Sponsored Content
Operating Systems Solaris routing problem after replacing hard drive Post 302312434 by snorkack59 on Friday 1st of May 2009 11:04:20 AM
Old 05-01-2009
routing problem after replacing hard drive

Need to replace hard drive on Ultra 10 running Solaris 2.6.
Bought new drive about the same size.
Partitioned it differently to solve a space problem.
After newfs used tar commands to copy most of the files to the new drive.
Installboot took care of the boot file.
ufsdump copied /dev and /devices.
After boot -r the computer boots and runs ok with new drive except no internet access.
During booting when the default route would normally be added I get:
route: socket: protocol not supported
When the multicast interface would normally be added the same error message is shown.
I used truss on route to manually add a default route but the output wasn't very helpful.
so_socket(24, 4, 0, "", 1) returns 3 on the old drive but Err#124 EAFNOSUPPORT
with the new drive.

Any suggestions on what the problem might be or where to look for it?
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

currupted my hard drive

Hello, earlier tonight I was installing BETA version of Mandrake Linux 9.0 and I realised I needed to partition my drive. I tried making the partition within mandrake but ther wasnt an option within the mandrake setup. So i go into my WindowsXP and do the disk management option but there want a... (5 Replies)
Discussion started by: xcaliber
5 Replies

2. Linux

hard drive specs?

Does anybody know what command will bring up my harddrive and how much room is left on it? (13 Replies)
Discussion started by: byblyk
13 Replies

3. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies

4. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies

5. SCO

USB hard drive problem

I have a USB hard drive attached to my SCO OSR6 machine I accidently powered it off while it was mounted and now the OS complains when you try to re-mount it and it appears that it is complaining because it has a new device number so it isn't at the original device location anymore. does anyone... (1 Reply)
Discussion started by: garycrow
1 Replies

6. SCO

Booting problem due to adding hard drive incorrectly

I have tried to (unsuccessfully) add an old drive to get drivers (for the 3Com network card) onto a Sco Openserver 5.1 server. Now it wont boot: I used Sco Admin to do this. It have 3 scuzzi drives I added an IDE I think what I did wrong was add the IDE to existing space, and I should not have... (6 Replies)
Discussion started by: lappies67
6 Replies

7. Filesystems, Disks and Memory

Problem with accessing my 2nd hard drive

Hello I am having a problem with being able to use my 2nd hard drive as my new os doesn't recognize it. it is /dev/hdb2 and it shows as It is still in my system. it is a 73 gb hard drive and it is useless to me now. I used to have windows XP and had no problem with it,I have since changed to... (2 Replies)
Discussion started by: Donald Spauldin
2 Replies

8. UNIX for Dummies Questions & Answers

Problem with damaged hard drive during bootup

Hello, I have a problem with the hard drive connected to my setup. When I connect the HDD which is damaged, and try to bring up my system, I get some error messages continuously on my console saying ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 frozen ata2.01: failed command:... (4 Replies)
Discussion started by: sai2krishna
4 Replies

9. UNIX for Beginners Questions & Answers

Problem setting path to external hard drive as a variable

Hello all, I am EXTREMELY new to using bash and I have a bit of a problem: I'm trying to set up a shell script that can 1.) take one of several giant files off of an external hard drive 2.) use it as input for scripts on my laptop's hard drive ... (3 Replies)
Discussion started by: machine_spirit
3 Replies
hdio(7I)							  Ioctl Requests							  hdio(7I)

NAME
hdio - SMD and IPI disk control operations SYNOPSIS
#include <sys/hdio.h> DESCRIPTION
Note - The SMC and IPI drivers have been discontinued. dkio(7I) is now the preferred method for retrieving disk information. The SMD and IPI disk drivers supplied with this release support a set of ioctl(2) requests for diagnostics and bad sector information. Basic to these ioctl() requests are the definitions in <sys/hdio.h>. IOCTLS
HDKIOCGTYPE The argument is a pointer to a hdk_type structure (described below). This ioctl() gets specific information from the hard disk. HDKIOCSTYPE The argument is a pointer to a hdk_type structure (described below). This ioctl() sets specific information about the hard disk. /* * Used for drive info */ struct hdk_type { ushort_t hdkt_hsect; /* hard sector count (read only) */ ushort_t hdkt_promrev; /* prom revision (read only) */ uchar_t hdkt_drtype; /* drive type (ctlr specific) */ uchar_t hdkt_drstat; /* drive status (ctlr specific, ro) */ }; HDKIOCGBAD The argument is a pointer to a hdk_badmap structure (described below). This ioctl() is used to get the bad sector map from the disk. HDKIOCSBAD The argument is a pointer to a hdk_badmap structure (described below). This ioctl() is used to set the bad sector map on the disk. /* * Used for bad sector map */ struct hdk_badmap { caddr_t hdkb_bufaddr; /* address of user's map buffer */ }; HDKIOCGDIAG The argument is a pointer to a hdk_diag structure (described below). This ioctl() gets the most recent command that failed along with the sector and error number from the hard disk. /* * Used for disk diagnostics */ struct hdk_diag { ushort_t hdkd_errcmd; /* most recent command in error */ daddr_t hdkd_errsect; /* most recent sector in error */ uchar_t hdkd_errno; /* most recent error number */ uchar_t hdkd_severe; /* severity of most recent error */ }; SEE ALSO
ioctl(2), dkio(7I) SunOS 5.10 13 Aug 2002 hdio(7I)
All times are GMT -4. The time now is 05:37 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy