Logging network connections Post: 302303474

9 More Discussions You Might Find Interesting

1. Linux

active network connections

how can i see active network connections

2. Solaris

Logging Connections in Solaris

Hi All, Is there a built in function/tool in Solaris that enables creation of a history file on any connection (via telnet, ssh, rsh or nfs) to Solaris machine? I would like to create a script that records IP Address, date and timestamp, and command excuted for any connection to a Solaris...

3. Solaris

logging incoming connections on solaris 10

i've been able to log incoming telnet and ssh connections on solaris 9 using the following lines in /etc/syslog.conf # Telnet connections are logged to auth.notice auth.notice /var/adm/authlog # An entry in /etc/profile logs all telnet connections...

4. IP Networking

preferred network connections

I rotate between a static lan, dhcp lan, and various wireless networks daily. Is there a way to set preferred network connections? I use some static ip's daily, some static ip's like once a month, and almost never use the dhcp lan. The same I do with my various wireless networks. Some I use daily...

5. IP Networking

2 WAN connections on 1 switch/network

I want to know potential problems with the following scenario OR if it is an ok way to have my network setup: I have 2 WAN connections to the internet. I have each WAN connection plugged into its own router. Router DD-WRT is gateway for servers (192.0.10.50). Router Tomato is gateway for pc's...

6. UNIX for Advanced & Expert Users

Not logging ftp connections in /var/adm/wtmpx file (in last command output)

Hi all, I have F5 load balancer on my system and checking service status by opening an ftp session in every 30 seconds. These ftp sessions are being logged in /var/adm/wtmpx and filling up the file. when i run the last command most of the output is this ftp session. I was wondering if there is a...

7. Shell Programming and Scripting

Could you help me writing a script showing which network connections are currently active?

Could you help me writing a script showing which network connections are currently active? Means output should be something like: "eth0, wlan1, wlan3" Problem: The output is supposed to happen on a 16x2 LCD Display. Currently I am doing a "Ifconfig" as output, but its too fast for the...

8. Solaris

Configuring central logging server for network devices

Hi I am very well aware of configuring central logging (syslog)server on solaris to capture logs of other solaris servers. But don't know how to capture the logs of network devices like Juniper , cisco etc on solaris server. Is this possible through syslog server of solaris. Is there any way we...

9. UNIX for Advanced & Expert Users

Network Connections

I have a static IP 47.21.154.146 and two computers which I wish to talk to each other. The two IPs are 198.168.1.5 and 198.168.1.6. How do I do it. For example ls from one computer to the other. TIA

LEARN ABOUT DEBIAN

ucmatose

UCMATOSE(1)							     librdmacm							       UCMATOSE(1)

NAME

       ucmatose - RDMA CM connection and simple ping-pong test.

SYNOPSIS

       ucmatose [-s server_address] [-b bind_address] [-c connections]
		 [-C message_count] [-S message_size]
       ucmatose -s server_address [-b bind_address] [-c connections]
		 [-C message_count] [-S message_size] [-t tos]

DESCRIPTION

       Establishes  a  set  of	reliable RDMA connections between two nodes using the librdmacm, optionally transfers data between the nodes, then
       disconnects.

OPTIONS

       -s server_address
	      The network name or IP address of the server system listening for connections.  The used name or address must  route  over  an  RDMA
	      device.  This option must be specified by the client.

       -b bind_address
	      The local network address to bind to.

       -c connections
	      The number of connections to establish between the client and server.  (default 1)

       -C message_count
	      The number of messages to transfer over each connection.	(default 10)

       -S message_size
	      The size of each message transferred, in bytes.  (default 100)

       -t tos Indicates  the  type  of service used for the communication.  Type of service is implementation dependent based on subnet configura-
	      tion.

       -m     Tests event channel migration.  Migrates all communication identifiers to a different event channel for disconnect events.

NOTES

       Basic usage is to start ucmatose on a server system, then run ucmatose -s server_name on a client system.

       Because this test maps RDMA resources to userspace, users must ensure that they have available system resources and permissions.   See  the
       libibverbs README file for additional details.

SEE ALSO

       rdma_cm(7), udaddy(1), mckey(1), rping(1)

librdmacm							    2007-05-15							       UCMATOSE(1)