05-16-2009
Ok, in sysctl.conf, you need to set net.ipv4.ip_forward to 1 (also on the command line).
On PC1, you set the default gateway to 81.180.75.70. On PC2 you set the default gatway to 192.168.1.1. That should be it.
10 More Discussions You Might Find Interesting
1. IP Networking
I have SCO Unix. I have 2 routers. as it is now, when someone telnets to UNIX and goes through router #1 everything is fine. The users who go through router #2 can not connect at all. I talked to CISCO and they said I need to set up a second Gateway on UNIX. They said what is happening is that... (1 Reply)
Discussion started by: john fli
1 Replies
2. IP Networking
ok i configured my gateway and IP address(es) using ifconfig and route.. but how can i bind unique IPs to users ? (im using FreeBSD 4.2 RELEASE #3) (9 Replies)
Discussion started by: DevilGREEN
9 Replies
3. UNIX for Dummies Questions & Answers
Can anyone help with the following;
I am working on a unix server (Apple OS X Server). We have two network cards in the server. Both cards are on different subnets i.e en1 is on 192.168.10.10/24 and the built in ethernet is on 10.10.150.10/24. From a computer plugged into en1 (and set to ip... (5 Replies)
Discussion started by: mrthrt
5 Replies
4. UNIX for Dummies Questions & Answers
I'm brand new to this forum AND Unix. For obvious reasons. I don't know much at all. I'm 14 and i just got my first UNIX SPARCstation5 SUN computer. Something like that. i set up Solaris 9.1(With the help from my dad), now that i've gotten pertty much everything settled, i would like to route my... (8 Replies)
Discussion started by: SoulCheese
8 Replies
5. IP Networking
hi
is there any system call by which ip routing table can be accessed. (1 Reply)
Discussion started by: vinodkumar
1 Replies
6. UNIX for Advanced & Expert Users
Hi,
in which file and how shuold be decalred a gateway and its IP adresse ?
Where and how add a gateway ?
Many thanks before. (4 Replies)
Discussion started by: big123456
4 Replies
7. Linux
Hello Friends
I have two network cards
eth0 192.168.100.1
eth1 10.0.0.1
There NIC connect with diff. LAN
I want to make my Linux machine as a Router, Please tell me
using
IPTABLES command
ROUTE command
:) (2 Replies)
Discussion started by: jaibw
2 Replies
8. IP Networking
I am using RedHat Linux 9, In this box their are two lan intefaces.
eth0 ====> LAN
192.168.100.100
255.255.255.0
eth1 ====> Internet
Static IP
255.255.255.0
59.144.168.226 (Gateway)
I want to define a gateway 59.144.168.226 for my LAN... (2 Replies)
Discussion started by: jaibw
2 Replies
9. UNIX for Dummies Questions & Answers
Hello everybody,
I need help:
I have to make routing between two different LAN.
I have the IP for first network 81.180.75.70 and the mask is 255.255.255.192
and for the second network: 192.168.1.1 and the mask 255.255.255.0
So, each network has only one PC with windows (this is for test),... (0 Replies)
Discussion started by: meorfi
0 Replies
10. UNIX for Dummies Questions & Answers
I'm trying to learn the basic in's and out's of networking on my own through the use of a book. When it comes to routing tables I'm completely lost. I apologize for the alignment of the table below. The book vaguely explains routing tables, then has the following example:
E15.3) Consider the... (8 Replies)
Discussion started by: ksmarine1980
8 Replies
LEARN ABOUT NETBSD
route.conf
ROUTE.CONF(5) BSD File Formats Manual ROUTE.CONF(5)
NAME
route.conf -- static routes config file
DESCRIPTION
The route.conf file is read by the staticroute rc.d script during system start-up and shutdown, and is intended for adding and removing
static routes.
FILE FORMAT
Lines starting with a hash ('#') are comments and ignored. Lines starting with a plus sign ('+') are run during start-up, while lines start-
ing with a minus sign ('-') are run during system shutdown. If a line starts with a '!', the rest of the line will get evaluated as a shell
script fragment. All other lines are passed to route(8). During start-up, they are passed behind a ``route add -'' command and during shut-
down behind a ``route delete -'' command.
FILES
/etc/route.conf The route.conf file resides in /etc.
/etc/rc.d/staticroute
rc.d(8) script that parses route.conf.
EXAMPLES
In this example, the interface for the desired routing changes is set, the IP address on that interface is determined, and a route is added
during startup, or deleted during system shutdown.
# Set interface and determine current IP address for added route.
!ifname=bnx0
!ipaddr=$(/sbin/ifconfig ${ifname} | awk '$1 == "inet" {print $2}')
net 10.10.1 -interface ${ipaddr}
In this example, IP forwarding is turned on during start-up, and a static route added for 192.168.2.0. During system shutdown, the route is
removed and IP forwarding turned off.
# Turn on/off IP forwarding.
+sysctl -w net.inet.ip.forwarding=1
-sysctl -w net.inet.ip.forwarding=0
net 192.168.2.0 -netmask 255.255.255.0 192.168.150.2
SEE ALSO
rc.conf(5), rc(8), route(8)
BSD
May 1, 2012 BSD