04-12-2009
We don't have a HMC station for this p640 yet. What type of HMC station do you recommened? Thank you!
Quote:
Originally Posted by
Cesar Delgado
Hi, Yes. That cable does the same job. In a p6xX server there are two serial ports used to connect the server to HMC station. Those servers of the p6xx models connect to the HMC using serial comm. New servers of the p5xx models use Ethernet in order to connect to the HMC. If you don't have a HMC you can use those serial ports to open serial terminal consoles or you can use the RJ45 port to do the same. Just need a different type of cable. Hope this helps
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi,
I have been using a computer to keep track of inventory for my business. I am pretty sure it runs on Unix. In the back of the computer there is some sort of PCI card that has about 8 RJ-11 ports on it. I use that card to connect the Unix system to my 3 VT-220 terminals. I use a simple 6... (1 Reply)
Discussion started by: john202
1 Replies
2. UNIX for Dummies Questions & Answers
Hi,
I have PC with Linux OS RHEL3 and USB port is disabled from BIOS. BIOS access is protected using password. But, I have root access. Now, how can I enable USB port using root access? Is there any trick that I can do using root access that can enable USB port once my PC has booted up? (3 Replies)
Discussion started by: gydave
3 Replies
3. IP Networking
i have wireless usb adapter rtl8187 from micromax company
my proplem is the signal is very weak and i cannot open website
can i increase the signal ?
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0... (5 Replies)
Discussion started by: rsd220
5 Replies
4. UNIX for Advanced & Expert Users
I want to watch the USB ports.
If any device is connected to the USB port I want to take the name of the device and
I want to log the device name. how to watch all the USB ports.
How to find the device is connected in which usb port. (1 Reply)
Discussion started by: ungalnanban
1 Replies
5. AIX
Hello,
I have an old Pseries P520 9111-520 and it doesn't have the PCI graphics - video - display card in it.
On the back side of it, I can see two serial ports.
What is the easiest way to put console display for this system ?
Would a serial cable ( null modem cable ) from Pseries to... (5 Replies)
Discussion started by: filosophizer
5 Replies
6. UNIX for Dummies Questions & Answers
Hello All,
So I have been running into an issue with a USB Modem where if someone ends their dialin connection abruptly from the other side the modem gets stuck
and I found that the only way to fix it is to either unplug the USB Modem and plug it back in, or just reboot. I'd rather not reboot... (5 Replies)
Discussion started by: mrm5102
5 Replies
7. UNIX for Dummies Questions & Answers
Hi all
unixware 7.1.3 I'm afraid ! I connected a usb tape drive and it was automatically recognised in the device list (sdiconfig -l) and created devices in /dev/rmt (ctape1 etc.). I could successfully read and write to the device.
Then unplugged the usb cable and plugged it back in again... (0 Replies)
Discussion started by: deel
0 Replies
8. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
9. Shell Programming and Scripting
Hi everybody! :)
I am a complete newbie. :D Is it possible to write a script (shell or python) to listen to usb port event and to notify me every time an usb storage key is plugged or ejected? I want it to echo the device to mount (eg. /dev/sdb).
I wrote an udev rule wich runs a script after... (1 Reply)
Discussion started by: manuhexadec
1 Replies
10. Linux
I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID... (7 Replies)
Discussion started by: rbatte1
7 Replies
LEARN ABOUT DEBIAN
fence_lpar
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)
NAME
fence_lpar - Fence agent for IBM LPAR
DESCRIPTION
fence_lpar accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent.
fence_lpar can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
PARAMETERS
-o, --action=<action>
Fencing Action (Default Value: reboot)
-a, --ip=<ip>
IP Address or Hostname This parameter is always required.
-l, --username=<name>
Login Name This parameter is always required.
-p, --password=<password>
Login password or passphrase
-S, --password-script=<script>
Script to retrieve password
-x, --ssh
SSH connection (Default Value: 1)
-k, --identity-file=<filename>
Identity file for ssh
-n <id> Name of the partition
Partition name
-s <id> Name of the managed system
Managed system name
-H, --hmc-version=<version>
Force HMC version to use (3 or 4) (Default Value: 4)
-c, --command-prompt=<prompt>
Force command prompt (Default Value: [':~>', ']$', '$ '])
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-u, --ipport=<port>
TCP port to use for connection with device
-v, --verbose
Verbose mode
-D, --debug-file=<debugfile>
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=<char>
Separator for CSV created by operation list (Default Value: ,)
--power-timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
--shell-timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--login-timeout
Wait X seconds for cmd prompt after login (Default Value: 15)
--power-wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay
Wait X seconds before fencing is started (Default Value: 0)
--retry-on
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
monitor
Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
metadata
The operational behavior of this is not known.
STDIN PARAMETERS
action Fencing Action (Default Value: reboot)
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
passwd_script
Script to retrieve password
secure SSH connection (Default Value: 1)
identity_file
Identity file for ssh
partition
Partition name
managed
Managed system name
hmc_version
Force HMC version to use (3 or 4) (Default Value: 4)
cmd_prompt
Force command prompt (Default Value: [':~>', ']$', '$ '])
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ipport TCP port to use for connection with device
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by operation list (Default Value: ,)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 15)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_lpar (Fence Agent) 2009-10-20 FENCE_AGENT(8)