05-28-2009
iam connectin thru telnet
iam connectin thru telnet network login unreachable what is the problem can u suggest
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight.... (1 Reply)
Discussion started by: GoneCrazy
1 Replies
2. UNIX for Dummies Questions & Answers
hi all,
i've got an old PC with unix (SCO System V/386 rel. 3.2) on it.
Pentium I; 128mb; ISA 2-port RS232 serial adapter card for an oki dot-matrix printer. (no usb, no CD)
i've been running an old cobol program to do some invoicing and print reports.
some time back i changed the... (0 Replies)
Discussion started by: frankpky
0 Replies
3. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
4. Solaris
Hi All,
I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices..
bash-2.05# luxadm -e port
Found path to 0 HBA ports
bash-2.05# luxadm probe
No Network Array enclosures found in /dev/es... (7 Replies)
Discussion started by: ilan
7 Replies
5. AIX
Hello,
When I try to upgrade AIX from 5.1 to 5.3 I get this error message
20EE0008 : No adapters found Adapter, Riser, System Bd.
Anyone know anything about it ? (1 Reply)
Discussion started by: filosophizer
1 Replies
6. Solaris
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Discussion started by: girish.batra
6 Replies
7. Solaris
hi i have a sun machine which has one hba 2ports;
out of which one port says it is not connected
# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
but both... (9 Replies)
Discussion started by: anwesh
9 Replies
8. Solaris
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
9. AIX
All
I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
$ lsnports
name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies
10. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT DEBIAN
rxtelnet
RXTELNET(1) BSD General Commands Manual RXTELNET(1)
NAME
rxtelnet -- start a telnet and forward X-connections.
SYNOPSIS
rxtelnet [-l username] [-k] [-t telnet_args] [-x xterm_args] [-K kx_args] [-w term_emulator] [-b telnet_program] [-n] [-v] host [port]
DESCRIPTION
The rxtelnet program starts an xterm window with a telnet to host host. From this window you will also be able to run X clients that will be
able to connect securely to your X server. If port is given, that port will be used instead of the default.
If setting up the X forwarding failes, rxtelnet will still telnet in to the remote host, but without X forwarding.
The supported options are:
-l Log in on the remote host as user username.
-k Disables keep-alives.
-t Send telnet_args as arguments to telnet.
-x Send xterm_args as arguments to xterm.
-X Send kx_args as arguments to kx.
-w Use term_emulator instead of xterm.
-b Use telnet_program instead of telnet.
-n Do not start any terminal emulator.
-v Be verbose.
EXAMPLE
To login from host foo (where your display is) to host bar, you might do the following.
1. On foo: rxtelnet bar
2. You will get a new window with a telnet to bar. In this window you will be able to start X clients.
SEE ALSO
kx(1), rxterm(1), telnet(1), tenletxr(1), kxd(8)
KTH_KRB March 7, 2004 KTH_KRB