Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: SAN Storage to solaris 10 server
Operating Systems Solaris SAN Storage to solaris 10 server Post 302316739 by manni2 on Saturday 16th of May 2009 07:31:09 AM
Old 05-16-2009
# luxadm -e port
/devices/pci@0/pci@0/pci@8/pci@0/pci@2/SUNW,qlc@0/fp@0,0:devctl NOT CONNECTED
/devices/pci@0/pci@0/pci@8/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0:devctl CONNECTED
/devices/pci@0/pci@0/pci@8/pci@0/pci@8/SUNW,qlc@0/fp@0,0:devctl CONNECTED
/devices/pci@0/pci@0/pci@8/pci@0/pci@8/SUNW,qlc@0,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@0/pci@0/pci@9/SUNW,qlc@0/fp@0,0:devctl NOT CONNECTED
/devices/pci@0/pci@0/pci@9/SUNW,qlc@0,1/fp@0,0:devctl NOT CONNECTED
luxadm probe
No Network Array enclosures found in /dev/es

Found Fibre Channel device(s):
Node WWN:50060160b9a0399b Device Type:Disk device
Logical Path:/dev/rdsk/c3t5006016039A0399Bd0s2
Logical Path:/dev/rdsk/c4t5006016939A0399Bd0s2

you see luxadm -e port shows only 2 cards activ but it should be 3

even san connection cable is on 1 already acti card and 1 not "connected card"

luxadm probe shows path to current attached storage

thanks
 

9 More Discussions You Might Find Interesting

1. Solaris

Storage Migration on Solaris server

Hi All, I need your help urgently. Below I have given the brief description of the Architecture and the Problem. The brief details of the architecture: We have 5 Containers(Non-Global Zones) running on one T5220 Box. The Global Zone is running Solaris 10. The Non-global Zones are... (6 Replies)
Discussion started by: kamaldeep1986
6 Replies

2. Red Hat

how do we check SAN storage?

Hello, I am using LINUX OS. I want to check what is the SAN storage size. How do i check this in server? Any help is really appreciated.. (3 Replies)
Discussion started by: govindts
3 Replies

3. UNIX for Dummies Questions & Answers

Storage from SAN

hi guys I installed Centos 5.5 (local disk). I am using 2 HBAs Now I mapped 5 LUNs from a Storage. I will be using LVM just to test I assigned a LUN I've read I have to use multipath to avoid my Centos see the LUN twice I enabled mdmpd and multipathd... something else I should do? ... (8 Replies)
Discussion started by: kopper
8 Replies

4. Filesystems, Disks and Memory

Original SAN to a New Solaris Server: Corrupt Label

I've seen several posts that are similar to what I'm trying to do but no dice. I have a server (SunFire V215) that went belly up. I've set up a new one. I'm getting a corrupt label: wrong magic number error. Everything I'm seeing says label the drives, but if I do I'm afraid I'll lose the data... (0 Replies)
Discussion started by: tnelson
0 Replies

5. AIX

New to San Storage

Can anyone recommend a good book on san storage basics and how it communicates with an AIX server? (1 Reply)
Discussion started by: NycUnxer
1 Replies

6. Solaris

Solaris 10, adding new LUN from SAN storage

Hello to all, Actually, currently on my Solaris box, I've a LUN (5TB space) from a EMC storage which is working fine, and a partition with ZFS filesystem is created for that LUN. as further you'll see in the logs, the "c4t6006016053802E00E6A9196B6506E211d0s2" is the current configured LUN in the... (4 Replies)
Discussion started by: Anti_Evil
4 Replies

7. Homework & Coursework Questions

How to mount a 79TB SAN storage to another server?

Hi Team, How do i mount or connect the SAN storage to a specific folder. I have tried to mount it but each time i can only mount 900GB of the storage to the folder: ipmi1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-root_vol ... (0 Replies)
Discussion started by: ElVista
0 Replies

8. Solaris

Solaris SAN Storage Multipath and Messages Check Script

Hi everybody, i am working on the new script , its job discover the Storage Env ( especially MultiPATH ) and FC cards for solaris 11 sparc systems for now.. script is seem working ( but may contain any mistakes or bug ) on the oracle Qlogic fc cards on Emc_VMAx systems and Solaris 11 Sparc_64... (0 Replies)
Discussion started by: ygemici
0 Replies

9. Red Hat

Advice on allocating SAN storage to a virtual database server on VMware

I am relatively new to Linux and we are getting ready to convert our current oracle database servers from the AIX platform to RHEL7 servers on VMWare. I would appreciate any advice on how best to allocate storage to these machines. I plan on using LVM to maintain the disks/filesystems but am... (9 Replies)
Discussion started by: dkmartin
9 Replies

LEARN ABOUT REDHAT

sysdef

sysdef(1M)						  System Administration Commands						sysdef(1M)

NAME

       sysdef - output system definition

SYNOPSIS

       /usr/sbin/sysdef [-i] [-n namelist]

       /usr/sbin/sysdef [-h] [-d] [-i] [-D]

DESCRIPTION

       The  sysdef utility outputs the current system definition in tabular form. It lists all hardware devices, as well as pseudo devices, system
       devices, loadable modules, and the values of selected kernel tunable parameters.

       It generates the output by analyzing the named bootable operating system file (namelist) and extracting the configuration information  from
       it.

       The default system namelist is /dev/kmem.

OPTIONS

       -i	       Prints  the  configuration information from /dev/kmem. This is the default and only needs to be specified if the configura-
		       tion information from both /dev/kmem and the system file specified with the "-n namelist" option is needed.

       -nnamelist      Specifies a namelist other than the default (/dev/kmem). The namelist specified must be a valid bootable operating system.

       -h	       Prints the identifier of the current host in hexadecimal. This numeric value is unique across all Sun hosts.

       -d	       The output includes the configuration of system peripherals formatted as a device tree.

       -D	       For each system peripheral in the device tree, display the name of the device driver used to manage the peripheral.

EXAMPLES

       Example 1: Sample output format

       The following example displays the format of the sysdef -d output:

       example% sysdef -d
       Node 'SUNW,Ultra-5_10', unit #-1
	   Node 'packages', unit #-1 (no driver)
	       Node 'terminal-emulator', unit #-1 (no driver)
	       Node 'deblocker', unit #-1 (no driver)
	       Node 'obp-tftp', unit #-1 (no driver)
	       Node 'disk-label', unit #-1 (no driver)
	       Node 'SUNW,builtin-drivers', unit #-1 (no driver)
	       Node 'sun-keyboard', unit #-1 (no driver)
	       Node 'ufs-file-system', unit #-1 (no driver)
	   Node 'chosen', unit #-1 (no driver)
	   Node 'openprom', unit #-1 (no driver)
	       Node 'client-services', unit #-1 (no driver)
	   Node 'options', unit #0
	   Node 'aliases', unit #-1 (no driver)
	   Node 'memory', unit #-1 (no driver)
	   Node 'virtual-memory', unit #-1 (no driver)
	   Node 'pci', unit #0
	       Node 'pci', unit #0
		   Node 'ebus', unit #0
		       Node 'auxio', unit #-1 (no driver)
		       Node 'power', unit #0
		       Node 'SUNW,pll', unit #-1 (no driver)
		       Node 'se', unit #0 (no driver)
		       Node 'su', unit #0
		       Node 'su', unit #1
		       Node 'ecpp', unit #-1 (no driver)
		       Node 'fdthree', unit #0
		       Node 'eeprom', unit #-1 (no driver)
		       Node 'flashprom', unit #-1 (no driver)
		       Node 'SUNW,CS4231', unit #0 (no driver)
		   Node 'network', unit #0
		   Node 'SUNW,m64B', unit #0
		   Node 'ide', unit #0
		       Node 'disk', unit #-1 (no driver)
		       Node 'cdrom', unit #-1 (no driver)
		       Node 'sd', unit #1
		       Node 'dad', unit #1
	       Node 'pci', unit #-1 (no driver)
	   Node 'SUNW,UltraSPARC-IIi', unit #-1 (no driver)
	   Node 'pseudo', unit #0
       [output truncated]

FILES

       /dev/kmem       default operating system image

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       hostid(1), prtconf(1M), nlist(3ELF), attributes(5)

SunOS 5.10							    4 Oct 2004								sysdef(1M)
All times are GMT -4. The time now is 02:41 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy