04-09-2009
The Solstice manual I used to teach myself included a bit about this situation; there is a small chance it won't work with the current version of SVM. It stated that you can use a swap partition to hold the metadbs IF you put the dbs on the partition before using it for swap. So you'd need to comment out the swap line in vfstab, reboot, add the metadbs, reboot, enable the swap, then reboot again.
I've never actually tried it and it's worth checking the current SVM doc on docs.sun.com.
9 More Discussions You Might Find Interesting
1. Solaris
Hi Guys,
Need to add 2 disks into a JBOD array (3310).
Does anyone see anything wrong with my Procedure / Doco below?
1> Logon to system, check system logs for abnormal entries.
2> Make backups of related system files:
A>cp -p /etc/system /etc/system.backup.081505
B>cp -p /etc/vfstab... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
2. Solaris
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
Discussion started by: Jartan
10 Replies
3. UNIX for Dummies Questions & Answers
I have a Sun box running Solaris 9.
My root disk was slices too small when it was installed and I am now at 99% capacity for my root partition.
Is it possible, and if so how?, to increase the size of slice 0 and decrease the size of slice 7??
Thanks!
Current partition table... (6 Replies)
Discussion started by: FredSmith
6 Replies
4. Solaris
Really sorry for the long posting. But i would really want to clear all the doubts.
I have 2 disk c0t0d0 & c0t1d0, i wanted to mirror c0t1d0 (mirror) to c0t0d0 (main).
Creating state database replica:
metadb -a -c3 -f c0t0d0s7
... (3 Replies)
Discussion started by: beginningDBA
3 Replies
5. Solaris
Dear All,
Please help me to configure root mirroring using SVM in Solaris 9.
Thanks and Regards,
Lakkireddy BR (3 Replies)
Discussion started by: lbreddy
3 Replies
6. Solaris
Hello All,
I am trying to mirror two non-root hard drives using zfs. But "fmthard" fails when I try to copy the vtoc due to disk mismatch. Please help me.
--- iostat command shows the disk to be similiar
--- format command shows disk to be different :confused:
--- c1t2d0 is the active... (8 Replies)
Discussion started by: pingmeback
8 Replies
7. Solaris
I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system
and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
Discussion started by: Laxxi
6 Replies
8. Solaris
I would like to perform root disk mirroring task. Can someone please help me out on this.
Thanks !!
Regards,
Rama (2 Replies)
Discussion started by: ramagore85
2 Replies
9. UNIX for Advanced & Expert Users
We have two node cluster with OS disk mirrored under SVM. There is slight disk problem on one of the mirror disk causing cluster to panic.
Failure of one mirror disk causing VCS to panic the node. Why VCS is not able to write /var filesystem, as one of the disk is healthy.
... (1 Reply)
Discussion started by: amlanroy
1 Replies
LEARN ABOUT OSF1
volmirror
volmirror(8) System Manager's Manual volmirror(8)
NAME
volmirror - Mirrors volumes on a disk or control default mirroring
SYNOPSIS
/usr/sbin/volmirror [-g diskgroup] [-d yes|no] medianame [new_medianame...]
/usr/sbin/volmirror [-g diskgroup] [-d yes|no] -a [new_medianame...]
/usr/sbin/volmirror [-g diskgroup] [-d yes|no]
/usr/sbin/volmirror [-g diskgroup] -D
OPTIONS
The volmirror command supports the following options: Limits operation of the command to the given disk group, as specified by disk group
ID or disk group name. The medianame operands will be evaluated relative to the given disk group. If no disk group is supplied to the
volmirror command, rootdg is presumed. Changes the default for subsequent volume creation, depending on the option argument. If the option
argument is yes, all subsequent volumes created using the volassist command will automatically be created as mirrored volumes. If the
option argument supplied is no, mirroring will be turned off for future volumes by default. Displays current default status for mirroring.
Mirrors all existing volumes for the specified disk group.
DESCRIPTION
The volmirror command provides a mechanism to mirror all the contents of a specified disk, to mirror all currently unmirrored volumes in
the specified disk group, or to change or display the current defaults for mirroring. All volumes that have only a single plex (mirror
copy), will be mirrored by adding an additional plex.
Volumes containing subdisks that reside on more than one disk will not be mirrored by volmirror.
The volmirror command is generally called from the voldiskadm menus. It is not an interactive command and once called, will continue until
completion of the operation or until a failure is detected.
Note
Due to the nature of generating mirror copies of volumes, this command may take a considerable time to complete.
In the first listed form of the command, the disk media name is supplied on the command line to volmirror. That name is taken to be the
only disk from which volumes should be mirrored. In the case of mirroring volumes from a specified disk, only simple single-subdisk volumes
are mirrored.
In the first and second listed forms of the command, the new_medianame ... parameter identifies a new disk media name (or set of names).
The mirroring operation being performed will use these names as targets on which to allocate the mirrors. An error will result if the same
disk is specified for both the source and target disk and if no other viable targets are supplied.
EXAMPLES
The following are examples of the use of the volmirror command. The following command mirrors the contents of the disk named disk01 to any
available space on any available disk. Subsequent calls to volassist will cause created volumes to be mirrored by default. volmirror -d
yes disk01 The following command displays the current status of default mirroring. It prints the string yes if mirroring is currently
enabled or no, if not. volmirror -D The following command mirrors any volumes on disk02 onto disk03. volmirror disk02 disk03
FILES
The defaults file for volassist parameters.
SEE ALSO
volintro(8), volassist(8), volrootmir(8)
volmirror(8)