n device_name
DESCRIPTION
The bcmfw utility downloads the specified mini-driver and firmware files to the specified device.
This utility will only work with Broadcom BCM2033 chip based Bluetooth USB devices. The identification is currently based on USB vendor
ID/product ID pair. The vendor ID should be 0x0a5c (USB_VENDOR_BROADCOM) and the product ID should be 0x2033.
Due to copyright issues I will no longer provide mini-driver and firmware files for the device. These files can be obtained from the Linux
BlueZ bluez-firmware package.
Visit http://www.bluez.org/download.html for details.
I am using the following files from the bluez-firmware-1.0 package:
MD5 (BCM2033-MD.hex) = 5580317158d07fc4ace90af04f8e1c73
MD5 (BCM2033-FW.bin) = b4e142b3272cfe5a84b32fda6b4b032f
The options are as follows:
-f firmware_file_name
Specify firmware file name for download.
-h Display usage message and exit.
-m mini-driver_file_name
Specify mini-driver file name for download.
-n device_name
Specify device name.
FILES
BCM2033-MD.hex Mini-driver image.
BCM2033-FW.bin Firmware image.
/dev/ubtbcmfwN.EE Endpoint EE of device N.
EXIT STATUS
The bcmfw utility exits 0 on success, and >0 if an error occurs.
EXAMPLES
To download the firmware into the /dev/ubtbcmfw0 device:
bcmfw -n ubtbcmfw0 -m BCM2033-MD.hex -f BCM2033-FW.bin
SEE ALSO
ubtbcmfw(4), ugen(4)
AUTHORS
Maksim Yevmenkin <m_evmenkin@yahoo.com>
BUGS
Most likely. Please report if found.
BSD
March 31, 2003 BSD