If you talking to your server via the ALOM card you need to type in:
Code:
console
to get through to where you can see the OK prompt (or the > prompt if the security-mode is set to something other than none).
If that does not help then try a serial connection to the first serial port, ttya (dare I suggest a Windows laptop running hyperterm or a Linux machine running mincom).
I have already tryed all this methods whithout result. There is nothing displayed when I connect to ttyb and the password for ALOM was losed. (Solaris is not installed and dasn't boot from dvd)
That's my other thread about that : https://www.unix.com/sun-solaris/1113...om-passwd.html
Any idea?
I think it is a hard and interesting situation
Got an curious issue.
I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on.
The patch modified mainly the linker libraries and commands.
... (2 Replies)
Hello,
I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Dear All,
I am facing a specfic problem with my New SunFire T2000.Recently we bought new sunfire T2000 sparc server.When i am trying to install solaris 10 through cdrom , I get error messgae
Error:Last Trap: Instaruction Access Exception
{0} ok boot cdrom
Boot device:... (6 Replies)
Hello,
I am seeing error messages in V440 (OS = solaris 8). I have copied here :
The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day..
I... (5 Replies)
Hi,
I was asked to connect a KVM screen to a Sun Fire V440 last night so I connected it up but no joy and nothing on the KVM screen. I was told that a reboot may fix the problem so connected to the ALOM and rebooted. On the plus side, the KVM screen now works but I lost the ALOM connection.
... (0 Replies)
Hi:
I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Dear Team,
I need some expert advice to my problem.
We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Hi,
I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is
Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken.
Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Hi,
I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either.
Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Hi,
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
LEARN ABOUT REDHAT
gftp
GFTP(1) General Commands Manual GFTP(1)NAME
gftp - a graphical ftp client
SYNOPSIS
gftp [options] [[proto://][ user : [pass] @] site [: port ][/ directory ]]
DESCRIPTION
gFTP is a multiprotocol file transfer program for X Windows and the console. It features support for the FTP, SSH, HTTP, and local file
system protocols, simultaneous downloads, resuming of interrupted file transfers, file transfer queues, downloading of entire directores,
ftp and http proxy support, remote directory caching, bookmarks menu, stop button and many more features
OPTIONS
You may enter a url on the command line that gFTP will automatically connect to when it starts up.
--help, -h
Display program usage, and quit
--version, -v
This will display the current version of gFTP, and exit
--download, -d
This tells gFTP to download the files and directories specified in the url passed on the command line.
user This is the username that you will login as to the remote site. If no username is supplied, the default is to login as anonymous.
pass This is the password you will use to login to the remotesite. If you do not enter a password, then gFTP will ask you for one when it
starts up. I do not recommend entering your password on the command prompt. Anyone that has access to your machine will be able to
see your username and password with the ps(1) command. If you are logging in as anonymous, you do not need to pass a password since
gFTP will automatically send your email address as your password.
site This is the remote site you want to connect to
port This is the port that the remote server is listening on. If you do not enter a port, it will default to using the ftp port listed in
the services(5) file. If the entry doesn't exist there, it will default to port 21.
directory
This is the default directory to change to once you are connected to the remote server.
FILES
~/.gftp/gftprc
Per user configuration file. This file is commented very well, so that is why there isn't a manpage for it. Most of the options in
here can be set inside gFTP itself.
BUGS
If you find any bugs in gFTP, please report them directly to the author.
AUTHOR
Brian Masney <masneyb@gftp.org> - http://www.gftp.org/
FEBURARY 2001 GFTP(1)
06-19-2009
