I am trying to setup remote printing from a Linux machine (Red Hat 5.3) to an AIX machine (AIX 5.3). Remote printing for "normal" print jobs is working out OK, but I'm having trouble with some AIX printers that have a user defined backend.
I turned on logging for lpd on the AIX machine. When lpd submits the job using enq, it includes the option "-fl". From the lpd debug log:
I'm thinking it's a problem on the Linux side, because when I print from another AIX machine, there is no "-fl" included:
The "-fl" flag is getting passed to our backend process, which already has a -f option being supplied so it's failing. I can't find why/where the "-o-fl" is being submitted to enq, either on the Linux or AIX side. I can't seem to get detailed logging on the Linux side.
I am setting up a unix remote print server for approximately 500 printers. We send about 1,000 print jobs per day over the WAN. I am looking for hardware specs. I know I can overkill, but would rather get a sensible machine. Any suggestions? (2 Replies)
I am using Sco Openserver 5.0.6 and I have an Okidata 16n printer on a GETNET print server.
I am able to print to the printer. However I am having display issues.
Normally when I setup a local printer I am able to tell it what model to use. Ex.(HPLaserJet).
When I setup the remote... (2 Replies)
I'm trying to print from my Solaris server to a Windows Print Server
The Print Server will then pass the print job to a PC connected via dial-up and print it locally.
EG:
Solaris
-----
| |
| |
------
/88888/
-------
\
/
... (1 Reply)
I am looking for a dial-up remote printing solution as under :
1. We have a Centralized location where Sun Solaris (A) is installed. From here printing command will be despatched.
2. This printing command will be routed to WAN cloud to Main Branches (B1,B2,B3)and from there, printer at... (0 Replies)
Hi all,
I am an amature in AIX.I am facing a problem with remote printing in AIX5L...
One laser printer is there connected to a print server (HP),which is configured as remote printer from AIX Server.
Due to some problem the print server is replaced and the same is configured with the old... (3 Replies)
Dear Sir
Please how can I print a job localy with my printer while a server from where I am working belong to another network?
Actulally to print a job I am oblige to :
1rst to print it inside a file
2nd coping the file to my network (rcp)
3rt sending the file to my local printer (lp... (2 Replies)
Hello,
I also posted this on the AIX forum in hopes of getting help.
I am trying to setup remote printing from a Linux machine (Red Hat 5.3) to an AIX machine (AIX 5.3). Remote printing for "normal" print jobs is working out OK, but I'm having trouble with some AIX printers that have a user... (0 Replies)
Sir, i have a sco 5.5 installed server and 6 clients connected through pci specialix card and printing working fine in these all terminals. 7 and 8 ports are free now, i need to setup another terminal for login on through 7 or 8 port for remote login. i connect a external modem using 25 pin male... (2 Replies)
Hello all.
I am setting up a queue under AIX 4.2.1 to print to a remote Linux CUPS queue. At present I can print to the queue remotely from Windows but not AIX. What I am seeing is lpstat reads the state of the remote queue but at job submission time I am getting backend exit fatal errors. The... (4 Replies)
We are using Red Hat. We have a issue like this: We want to print from Linux, to a printer attached to a Windows machine. What we want to print is a PDF. It prints, but the printing starts from the middle of the page. In the report, there is no space at the top but still printing starts from the... (5 Replies)
Discussion started by: rohan69
5 Replies
LEARN ABOUT SUNOS
in.lpd
in.lpd(1M) System Administration Commands in.lpd(1M)NAME
in.lpd - BSD print protocol adaptor
SYNOPSIS
/usr/lib/print/in.lpd
DESCRIPTION
in.lpd implements the network listening service for the BSD print protocol specified in RFC 1179. The BSD print protocol provides a
remote interface for systems to interact with a local spooling system. The protocol defines five standard requests from the client to the
server: starting queue processing, transfering print jobs, retrieving terse status, retrieving verbose status, and canceling print jobs.
in.lpd is started from inetd. See inetd(1M). inetd waits for connections on TCP port 515. Upon receipt of a connect request, in.lpd is
started to service the connection. Once the request has been filled, in.lpd closes the connection and exits.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
non-zero An error occurred.
FILES
/etc/printers.conf
System printer configuration database.
printers.conf.byname
NIS version of /etc/printers.conf.
printers.org_dir
NIS+ version of /etc/printers.conf.
/usr/lib/print/bsd-adaptor/bsd_*.so*
Spooler translation modules.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpcu |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), inetadm(1M), inetd(1M), svcadm(1M), printers.conf(4), attributes(5), smf(5)NOTES
The in.lpd service is managed by the service management facility, smf(5), under the service identifier:
svc:/network/lp
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). Responsibil-
ity for initiating and restarting this service is delegated to inetd(1M). Use inetadm(1M) to make configuration changes and to view config-
uration information for this service. The service's status can be queried using the svcs(1) command.
SunOS 5.10 5 Aug 2004 in.lpd(1M)