04-17-2009
you can choose not to use LDOMS too.,
10 More Discussions You Might Find Interesting
1. Solaris
We used kstat on netra240/440 to check if the link is full duplex. So we do something like:
bash-3.00# kstat -pc net bge:1::/'link_duplex'/ | cut -f2
2
The output 2 indicates the link is full duplex. This kind of check worked all right for Netra 240/440 systems.
However, the nxge... (2 Replies)
Discussion started by: illcar
2 Replies
2. Solaris
I 've 2 different T5220 and both are showing different prompts when i ssh to the console.
1. Shows sc> ALOM
2. Shows -> ILOM
as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?
and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies
3. Solaris
Hi I;ve a T5220 box running solaris 10 update 6 with 6 zones on it and zfs SAN file systems is it possible to configure Control domain on this box without removing the exisinting OS and zones ? (1 Reply)
Discussion started by: fugitive
1 Replies
4. Solaris
Hi,
SC on one of my T5220 is not responding .. it does not show not let me type anything .. what could be the reason for it ? though when i powercycle the box from sc it shows me the system coming up but after that does not let me login thru sc
sc> console -f
Enter #. to return to ALOM. (2 Replies)
Discussion started by: fugitive
2 Replies
5. Solaris
Hi,
We have two T5220 servers in our datacentre
one server is showing 64 processors online
and another showing 32 processors online
two are newly purchased, there is no hardware faults in this server
one server has 64gb memory and it shows 64 processors,
and other having 32gb memory and it... (5 Replies)
Discussion started by: rajasekg
5 Replies
6. Solaris
I'm trying to use a V210 (sun4u) configured as a jumpstart server to flash install a number of T5220's (sunv4).
The Facts:
V210 - Solaris 10 (September 2010 Release / not patched)
T5220's - Archive's created using prior (unknown) version of solaris 10.
Flar -i <archive name> shows the... (6 Replies)
Discussion started by: Celtic_Monkey
6 Replies
7. Solaris
Hi Guys and Gals,
Wondering if anyone could help me, tricky one this.
Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc.
But no matter what version of Solaris 10 you use, when you do a boot cdrom... (1 Reply)
Discussion started by: callmebob
1 Replies
8. Solaris
Hello guys,
can anyone give me some advice on how to perform
clean installation of Solaris 10 on T5220 ?
I am connected with serial management port on the machine,
i have the ok promt and now i should eject the dvdrom to insert
Solaris dvd into and start the clean install.
So how to do that... (3 Replies)
Discussion started by: tonijel
3 Replies
9. Solaris
Hi,
I got a (used) server to install Solaris 11 and wipe out every information on existing disks. There are 6 disks of 300GB and two disks of 146GB. I am not able to figure out, how to find out RAID (if there is any) and break it. Can anybody help me with that ? Below is configuration. I have... (18 Replies)
Discussion started by: solaris_1977
18 Replies
10. Solaris
Hi,
I want to install Solaris-11 on T5220. I created USB from sol-11_4-text-sparc.usb by usbcopy on another Solaris-11 servers, which looks like a good one.
I tried did "reset-all" and still same issue. Can I get some help on this.
{0} ok reset-all
Sun Netra T5220, No Keyboard
Copyright... (8 Replies)
Discussion started by: solaris_1977
8 Replies
LEARN ABOUT ULTRIX
lprsetup
lprsetup(8) System Manager's Manual lprsetup(8)
Name
lprsetup - printer spooler set up program
Syntax
/etc/lprsetup
Description
The command provides an interactive easy-to-use facility for administrating the line printers on your system. The program contains on-line
help and default answers to questions about adding, deleting, or changing the characteristics of any of the line printers on your system.
Whenever a question is asked, the default selection is given in ] . You can press Return in response to the question to accept the
default, or enter an alternate value for the given parameter.
The program knows about all of the possible symbols in the file. See for a current list. After you have entered a printer specification,
and have verified that it is correct, then creates the spooling directory, links the output filter, and creates an entry for the new
printer.
If the printer is connected to your system, you must specify the printer device name which is in the lp printcap entry.
If lp is set to nn you are prompted to choose between or If your printer is connected to a port on your system, choose the default setting,
If you choose you are prompted for the baud rate, br. The default is the recommended baud rate for the printer.
If you want to set up your printer to a LAT line, choose the option. At this point, proceeds only if you have chosen a valid LAT device
for lp. It assumes that the LAT device has been configured for host initiated connections using If it has not, you must do this before the
queue works. For information about how to set up a LAT line, see Chapter 3 of the Guide to Ethernet Communications Servers.
If lp is set to another device, for example the program assumes that you are setting up a printer with a parallel port, for example, It
does not prompt you for device type information, and serial port specific entries are not put into the entry.
See Also
printcap(5), lpc(8), MAKEDEV(8)
Guide to Ethernet Communications Servers
Guide to System Environment Setup
lprsetup(8)