Accessing a StorageTek 2530 Disk array from SUN, SPARC Enterprise T2000 Post: 302327664

Sponsored Content

Operating Systems Solaris Accessing a StorageTek 2530 Disk array from SUN, SPARC Enterprise T2000 Post 302327664 by DundeeDancer on Monday 22nd of June 2009 09:37:26 AM

06-22-2009

Registered User

Re-created the disk array volume with the Default file system option and then tried again to mount the file system without success.

Anyone any suggestions where I'm going wrong?

Thanks, DD.

Actions shown below :-

Code:

root@sesame # reboot -- -r


root@sesame # /usr/sbin/devfsadm
root@sesame #
root@sesame # format
Searching for disks...done

c4t0d0: configured with capacity of 1395.79GB


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@780/pci@0/pci@9/scsi@0/sd@0,0
       1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@780/pci@0/pci@9/scsi@0/sd@1,0
       2. c4t0d0 <SUN-LCSM100_S-0735-1.36TB>
          /pci@7c0/pci@0/pci@9/LSILogic,sas@0/sd@0,0
Specify disk (enter its number): 2
selecting c4t0d0
[disk unformatted]
Disk not labeled.  Label it now? y
Warning: error writing EFI.
Write label failed


FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
format> partition


PARTITION MENU:
        0      - change `0' partition
        1      - change `1' partition
        2      - change `2' partition
        3      - change `3' partition
        4      - change `4' partition
        5      - change `5' partition
        6      - change `6' partition
        select - select a predefined table
        modify - modify a predefined partition table
        name   - name the current table
        print  - display the current table
        label  - write partition map and label to the disk
        !<cmd> - execute <cmd>, then return
        quit
partition> print
Current partition table (original):
Total disk sectors available: 2927157214 + 16384 (reserved sectors)

Part      Tag    Flag     First Sector          Size          Last Sector
  0       root    wm                34       128.00MB           262177
  1       swap    wu            262178       128.00MB           524321
  2 unassigned    wu                 0            0                0
  3 unassigned    wm                 0            0                0
  4 unassigned    wm                 0            0                0
  5 unassigned    wm                 0            0                0
  6        usr    wm            524322         1.36TB           2927157213
  8   reserved    wm        2927157214         8.00MB           2927173597

partition> quit
format> quit

root@sesame # cd /
root@sesame # mount /dev/dsk/c4t0d0s6 /array01
mount: I/O error
mount: Cannot mount /dev/dsk/c4t0d0s6

DundeeDancer

View Public Profile for DundeeDancer

Find all posts by DundeeDancer

5 More Discussions You Might Find Interesting

1. Solaris

Sun Sparc T2000 + StorageTek 2540 - Help, I'm lost

I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it. I have one StorageTek 2540 array that I would like to connect to the T2000. For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be...

2. Solaris

Sun StorageTek Common Array Manager 6.0 works very slowly

Hi! I have Sun StorageTek 2540 FC array and CAM works very slowly - I can wait for software response even more than 2 minutes... I run this software on Windows machine with Firefox Web Browser but speed is terrible... How can I make it works at least a little bit faster?..

3. Filesystems, Disks and Memory

Backup Sun StorageTek Common Array Manager's configuration

In Sun manuals, I didn't find how to backup Sun StorageTek Common Array Manager's configuration. Is there a way to do it like backing up Brocade switch configuration? CAM is under Solaris 10. Thank you in advance!

4. Filesystems, Disks and Memory

SAN questions about Sun StorageTek array

Hi, I have a question about Sun StorageTek Common Array Manager (CAM): What is the concept of 'host'? Is it the hostname of the server that has access to the managed array? If so, can I use its IP instead of its hostname? I've found a 'host' under CAM called XYZ (See below). In our...

5. UNIX for Beginners Questions & Answers

Start /SYS on SUN SPARC does not start machine [SUN SPARC ENTERPRISE T-5240]

-> start /SYS Are you sure you want to start /SYS (y/n)? y Starting /SYS ]-> show HOST /HOST Targets: bootmode diag domain Properties: autorestart = reset autorunonerror = false bootfailrecovery = poweroff ...

LEARN ABOUT MINIX

repartit

REPARTITION(8)						      System Manager's Manual						    REPARTITION(8)

NAME

       repartition - load a partition table

SYNOPSIS

       repartition device [partition-file]

DESCRIPTION

       Repartition  uploads  a new partition table for the partitions of device.  The table is obtained from the first sector of partition-file if
       given, device otherwise.  Device may refer to the whole drive or a primary partition, depending on whether you want to upload  a  partition
       or a subpartition table.  The partitions will be truncated to fit within the enclosing device like the disk driver does, unless the numbers
       are coming from partition-file.

EXAMPLES

       repartition /dev/hd0
       repartition /dev/hd4 /etc/hd4.table

       Reload the partition table of drive 0 setting /dev/hd[1-4], and the subpartition table of /dev/hd4 setting /dev/hd4[a-d] using a file.  The
       latter may be useful if you need more than the 4 subpartitions a single Minix partition gives you.

DIAGNOSTICS

       The new table is printed on standard output.

FILES

       /dev/hd[0-9]

SEE ALSO

       hd(4), part(8).

BUGS

       The disk must be in use for the changes to stick.  The partition table of an idle disk will be reloaded on the first open.

AUTHOR

       Kees J. Bot (kjb@cs.vu.nl)

																    REPARTITION(8)