USB port is disabled using BIOS, I want to enable it Post: 302307670

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

How to enable a disabled Unix account on HP-UX

I am very new to Unix. We have a Unix user account that was disabled due to multiple tries with an invalid password. How to enable the account?

2. Solaris

disabled telnet now need port 23 or port 22

we disabled telnet on solaris 9 via previous a thread. We use CMS (call management system) supervisor which used port 23 (telnet). We cannot use telnet via local directive and it was shut down as stated when we shut down telnet in the inetd file. I cannot now log into the CMS box since port 23 is...

3. Solaris

network on solaris 10, through usb port...(urgent)

hi all, I have been trying to setup network on solaris10 from a long time but am unable to do so.. I tried it with the ethernet card i have(dfe -520tx) but since i was not able to find drivers for that particular device, i thought of using the usb mode to run network.. However am not able...

4. UNIX for Advanced & Expert Users

how to watch the usb port

I want to watch the USB ports. If any device is connected to the USB port I want to take the name of the device and I want to log the device name. how to watch all the USB ports. How to find the device is connected in which usb port.

5. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. HP-UX

Enable ftp port

Hi Experts, Need your help in enabling the ftp port in HP-UX box. Is there any command/config file that needs to be changed? Also is it possible to open it only for few selected IPs only?

8. UNIX for Dummies Questions & Answers

Restarting/Resetting a USB Port?

Hello All, So I have been running into an issue with a USB Modem where if someone ends their dialin connection abruptly from the other side the modem gets stuck and I found that the only way to fix it is to either unplug the USB Modem and plug it back in, or just reboot. I'd rather not reboot...

9. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

10. Shell Programming and Scripting

USB port events linstening

Hi everybody! :) I am a complete newbie. :D Is it possible to write a script (shell or python) to listen to usb port event and to notify me every time an usb storage key is plugged or ejected? I want it to echo the device to mount (eg. /dev/sdb). I wrote an udev rule wich runs a script after...

LEARN ABOUT FREEBSD

trm

TRM(4)							   BSD Kernel Interfaces Manual 						    TRM(4)

NAME

     trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device scbus
	   device trm

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   trm_load="YES"

DESCRIPTION

     The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

HARDWARE

     SCSI controllers supported by the trm driver include:

     o	 Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
     o	 Tekram DC-315U PCI Ultra SCSI adapter without BIOS
     o	 Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
     o	 Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
     o	 Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
     o	 Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

     For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.

SEE ALSO

     cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

     http://www.tekram.com/

AUTHORS

     The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard
     <cognet@FreeBSD.org>.

BSD
								 December 8, 2002							       BSD

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

How to enable a disabled Unix account on HP-UX

Discussion started by: kajap

2. Solaris

disabled telnet now need port 23 or port 22

Discussion started by: panzerkw

3. Solaris

network on solaris 10, through usb port...(urgent)

Discussion started by: wrapster

4. UNIX for Advanced & Expert Users

how to watch the usb port

Discussion started by: ungalnanban

5. Solaris

How to enable hba port of a two port hba card

Discussion started by: rishiraaz

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Discussion started by: bobby320

7. HP-UX

Enable ftp port

Discussion started by: sai_2507