05-31-2009
Is the zoning done appropriately?
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight.... (1 Reply)
Discussion started by: GoneCrazy
1 Replies
2. UNIX for Dummies Questions & Answers
hi all,
i've got an old PC with unix (SCO System V/386 rel. 3.2) on it.
Pentium I; 128mb; ISA 2-port RS232 serial adapter card for an oki dot-matrix printer. (no usb, no CD)
i've been running an old cobol program to do some invoicing and print reports.
some time back i changed the... (0 Replies)
Discussion started by: frankpky
0 Replies
3. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
4. Solaris
Hi All,
I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices..
bash-2.05# luxadm -e port
Found path to 0 HBA ports
bash-2.05# luxadm probe
No Network Array enclosures found in /dev/es... (7 Replies)
Discussion started by: ilan
7 Replies
5. AIX
Hello,
When I try to upgrade AIX from 5.1 to 5.3 I get this error message
20EE0008 : No adapters found Adapter, Riser, System Bd.
Anyone know anything about it ? (1 Reply)
Discussion started by: filosophizer
1 Replies
6. Solaris
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Discussion started by: girish.batra
6 Replies
7. Solaris
hi i have a sun machine which has one hba 2ports;
out of which one port says it is not connected
# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
but both... (9 Replies)
Discussion started by: anwesh
9 Replies
8. Solaris
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
9. AIX
All
I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
$ lsnports
name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies
10. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT DEBIAN
smp_zone_activate
SMP_ZONE_ACTIVATE(8) SMP_UTILS SMP_ZONE_ACTIVATE(8)
NAME
smp_zone_activate - invoke ZONE ACTIVATE SMP function
SYNOPSIS
smp_zone_activate [--expected=EX] [--help] [--hex] [--interface=PARAMS] [--raw] [--sa=SAS_ADDR] [--verbose] [--version] SMP_DEVICE[,N]
DESCRIPTION
Sends a SAS Management Protocol (SMP) ZONE ACTIVATE function request to a SMP target. The SMP target is identified by the SMP_DEVICE and
the --sa=SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced from the SMP_DEVICE. The mpt interface uses SMP_DEVICE to iden-
tify a HBA (an SMP initiator) and needs the additional ,N to differentiate between HBAs if there are multiple present.
This function, if successful, will cause various zoning related shadow values (e.g. zone permission table and zone phy information) to be
copied to the corresponding current values. If the saving to "saved" values option has been selected then the various zoning related shadow
values will also be copied to the corresponding saved values.
OPTIONS
Mandatory arguments to long options are mandatory for short options as well.
-E, --expected=EX
set the 'expected expander change count' field in the SMP request. The value EX is from 0 to 65535 inclusive with 0 being the
default value. When EX is greater than zero then if the value doesn't match the expander change count of the SMP target (i.e. the
expander) when the request arrives then the target ignores the request and sets a function result of "invalid expander change count"
in the response.
-h, --help
output the usage message then exit.
-H, --hex
output the response (less the CRC field) in hexadecimal.
-I, --interface=PARAMS
interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See
the smp_utils man page for more information.
-r, --raw
send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr.
-s, --sa=SAS_ADDR
specifies the SAS address of the SMP target device. The mpt interface needs this option and it will typically be an expander's SAS
address. The SAS_ADDR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix
it with '0x' or put a trailing 'h' on it.
-v, --verbose
increase the verbosity of the output. Can be used multiple times.
-V, --version
print the version string and then exit.
CONFORMING TO
The SMP ZONE ACTIVATE function was introduced in SAS-2 .
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2011 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
SEE ALSO
smp_utils, smp_zone_lock, smp_zone_unlock, smp_ena_dis_zoning(smp_utils)
smp_utils-0.96 June 2011 SMP_ZONE_ACTIVATE(8)