Anyone,
I am trying to mount a second hard drive on a sunfire V120 w/solaris 5.8. I took this hard drive from another system because I deleted some files off that system and I want to mount it to another system so I can copy the file back onto the system. I really have no other means of... (2 Replies)
Good morning,
I have a problem replacing a disk with raid-5 volumes.
An hardware error was occurred from a disk c9t3 so all slices were in maintenace. Every slice is part of a raid-5 volume. Any replica is present.
Following Volume manager manual for replacing a disk, I have:
- phisically... (0 Replies)
hi
i am wondering if it is possible to use one nfs mount point for several logical volumes.
i have a top level directory /imaging with data1 - data50 below it. each dataX directory is a logical volume configured through LVM. if i mount them separately on the client (i.e. 50 lines in fstab... (1 Reply)
Hey there, sorry if this is a bit too much of a noob question, trying to get to grips with a simple bash script - but i have done ZERO bash scripting.
basically having worked out how to mount and unmount disks using:
disktool -m *device* & disktool -e *device*
- and looking at the result of... (2 Replies)
I am working with a Sun StoredgeTek 6540 disk array connected to two Sun 490 servers. After taking one of the 490 nodes on the cluster down to single user mode I proceeded to install the latest cluster patch from Oracle. After the patch was completed the system rebooted, failed to rejoin the... (2 Replies)
Hi all,
i must add a new disk on a LPAR.
I've done all the HMC and VIOS Procedure to create a virtual host with disk and assign it to lpar.
I don't remember how i must do on the lpar to see this disk. (i use lvm not veritas).
Thanks in advance and sorry for my english.
Bye
Mario (2 Replies)
So. My system have 2 solaris10 machine but system disk of machine 1 data crash.I bring the system disk of machine 1 install on machine2 for get data from disk machine1 but I can't mount disk. because msg is
bash-3.00# mount /dev/dsk/c1t3d0s0 /mnt
mount: /dev/dsk/c1t3d0s0 is not this fstype... (3 Replies)
Hi folks,
because of disk space problem my root is almost full..The root is mounted on rpool and i want to move /app on a new disk, is that possible without compromising any link?How can i do that?
I use solaris 10
Thank you in advance,
Matt
---------- Post updated at 04:36 PM... (8 Replies)
Discussion started by: mattpunk
8 Replies
LEARN ABOUT MINIX
mount
MOUNT(2) System Calls Manual MOUNT(2)NAME
mount, umount - mount or umount a file system
SYNOPSIS
#include <unistd.h>
#include <sys/mount.h>
int mount(char *special, char *name, int flag)
int umount(char *name)
DESCRIPTION
Mount() tells the system that the file system special is to be mounted on the file name, effectively overlaying name with the file tree on
special. Name may of any type, except that if the root of special is a directory, then name must also be a directory. Special must be a
block special file, except for loopback mounts. For loopback mounts a normal file or directory is used for special, which must be seen as
the root of a virtual device. Flag is 0 for a read-write mount, 1 for read-only.
Umount() removes the connection between a device and a mount point, name may refer to either of them. If more than one device is mounted
on the same mount point then unmounting at the mount point removes the last mounted device, unmounting a device removes precisely that
device. The unmount will only succeed if none of the files on the device are in use.
Both calls may only be executed by the super-user.
SEE ALSO mount(1), umount(1).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
MOUNT(2)