How to find the duplex speed on Windows Post: 302317712

10 More Discussions You Might Find Interesting

1. HP-UX

How to find CPU Speed of HP UX

Need to find the CPU speed of HP UX for a non root login. echo "itick_per_usec/D" | adb /stand/vmunix /dev/mem | tail -1 will give the following for non root users ERROR: cannot open `/dev/mem', errno = 13, Permission denied

2. Linux

How to find CPU Speed of zLinux

Need to find CPU Speed of zLinux. The commands like cat /proc/cpuinfo and /usr/bin/cpufreq-info does not gave me the expected results. /usr/bin/cpufreq-info prints the .... analyzing CPU 0: no or unknown cpufreq driver is active on this CPU analyzing CPU 1: no or unknown cpufreq...

3. IP Networking

NIC speed 100M/full duplex problem

I have a TOSHIBA AS7000 B150 Sun Box I wanted to run it with 100M/full duplex I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot. set eri:eri_adv_100fdx_cap=1 set eri:eri_adv_100hdx_cap=0 set eri:eri_adv_autoneg_cap=0 But when I...

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Hi there We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is. As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only...

5. Solaris

Solaris 10 Speed and Duplex Settings: bge

Evening, I am attempting to change the speed and duplex settings on a single interface on a bge card on an m3000 SPARC server. Currently the settings are as follows: bge0 link: up speed: 1000 Mbps duplex: full bge1 link: up speed: 100 Mbps ...

6. Solaris

How to find half duplex or full duplex

Hi, How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct? Also let me know how to change from half to full duplex.

7. AIX

How to change Speed Duplex

How to change Speed Duplex ! How to change Speed Duplex by command chdev -P -l ent1 -a media_speed=1000_Full_Duplex How to change Speed Duplex by Smitty . smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ...

8. UNIX for Dummies Questions & Answers

Find the file which is growing at high speed

Hi, A log file which is growing at high speed, don't know the name of it. How to find the respective file? Many thanks.

9. AIX

I/O speed to CIFS mounted Windows Share

I have an AIX box that mounts a Windows share across subnets. When I try to copy a 100 MB file to it, it copies around 2 MB/s. If I copy to another Windows share on the same subnet it copies around 12 MB/s. All I have is gigabit networks so I would expect it to go well over 12 MB/s, which is the...

10. AIX

Connected and Running with half duplex speed

VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good. Other ethernet adapter in the VIO server are connected and running in Full duplex speed. Please help me find why this shared...

LEARN ABOUT FREEBSD

txp

TXP(4)							   BSD Kernel Interfaces Manual 						    TXP(4)

NAME

     txp -- 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface

SYNOPSIS

     To compile this driver into the kernel, place the following line in your kernel configuration file:

	   device txp

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   if_txp_load="YES"

DESCRIPTION

     The txp interface provides access to the 10Mb/s and 100Mb/s Ethernet networks via the 3Com Typhoon/Sidewinder chipset.

     Basic Ethernet functions are provided as well as support for vlan(4) tag removal and insertion assistance, receive ip(4), tcp(4), and udp(4)
     checksum offloading, and transmit ip(4) checksum offloading.  There is currently no support for transmit tcp(4) or udp(4) checksum offload-
     ing, tcp(4) segmentation, nor ipsec(4) acceleration.

     When a txp interface is brought up, by default, it will attempt to auto-negotiate the link speed and duplex mode.	The speeds, in order of
     attempt, are: 100Mb/s Full Duplex, 100Mb/s Half Duplex, 10 Mb/s Full Duplex, and 10 Mb/s Half Duplex.

     The txp supports several media types, which are selected via the ifconfig(8) command.  The supported media types are:

     media autoselect
	     Attempt to autoselect the media type (default)

     media 100baseTX mediaopt full-duplex
	     Use 100baseTX, full duplex

     media 100baseTX [mediaopt half-duplex]
	     Use 100baseTX, half duplex

     media 10baseT mediaopt full-duplex
	     Use 10baseT, full duplex

     media 10baseT [mediaopt half-duplex]
	     Use 10baseT, half duplex

HARDWARE

     The txp driver supports the following cards:

	   o   3Com 3CR990-TX-95
	   o   3Com 3CR990-TX-97
	   o   3Com 3cR990B-TXM
	   o   3Com 3CR990SVR95
	   o   3Com 3CR990SVR97
	   o   3Com 3cR990B-SRV

SEE ALSO

     altq(4), arp(4), inet(4), intro(4), ip(4), miibus(4), tcp(4), udp(4), vlan(4), ifconfig(8)

HISTORY

     The txp driver first appeared in OpenBSD 2.9.

BSD
								 January 26, 2012							       BSD