Sponsored Content
Operating Systems Solaris Unable to connect to Internet Post 302328044 by srinivas2828 on Tuesday 23rd of June 2009 08:29:13 AM
Old 06-23-2009
Unable to connect to Internet

Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can able to ping my gateway and other machines in the same network btw No proxy server but my institute have firewall
but why it is behaving like this...any help
Code:
#ifconfig iwk0
iwk0: flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4,CoS> mtu 1500 index 2
	inet 192.168.11.14 netmask ffffff00 broadcast 192.168.11.255

# cat /etc/hosts
127.0.0.1 loghost solaris

#svcs physical
disabled       14:24:57 svc:/network/physical:default
online         14:24:58 svc:/network/physical:nwam

bash-3.2$ cat /etc/resolv.conf
nameserver 192.168.1.234
nameserver 202.88.238.3
nameserver 202.88.238.5
bash-3.2$ nslookup www.google.com
server:      192.168.1.234
address:     192.168.1.234#53

Non-authoritative answer:
www.google.com canonical name = www.l.google.com.
Name: www.l.google.com
address: 209.85.153.104


Last edited by srinivas2828; 06-23-2009 at 09:30 AM.. Reason: forgot to add text
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Cannot connect to the Internet

I running HPUX 11.0, Netscape gives me an error "Unable to locate Server" when using a www.something.com address. If I use an IP address I get past the router and onto the Internet. My workstation can get to the Router @ 192.168.0.1 and also it's local APACHE server. I have DHCP enabled... (8 Replies)
Discussion started by: johnalt
8 Replies

2. Solaris

trying to connect to internet

i have just installed solaris 10 on a 60 gb hard drive. now im trying to install my nic driver but when i put in the floppy disk for the nic card it cant read it, so then i found that i have to mount the floppy drive and i tried putting in the mount command but i dont know where to mount it and if... (38 Replies)
Discussion started by: vutty81
38 Replies

3. Solaris

How to connect to Internet

Hi I installed solaris developer edition 1/08 today.I want to connect to Broadband internet through my ADSL 2+ Modem/Router with a username and password. plz help in this case,I am new to sun solaris:confused: the modem itself is a router it worked well on ubuntu and red hat (3 Replies)
Discussion started by: santugvd
3 Replies

4. Linux

how to connect internet????

HI, Am using GPRS ( MOB # 3230 ) internet connection in windows Hw to use internet r connect in linux.. ( Red Hat Linux Ver.10 ) Please help me.. Thanks in adv.. (1 Reply)
Discussion started by: bharath raja
1 Replies

5. UNIX for Advanced & Expert Users

Unable to connect to INTERNET using BSNL Broad band connection on Solaris-x86

Hi, Iam using BSNL broad band connection and i have installed two OS Xp & Sun solaris -x86 on my machine.Iam able to use INTERNET on windows Xp but not able to do it on solaris x86. I have tried using DHCP concept as well as sys-unconfig command in solaris but no results. When i use... (5 Replies)
Discussion started by: jayaprakash
5 Replies

6. Solaris

Can't connect to Internet

Dear freinds... I downloaded solaris for x86 and was able to configure the lan correctly.. I can ping and share with other destops through lan... but still I can't connect to internet ? can you please help.. I put my default gateway which is 192.168.1.1 to /etc/defaultrouter but with no use..... (13 Replies)
Discussion started by: yahyaaa
13 Replies

7. Virtualization and Cloud Computing

unable to connect internet on virtual machine

I have installed Oracle VM virtual box on Windows 7 and using LINUX (backtrack 5) as my virtual OS. The problem is i'm unable to connect to internet from my virtual OS. i'm using USB dongle (mobile broad band) to connect to internet from my host OS windows 7. I tried setting NAT in VM settings... (0 Replies)
Discussion started by: Arun_Linux
0 Replies

8. IP Networking

Unable to connect to internet on slackware 14.1 (hathway connection)

Hi, I have a wired internet connection of hathway provider. I would like to use the connection on my desktop as well as my laptop. My desktop pc has windows 7 and yesterday I installed slackware 14.1 (full installation) on my lenovo 3000 n100 laptop. Previously I had slacko puppy 5.7... (7 Replies)
Discussion started by: pinakbheed
7 Replies

9. Red Hat

Unable to connect to internet

Hello, I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news ! Now bad news or not so great news. My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Discussion started by: bluemind2005
0 Replies

10. Linux

Unable to connect guest VM to internet (QEMU via both 'User-mode networking' and 'TUN/TAP')

Hello, I installed FreeBSD 10.3 on AQEMU. I can't connect to internet in none of the modes of "Default, User-Mode Networking" and "TUN/TAP Networking". I am able to ping my host in the TAP networking mode (192.168.1.33 which is my IP addr in guest), but getting 'no route to host' for any... (1 Reply)
Discussion started by: temp-usr
1 Replies
icmp(7) 						 Miscellaneous Information Manual						   icmp(7)

NAME
icmp - Internet Control Message Protocol SYNOPSIS
#include <sys/socket.h> #include <netinet/in.h> The following is the socket call for sockets using the IPv4 address format: s = socket(AF_INET, SOCK_RAW, IPPROTO_ICMP); The following is the socket call for sockets using the IPv6 address format: s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6); DESCRIPTION
The Internet Control Message Protocol (ICMP) is the error and control message protocol used by the Internet Protocol (IP) and the Internet Protocol family. It may be accessed through a raw socket for network monitoring and diagnostic functions. ICMP sockets are connection- less, and are normally used with the sendto() and recvfrom() functions. The connect() function may also be used to fix the destination for future packets, in which case the read() or recv() and write() or send() functions may be used. Outgoing packets automatically have an IP header prepended to them (based on the destination address). Incoming packets are received with the IP header and options intact. ERRORS
If a socket operation fails, errno may be set to one of the following values: The socket is already connected. This error occurs when try- ing to establish connection on a socket or when trying to send a datagram with the destination address specified. The destination address of a datagram was not specified, and the socket has not been connected. The system ran out of memory for an internal data structure. An attempt was made to create a socket with a network address for which no network interface exists. RELATED INFORMATION
Functions: send(2), recv(2) Files: netintro(7), inet(7), ip(7) RFC 792, "Internet Control Message Protocol" RFC 2463, "Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6)" delim off icmp(7)
All times are GMT -4. The time now is 08:17 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy