Why do you want to manipulate /etc/fstab? As soon as it's automounted:
The issue here is that I am going to migrate from a SUN Solaris based server to a OS X based server.
On the Solaris server, the external raid system is mounted on /raid.
It is important for me to maintain the paths on the file system.
That is why I would like to get an equal mount point on OS X as I currently have on the Solaris server.
One thing is to manually change the mount point for a disk, but I also need it to stay that way after a reboot as well.
Anyone,
I am trying to mount a second hard drive on a sunfire V120 w/solaris 5.8. I took this hard drive from another system because I deleted some files off that system and I want to mount it to another system so I can copy the file back onto the system. I really have no other means of... (2 Replies)
Good morning,
I have a problem replacing a disk with raid-5 volumes.
An hardware error was occurred from a disk c9t3 so all slices were in maintenace. Every slice is part of a raid-5 volume. Any replica is present.
Following Volume manager manual for replacing a disk, I have:
- phisically... (0 Replies)
hi
i am wondering if it is possible to use one nfs mount point for several logical volumes.
i have a top level directory /imaging with data1 - data50 below it. each dataX directory is a logical volume configured through LVM. if i mount them separately on the client (i.e. 50 lines in fstab... (1 Reply)
Hey there, sorry if this is a bit too much of a noob question, trying to get to grips with a simple bash script - but i have done ZERO bash scripting.
basically having worked out how to mount and unmount disks using:
disktool -m *device* & disktool -e *device*
- and looking at the result of... (2 Replies)
I am working with a Sun StoredgeTek 6540 disk array connected to two Sun 490 servers. After taking one of the 490 nodes on the cluster down to single user mode I proceeded to install the latest cluster patch from Oracle. After the patch was completed the system rebooted, failed to rejoin the... (2 Replies)
Hi all,
i must add a new disk on a LPAR.
I've done all the HMC and VIOS Procedure to create a virtual host with disk and assign it to lpar.
I don't remember how i must do on the lpar to see this disk. (i use lvm not veritas).
Thanks in advance and sorry for my english.
Bye
Mario (2 Replies)
So. My system have 2 solaris10 machine but system disk of machine 1 data crash.I bring the system disk of machine 1 install on machine2 for get data from disk machine1 but I can't mount disk. because msg is
bash-3.00# mount /dev/dsk/c1t3d0s0 /mnt
mount: /dev/dsk/c1t3d0s0 is not this fstype... (3 Replies)
Hi folks,
because of disk space problem my root is almost full..The root is mounted on rpool and i want to move /app on a new disk, is that possible without compromising any link?How can i do that?
I use solaris 10
Thank you in advance,
Matt
---------- Post updated at 04:36 PM... (8 Replies)
Discussion started by: mattpunk
8 Replies
LEARN ABOUT ULTRIX
umount
mount(8) System Manager's Manual mount(8)Name
mount, umount - mount or unmount file systems
Syntax
/etc/mount [ options ] [ device ] [ directory ]
/etc/umount [ options ] [ device ] [ directory ]
Description
This is a general description of the command. Additional descriptions are provided to define the syntax and options for the NFS and UFS
file systems.
Each invocation of the command announces to the system that a file system is present on the device device. The file system may be local or
remote. File directory must exist as a directory file. It becomes the name of the newly mounted file system root.
If invoked without arguments, prints the list of mounted file systems.
Physically write-protected disks and magnetic tape file systems must be mounted read-only or an error will occur at mount time.
General users can only mount file systems with certain restrictions. For example, the user, other than the superuser, performing the mount
must own the directory directory. Furthermore, no users other than the superuser can execute or programs on the mounted file systems. In
addition, users other than the superuser cannot access block or special character devices such as on the mounted file systems.
The command announces to the system that the removable file system previously mounted on the specified directory is to be removed. Only
the person who mounted a particular file system or the superuser can unmount the file system again.
Options-a Reads the file and mounts, or unmounts, all file systems listed there.
-f Fast unmount. The option has no meaning for local file systems and directories. However, for remote file system types (such
as NFS), the option causes the client to unmount the remotely mounted file systems and directories without notifying the
server. This can avoid the delay of waiting for acknowledgment from a server that is down.
-o options Specifies a string that is passed to the kernel and used by the specific file system's mount routine in the kernel. For spe-
cific options, refer to the file system-specific description, such as
-r Indicates that the file system is to be mounted read only. To share a disk, each host must mount the file system with the -r
option.
-t type Specifies the type of file system is being mounted. When used with the option, the option mounts all file systems of the given
type found in the file. For specific file system types, refer to the file system-specific description, such as
-v Tells what did or did not happen. (Verbose flag)
The options for are:
-a Unmounts all mounted file systems. It may be necessary to execute twice to accomplish unmounting of all mounted file systems.
-v Tells what did or did not happen. (Verbose flag)
Restrictions
Mounting corrupted file systems will crash the system.
Files
File systems information table
See Alsogetmnt(2), mount(2), fstab(5), fsck(8), mount(8nfs), mount(8ufs)mount(8)