Re-created the disk array volume with the Default file system option and then tried again to mount the file system without success.
Anyone any suggestions where I'm going wrong?
Thanks, DD.
Actions shown below :-
Code:
root@sesame # reboot -- -r
root@sesame # /usr/sbin/devfsadm
root@sesame #
root@sesame # format
Searching for disks...done
c4t0d0: configured with capacity of 1395.79GB
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c4t0d0 <SUN-LCSM100_S-0735-1.36TB>
/pci@7c0/pci@0/pci@9/LSILogic,sas@0/sd@0,0
Specify disk (enter its number): 2
selecting c4t0d0
[disk unformatted]
Disk not labeled. Label it now? y
Warning: error writing EFI.
Write label failed
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> partition
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> print
Current partition table (original):
Total disk sectors available: 2927157214 + 16384 (reserved sectors)
Part Tag Flag First Sector Size Last Sector
0 root wm 34 128.00MB 262177
1 swap wu 262178 128.00MB 524321
2 unassigned wu 0 0 0
3 unassigned wm 0 0 0
4 unassigned wm 0 0 0
5 unassigned wm 0 0 0
6 usr wm 524322 1.36TB 2927157213
8 reserved wm 2927157214 8.00MB 2927173597
partition> quit
format> quit
root@sesame # cd /
root@sesame # mount /dev/dsk/c4t0d0s6 /array01
mount: I/O error
mount: Cannot mount /dev/dsk/c4t0d0s6
I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it.
I have one StorageTek 2540 array that I would like to connect to the T2000.
For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)
Hi!
I have Sun StorageTek 2540 FC array and CAM works very slowly - I can wait for software response even more than 2 minutes... I run this software on Windows machine with Firefox Web Browser but speed is terrible... How can I make it works at least a little bit faster?.. (2 Replies)
In Sun manuals, I didn't find how to backup Sun StorageTek Common Array Manager's configuration. Is there a way to do it like backing up Brocade switch configuration? CAM is under Solaris 10.
Thank you in advance! (0 Replies)
Hi,
I have a question about Sun StorageTek Common Array Manager (CAM): What is the concept of 'host'? Is it the hostname of the server that has access to the managed array? If so, can I use its IP instead of its hostname?
I've found a 'host' under CAM called XYZ (See below). In our... (7 Replies)
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
]-> show HOST
/HOST
Targets:
bootmode
diag
domain
Properties:
autorestart = reset
autorunonerror = false
bootfailrecovery = poweroff
... (29 Replies)
Discussion started by: z_haseeb
29 Replies
LEARN ABOUT MINIX
fdisk
FDISK(8) System Manager's Manual FDISK(8)NAME
fdisk - partition a hard disk [IBM]
SYNOPSIS
fdisk [-hm] [-sn] [file]
OPTIONS -h Number of disk heads is m
-s Number of sectors per track is n
EXAMPLES
fdisk /dev/hd0 # Examine disk partitions
fdisk -h9 /dev/hd0 # Examine disk with 9 heads
DESCRIPTION
When fdisk starts up, it reads in the partition table and displays it. It then presents a menu to allow the user to modify partitions,
store the partition table on a file, or load it from a file. Partitions can be marked as MINIX, DOS or other, as well as active or not.
Using fdisk is self-explanatory. However, be aware that repartitioning a disk will cause information on it to be lost. Rebooting the sys-
tem immediately is mandatory after changing partition sizes and parameters. MINIX, XENIX, PC-IX, and MS-DOS all have different partition
numbering schemes. Thus when using multiple systems on the same disk, be careful.
Note that MINIX, unlike MS-DOS , cannot access the last sector in a partition with an odd number of sectors. The reason that odd partition
sizes do not cause a problem with MS-DOS is that MS-DOS allocates disk space in units of 512-byte sectors, whereas MINIX uses 1K blocks.
Fdisk has a variety of other features that can be seen by typing h.
Fdisk normally knows the geometry of the device by asking the driver. You can use the -h and -s options to override the numbers found.
SEE ALSO part(8).
FDISK(8)