Virtual Ethernet VIO HMC LPARs Post: 302321774

9 More Discussions You Might Find Interesting

1. AIX

Help urgent : vio server - add extral disk on virtual lpar

Hi, I define 2 new LV on the vio server and run a cfgmgr on the partition and see my 2 new hdisk (hdisk6 and hdisk7). I extend my vg vg000 (on the partition) and add the 2 hdisks. I had a filesystem on the vg000 and when I added the disk I would like to increase the filesystem. But I cannot do a...

2. UNIX for Advanced & Expert Users

Virtual Ethernet

I understand that one should setup virtual ethernet adapters in the lpars which is the best way for various lpars to communicate with each other - Does anyone have info on this or can point me to a doc that explains how to set this up?

3. AIX

Virtual Ethernet with VIO

We're using VIO (not an HMC) to manage our LPAR's We have 3 physical adapters and 4 LPARs. Through the VIO interface we assigned 2 virtual interfaces but require a 3rd interface assigned to these LPARs. I am experiencing issues understanding exactly how to create another virtual adapter, either...

4. AIX

CDROM Issue on LPAR HMC VIO

Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR. How can I do it without rebooting the LPARS. POWER6 with HMC LPARS = AIX 6.1 Any info developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ... But...

5. AIX

Inherited VIO server an LPARs

Lucky me, someone has installed a server and got it running with the best intentions, but leaving me a headache. :wall: We have a simple p520 with 4 disks. 2x145Gb & 2x300Gb. The smaller disk pair have been built into a VIO mirrored rootvg, and quite right too. The other two disks form a...

6. AIX

Setting up an Integrated Virtual Ethernet adapter

All I am trying allocate an IVE to an LPAR (not a VIO) running AIX 7.1. I am getting the error: HSCL068A Explanation Logical port can not be assigned to Logical Partition because this Logical Partition is not the promiscuous LPAR for the physical port. Has anyone encountered this...

7. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter...

8. AIX

Connecting system to Virtual HMC

Hi, I just successfully build a Virtual Machine in virtual box with Perfectly running HMC v7. I have a IBM eServer pSeries Model 630 Model 6C4 (Power 4) i.e. 7024-6C4. I am not able to have it connect to the HMC console on the Virtual Box. Can anyone help me on how to connect it to the...

9. AIX

Need to replace a broken PV in a VIO VG used for client LPARs (and it won't release the old one)

I have a broken PV in a VIO VG that's used to support client LPARs using LVs. On the client LPAR, I reduced all PVs from the relevant client VG and thus deleted it. I.e. there is no client LPAR using the VIO VG. Yet when I try to reducevg the VIO VG, it complains that the LV hosted on the PV is...

LEARN ABOUT DEBIAN

gvpectrl

GVPECTRL(8)						   GNU Virtual Private Ethernet 					       GVPECTRL(8)

NAME

       gvpectrl - GNU Virtual Private Ethernet Control Program

SYNOPSIS

       gvpectrl [-ckgs] [--config=DIR] [--generate-keys] [--help] [--kill[=SIGNAL]] [--show-config] [--version]

DESCRIPTION

       This is the control program for the gvpe, the virtual private ethernet daemon.

OPTIONS

       -c, --config=DIR
	   Read configuration options from DIR.

       -g, --generate-keys
	   Generate public/private RSA key-pair and exit.

       -q, --quiet
	   Suppresses messages the author finds nonessential for scripting purposes.

       --help
	   Display short list of options.

       --kill[=SIGNAL]
	   Attempt to kill a running gvpectrl (optionally with the specified SIGNAL instead of SIGTERM) and exit.

       --show-config
	   Show a summary of the configuration, and how gvpe interprets it. Can also be very useful when designing firewall scripts.

       --version
	   Output version information and exit.

BUGS

       If you find any bugs, report them to gvpe@schmorp.de.

SEE ALSO

       gvpe(5), gvpe.conf(5), gvpe(8).

       GVPE comes with ABSOLUTELY NO WARRANTY.	This is free software, and you are welcome to redistribute it under certain conditions; see the
       file COPYING for details.

AUTHOR

       Marc Lehmann <gvpe@schmorp.de>.

2.2								    2008-09-01							       GVPECTRL(8)