If you are using Veritas Netbackup (now owned by Symantec?) then it comes with commands to this, robtest, e.g.:
Run robtest and then type in:
You need to quit from robtest once you are done otherwise Netbackup will not work while waiting for robtest to release the tape library.
hi all
need your help.
I am wrting a script that will load data into the table.
then on another load will append the data into the existing table.
Regards
Ankit (1 Reply)
Hi,
I' using a sun solaris server, I would like to known if there is the possibility to control how many space is free on a tape and how I can delete a single file on a tape.
Thanks
DOMENICO (3 Replies)
Hi there: I'm new here
Can anyone help me:
I have DS15 Alpha server : Unix 5.1B
Now i need to connect a DLVT VS80 1U Rackmount Tape Drive unit.
What is the exact comman to mount the DLTape IV??
How do i make backuo @ copy file to the tape?
Thanx to all (0 Replies)
when I do a tape status /dev/rStp0 I get the following on a new tape and I have tried several:
Status : ready beginning-of-tape
soft errors : 0
hard errors: 2
underruns: 5
My BackupEdge has stopped backing up my system because it asks for a new volume yet my total system data is under 20... (5 Replies)
Hello,
We need to make a copy of a backup tape, using the 2 tape recorders in IBM 3582 Tape Library
We tried tu use "tcopy", it seems to work fine (no error messages) but we aren't sure if we can rely on it.
my question is how to check if the copy succeded or not, but i also want to know... (3 Replies)
I am using a 4mm tape to backup my Unix system. However, I wanted to make a copy all of the files and archive headers (or just the archive headers if that's possible) created on one of my tapes to another 4mm tape. I only have one tape drive. Is there a command that will complete such task? ... (1 Reply)
I am trying to use this command to eject the tape
mt -f /dev/rmt/0 unload
but it gives me error
mt -f /dev/rmt/0 unload
mt: 0511-575 unload is not a recognized subcommand.
Usage: mt Subcommand
Valid subcommands are:
weof
eof
fsf
bsf
... (5 Replies)
Hello, on my hostserver i see one VPS of mine got load of 200.00 and netstat nothing (not a single blank line on netstat command) after some time, netstat started showing connections, but i see no excessive IP connections.
tail -f /var/log/httpd/access_log shows no activity
/var/log/messages ;... (1 Reply)
Discussion started by: postcd
1 Replies
LEARN ABOUT HPUX
st
st(1M)st(1M)NAME
st - shared tape administration
SYNOPSIS
device_file
DESCRIPTION
The command provides users with a command-line interface to check the status of a shared tape device or to reclaim a shared tape device
from a host system that has failed while holding a reservation on the shared tape device. The command can also be used for the same pur-
pose on shared library robotic devices. To use the command you must have root user id.
Please see examples below for usage.
Options
recognizes the following options and arguments:
Specifies the tape device file or sctl/esctl pass-through device
file for the shared tape/library device. This parameter is mandatory and will report an error if device_file is omitted.
Allows the user to reclaim a shared tape device or shared
library robotic device in the case where a host failed while holding a reservation on the shared device. This option causes
a bus device reset to be issued to the device specified by the option.
Prints out the current status of the shared tape/library
device specified by the option.
RETURN VALUE
returns 0 upon successful completion and 1 otherwise.
EXAMPLES
The following shows three examples of output from the above command.
The above output indicates that the shared device is reserved by another host and is therefore unavailable at this time.
The above output indicates that the shared device is not ready for use at this time.
The above output indicates that the shared device is ready for use at this time.
To reclaim a shared tape/library device from a failed host, the following command can be used:
WARNINGS
The option must be used with care. When reclaiming devices, it must be ensured that the host from which the device is being reclaimed has
in fact failed, as data may be lost as the result of reclaiming a device that is currently in use by another host.
AUTHOR
was developed by Hewlett-Packard.
SEE ALSO mt(1), scsi(7), scsi_ctl(7).
st(1M)