|
|
Sponsored Content
Operating Systems
Solaris
Accessing a StorageTek 2530 Disk array from SUN, SPARC Enterprise T2000
Post 302326913 by DundeeDancer on Friday 19th of June 2009 06:51:25 AM
06-19-2009
Accessing a StorageTek 2530 Disk array from SUN, SPARC Enterprise T2000
Hello,
Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array?
I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5).
The T2000 server appears to see the disk array but not able to write a disk label or mount a filesystem on it as the following commands show:-
root@sesame # format
Searching for disks...done
c4t0d0: configured with capacity of 1395.79GB
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c4t0d0 <SUN-LCSM100_S-0735-1.36TB>
/pci@7c0/pci@0/pci@9/LSILogic,sas@0/sd@0,0
Specify disk (enter its number): 2
selecting c4t0d0
[disk unformatted]
Disk not labeled. Label it now? y
Warning: error writing EFI.
Write label failed
partition> print
Current partition table (original):
Total disk sectors available: 2927157214 + 16384 (reserved sectors)
Part Tag Flag First Sector Size Last Sector
0 root wm 34 128.00MB 262177
1 swap wu 262178 128.00MB 524321
2 unassigned wu 0 0 0
3 unassigned wm 0 0 0
4 unassigned wm 0 0 0
5 unassigned wm 0 0 0
6 usr wm 524322 1.36TB 2927157213
8 reserved wm 2927157214 8.00MB 2927173597
partition>
root@sesame # mount /dev/dsk/c4t0d0s6 /array01
mount: I/O error
mount: Cannot mount /dev/dsk/c4t0d0s6
root@sesame #
To be honest I've never attached an array to a Unix server before so any pointers would be appreciated.
Thanks, DD
Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array?
I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5).
The T2000 server appears to see the disk array but not able to write a disk label or mount a filesystem on it as the following commands show:-
root@sesame # format
Searching for disks...done
c4t0d0: configured with capacity of 1395.79GB
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c4t0d0 <SUN-LCSM100_S-0735-1.36TB>
/pci@7c0/pci@0/pci@9/LSILogic,sas@0/sd@0,0
Specify disk (enter its number): 2
selecting c4t0d0
[disk unformatted]
Disk not labeled. Label it now? y
Warning: error writing EFI.
Write label failed
partition> print
Current partition table (original):
Total disk sectors available: 2927157214 + 16384 (reserved sectors)
Part Tag Flag First Sector Size Last Sector
0 root wm 34 128.00MB 262177
1 swap wu 262178 128.00MB 524321
2 unassigned wu 0 0 0
3 unassigned wm 0 0 0
4 unassigned wm 0 0 0
5 unassigned wm 0 0 0
6 usr wm 524322 1.36TB 2927157213
8 reserved wm 2927157214 8.00MB 2927173597
partition>
root@sesame # mount /dev/dsk/c4t0d0s6 /array01
mount: I/O error
mount: Cannot mount /dev/dsk/c4t0d0s6
root@sesame #
To be honest I've never attached an array to a Unix server before so any pointers would be appreciated.
Thanks, DD
|
|
5 More Discussions You Might Find Interesting
1. Solaris
I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it.
I have one StorageTek 2540 array that I would like to connect to the T2000.
For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)
Discussion started by: soliberus
4 Replies
2. Solaris
Hi!
I have Sun StorageTek 2540 FC array and CAM works very slowly - I can wait for software response even more than 2 minutes... I run this software on Windows machine with Firefox Web Browser but speed is terrible... How can I make it works at least a little bit faster?.. (2 Replies)
Discussion started by: Sapfeer
2 Replies
3. Filesystems, Disks and Memory
In Sun manuals, I didn't find how to backup Sun StorageTek Common Array Manager's configuration. Is there a way to do it like backing up Brocade switch configuration? CAM is under Solaris 10.
Thank you in advance! (0 Replies)
Discussion started by: aixlover
0 Replies
4. Filesystems, Disks and Memory
Hi,
I have a question about Sun StorageTek Common Array Manager (CAM): What is the concept of 'host'? Is it the hostname of the server that has access to the managed array? If so, can I use its IP instead of its hostname?
I've found a 'host' under CAM called XYZ (See below). In our... (7 Replies)
Discussion started by: aixlover
7 Replies
5. UNIX for Beginners Questions & Answers
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
]-> show HOST
/HOST
Targets:
bootmode
diag
domain
Properties:
autorestart = reset
autorunonerror = false
bootfailrecovery = poweroff
... (29 Replies)
Discussion started by: z_haseeb
29 Replies
LEARN ABOUT DEBIAN
seqdiag
SEQDIAG(1) General Commands Manual SEQDIAG(1) NAME
seqdiag - generate sequence-diagram image file from spec-text file. SYNOPSIS
seqdiag [options] file DESCRIPTION
This manual page documents briefly the seqdiag commands. seqdiag is generate sequence-diagram image file from spec-text file. OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below. For a complete description, see the Info files. --version show program's version number and exit -h, --help show this help message and exit -a, --antialias Pass diagram image to anti-alias filter -c FILE, --config=FILE read configurations from FILE -o FILE write diagram to FILE -f FONT, --font=FONT use FONT to draw diagram -T TYPE Output diagram as TYPE format SEE ALSO
The programs are documented fully by http://tk0miya.bitbucket.org/seqdiag/build/html/index.html AUTHOR
seqdiag was written by Takeshi Komiya <i.tkomiya@gmail.com> This manual page was written by Kouhei Maeda <mkouhei@palmtb.net>, for the Debian project (and may be used by others). May 21, 2011 SEQDIAG(1)