06-10-2009
Are you using a cross over cable ? I use a cross over cable, in my 9 pin com port b plug on my old laptop. I then plug into the ttya port on the sun server ( older models )
With the core cable being a cross over type, with the changing of different adaptors, I can pretty much connect on to anything.
SBK
8 More Discussions You Might Find Interesting
1. Solaris
I am needing to install solaris 2.6 on a Enterprise 420R with 4X450mHz. Documentation says you need Operating Enviroment Installation CD February 2000(704-7076-10). Does anyone know where I can get this? (4 Replies)
Discussion started by: jenyart
4 Replies
2. Solaris
I have a 420r server it boots up all of the network settings are correct, however the machines network connection is not working. Cant ping anything from it, cant ping it from another machine on the network.
If I ping 127.0.0.1 it says alive.
Is there a chance the network card has been... (2 Replies)
Discussion started by: alanj4
2 Replies
3. Solaris
Problem powering ON the SUN 450 E, we checked voltage and the power supply. Seems to be we have out of 3 LED's in the back 2 are glowing, when we turn the power button on the front from standby to ON.
Does anyone know how to troubleshoot this?.
I have looked through some troubleshooting... (2 Replies)
Discussion started by: calsum
2 Replies
4. UNIX for Dummies Questions & Answers
Hellow,
i bought a sun enterprise 420r. I would like to connect to the console for installation of a new operating system (solaris 10)
I made a connection from a usb --> com-port --> serial port of the server.
I configured my hyperterminal (9600 8n1) and when i connect to my server and... (2 Replies)
Discussion started by: chelle007
2 Replies
5. Solaris
Hi, I hope anyone could help me on this.
Here we have an Ultra Enterprise 4500 server. Since a few days ago, when starting the system, it showed a message about a faulty CPU fan. So, we manage to clean it up by removing it and then installing it back (as in the user manual).
After that, when... (2 Replies)
Discussion started by: lonchus
2 Replies
6. Solaris
Hello everyone...yesterday i've received a Sun Ultra E450 Server Unit and when I try to boot from everything it asks me for Firmware Password.:rolleyes:
The unit hasn't been used for 10 years...so no one doesn't yet remember the password.:D
Ok,I've searched on the Internet all day long finding... (5 Replies)
Discussion started by: Daiman
5 Replies
7. Solaris
Hi,
I am using sun enterprise 420R server. Problem is on the monitor i am not able to see anything. I tried Serial connection, on terminal(using serial) i could see that POST(power on start tests) tests are being done, after that "timeout waiting for arp rarp packet" message keep displaying... (11 Replies)
Discussion started by: kkittu009
11 Replies
8. Hardware
I got a coffee table(enterprise 3000) for free from a friend a couple of months ago, and I'm trying to convince it to boot.
List of cards
1x Clock Board
1x I/O board
2x CPU Boards
1x SCSI board? It has 2 SCSI headers on it anyway
In addition, its HDD rack is almost full of 18GB drives.... (3 Replies)
Discussion started by: dpeterson309
3 Replies
LEARN ABOUT DEBIAN
liebert
LIEBERT(8) NUT Manual LIEBERT(8)
NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)