Incredible is correct in saying that you can not move the dvd to the other domain on the mid-range mx000 servers. however, if you had a high-end server like the m8000 or m9000, you would use cfgadm at the xscf.
change dvd amongst domains:
why sun does not allow this for m5000, i couldn't tell you. however, our workaround was to take an old d240 we had around the office and hook it up to iou1 via a scsi adapter.
After upgrading to solaris 10 (from sol 8) on a SUN Blade 1500, it seems that the dvd/cd-rom does not accept dvds nor cds in the dvd drive.
After I insert a dvd/cd in the drive, the disk is simply ejected (!)
Is it possible that the upgrade made the system not being able to recognize these... (2 Replies)
I would like to check for the existance of media in a DVD drive prior to running a mkcd. Is this possible? I have accomplished this in the past with tctl, but that was with a tape drive. Any help is appreciated.
Thanks (0 Replies)
Hi there
In our Data centre we have a mixture of SPARCS running from v100 and ultra10's to v800 and v1250 boxes we also have a large amount of x86 X2100 and X4100 boxes
I am looking to purchase an external DVD-ROM drive that we can plug into the back of any of the boxes if we need to (I... (2 Replies)
Hello,
It's some tool in AIX to check what kind of media (DVD+RW DVD-RW DVD-RAM) is inserted in drive?
In linux there is very nice tool called dvd+rw-mediainfo. (0 Replies)
Hi Guys,
I think i probably know the answer to this question, but ill put it out there.
I have access to one, and only one SunFire v240 with no DVD drive. I have been tasked with installing Solaris 10 on there (Solaris 8 is on at the moment).
The obvious thing was to try a USB DVD... (4 Replies)
· Next, you will need to install the software package that provides DHCP services (a.k.a. the DHCP daemon software). It is located on the installation DVD ISO image for the CentOS Linux Distribution. Associate the (Disc 1 of 2) DVD ISO with the virtual machine's CD/DVD optical drive, create a... (1 Reply)
Hello,
I have some doubts about the dvd/cd physical on power machine and AIX.
I see on my AIX lpar and see there is 1 DVD drive and its physical location
bash-4.4# lsdev | grep cd0
cd0 Available 03-00-00 SATA DVD-RAM Drive
bash-4.4# lscfg -vpl cd0
cd0 ... (12 Replies)
Discussion started by: Phat
12 Replies
LEARN ABOUT LINUX
enable
enable(1) User Commands enable(1)NAME
enable, disable - enable/disable LP printers
SYNOPSIS
/usr/bin/enable printer...
/usr/bin/disable [-c | -W] [ -r [reason]] printer...
DESCRIPTION
The enable command activates printers, enabling them to print requests submitted by the lp command. enable must be run on the printer
server.
The disable command deactivates printers, disabling them from printing requests submitted by the lp command. By default, any requests that
are currently printing on printer will be reprinted in their entirety either on printer or another member of the same class of printers.
The disable command must be run on the print server.
Use lpstat -p to check the status of printers.
enable and disable only effect queueing on the print server's spooling system. Executing these commands from a client system will have no
effect on the server.
OPTIONS
The following options are supported for use with disable:
-c Cancels any requests that are currently printing on printer. This option cannot be used with the -W option. If the printer
is remote, the -c option will be silently ignored.
-W Waits until the request currently being printed is finished before disabling printer. This option cannot be used with the
-c option. If the printer is remote, the -W option will be silently ignored.
-r [reason] Assigns a reason for the disabling of the printer(s). This reason applies to all printers specified. This reason is
reported by lpstat -p. Enclose reason in quotes if it contains blanks. The default reason is "unknown reason" for the
existing printer, and "new printer" for a printer added to the system but not yet enabled.
OPERANDS
The following operand is supported for both enable and disable:
printer The name of the printer to be enabled or disabled. Specify printer using atomic name. See printers.conf(4) for information
regarding the naming conventions for atomic names.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
non-zero An error occurred.
FILES
/var/spool/lp/* LP print queue.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpcu |
+-----------------------------+-----------------------------+
|CSI |enabled |
+-----------------------------+-----------------------------+
SEE ALSO lp(1), lpstat(1), printers.conf(4), attributes(5)SunOS 5.10 9 Sep 1996 enable(1)