04-17-2009
try this..
luxadm -e forcelip /dev/cfg/c3
check the status of HBA leds and let us know what you see
10 More Discussions You Might Find Interesting
1. IP Networking
I have a new server... We were doing some testing on it over the local ethernet. All was well in the night when we turned off the machine. In the morning we were unable to get the server online. Have changed cables, NICs, looked over network settings... all to no avail.
I am running Redhat... (4 Replies)
Discussion started by: skotapal
4 Replies
2. Solaris
Hi All,
How to keep the volumes offline after reboot also, i make it offline like below
# metaoffline d0 d20
after reboot its automatically getting online, however i have to keep it offline and as on required i have to make it online as per business.
Thanks in anticipation (9 Replies)
Discussion started by: kumarmani
9 Replies
3. Shell Programming and Scripting
Hi,
Is there any command for showing offline users?
The only way I can think of doing it (as i cant find a command) is getting a list of all the online users, and comparing it to /etc/passwd, anything that is in /etc/passwd and not in the users file will be offline users. But I have no... (4 Replies)
Discussion started by: mikejreading
4 Replies
4. Solaris
I have an HBA on a Sun-Fire-V215 server that suddenly went offline. Please i need help.
the two leds at the back of the HBA are blinking green. (4 Replies)
Discussion started by: chykeman
4 Replies
5. UNIX for Advanced & Expert Users
what is the command for checking which device active and which is not active (1 Reply)
Discussion started by: RahulJoshi
1 Replies
6. UNIX for Dummies Questions & Answers
Hello,
I currently use Solaris, and typically I use the
svcs -a | grep PROCESS
to see if it's online or Offline.
My questions is SVCS is in solaris but if I want to find out if a daemon or process is offline what other methods can I use?
ps -ef | grep PROCESS "what do I look for"
or... (1 Reply)
Discussion started by: NelsonC
1 Replies
7. Red Hat
Hello all,
I have a USB drive mounted on a linux RHEL 4 server which goes offline every now n then.
Here are some logs :
---------------------------------------------
# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002... (1 Reply)
Discussion started by: sunny_a_j
1 Replies
8. Solaris
Hi,
I need to offline one of the CPUs in my M4000. I'm going to use the psradm command to offline the CPU. Do I need to do anything before offlining the CPU like unbinding processes etc? The servers are running oracle databases which I will shutdown beforehand.:confused:
Thanks,... (0 Replies)
Discussion started by: sparcman
0 Replies
9. Solaris
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
10. Hardware
Offline Log Collection Steps:-
A. Offline Test Report (3 Loop) .
1. Boot the server with Smart Start CD.
2. Select language - English.
3. Select Maintain server.
4. Select Diagnose Server.
5. In Test Tab
Test mode - Unattended.
... (0 Replies)
Discussion started by: taherahmed
0 Replies
LEARN ABOUT REDHAT
setleds
SETLEDS(1) General Commands Manual SETLEDS(1)
NAME
setleds - set the keyboard leds
SYNOPSIS
setleds [-v] [-L] [-D] [-F] [{+|-}num] [{+|-}caps] [{+|-}scroll]
DESCRIPTION
Setleds reports and changes the led flag settings of a VT (namely NumLock, CapsLock and ScrollLock). Without arguments, setleds prints the
current settings. With arguments, it sets or clears the indicated flags (and leaves the others unchanged). The settings before and after
the change are reported if the -v flag is given.
The led flag settings are specific for each VT (and the VT corresponding to stdin is used).
By default (or with option -F), setleds will only change the VT flags (and their setting may be reflected by the keyboard leds).
With option -D, setleds will change both the VT flags and their default settings (so that a subsequent reset will not undo the change).
This might be useful for people who always want to have numlock set.
With option -L, setleds will not touch the VT flags, but only change the leds. From this moment on, the leds will no longer reflect the VT
flags (but display whatever is put into them). The command setleds -L (without further arguments) will restore the situation in which the
leds reflect the VT flags.
One might use setleds in /etc/rc to define the initial and default state of NumLock, e.g. by
INITTY=/dev/tty[1-8]
for tty in $INITTY; do
setleds -D +num < $tty
done
OPTIONS
-num +num
Clear or set NumLock. (At present, the NumLock setting influences the interpretation of keypad keys. Pressing the NumLock key com-
plements the NumLock setting.)
-caps +caps
Clear or set CapsLock. (At present, the CapsLock setting complements the Shift key when applied to letters. Pressing the CapsLock
key complements the CapsLock setting.)
-scroll +scroll
Clear or set ScrollLock. (At present, pressing the ScrollLock key (or ^S/^Q) stops/starts console output.)
BUGS
In keyboard application mode the NumLock key does not influence the NumLock flag setting.
SEE ALSO
loadkeys(1)
24 Sep 1994 SETLEDS(1)