Ethernet Port Name Post: 302300691

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

determining ethernet port speed in solaris

i purchased, what was labeled as a 4-port fast ethernet sbus card from ebay. i installed it in my ultra1, and it seems to be working fine. how can i determine if the card is infact a fast ethernet card vs. the standard ethernet 4-port card?

2. Solaris

Reg. Ethernet port

Hi Friends, I am using intel system installed solaris 10, when i check ifconfig -a it doesn't show any thing eg-for HP servers hme0, for sun servers-iprb0. for me it doesn't show any thing, and tell me what files to be modified. Thanks in Advance.

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. AIX

A problem with an unused ethernet port reporting as down...

Good morning, Saw this on a system this morning, thought I'd check with this group before calling IBM. Basically what we have here is a P7 running 6.1 reporting the following in errpt: LABEL: GOENT_LINK_DOWN IDENTIFIER: EC0BCCD4 This is for ent4, which is odd because we...

5. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter...

6. Shell Programming and Scripting

command to match ethernet port to network card

hi I juts want to know if there is a command that checks if an ethernet port corresponds to a network card. ex. I have 3 network cards, one is two ports, and the other two 8 ports. How do I know that eth0 corresponds to the the two-port network card and eth9 corresponds to the first 8-port...

7. Red Hat

Ethernet Port device path?

Hi, I have a server program that reads data coming in on USB ports. Device paths are in the format: /dev/ttyUSB0 Now, I would like to log data from another device coming in over Ethernet. My first step is trying to track down what the correct device path is which I am unsure of. Anyone...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT DEBIAN

vconsole.conf

VCONSOLE.CONF(5)						   vconsole.conf						  VCONSOLE.CONF(5)

NAME

       vconsole.conf - configuration file for the virtual console

SYNOPSIS

       /etc/vconsole.conf

DESCRIPTION

       The /etc/vconsole.conf file configures the virtual console, i.e. keyboard mapping and console font.

       The basic file format of the vconsole.conf is a newline-separated list environment-like shell-compatible variable assignments. It is
       possible to source the configuration from shell scripts, however, beyond mere variable assignments no shell features are supported,
       allowing applications to read the file without implementing a shell compatible execution engine.

       Note that the kernel command line options vconsole.keymap=, vconsole.keymap.toggle=, vconsole.font=, vconsole.font.map=,
       vconsole.font.unimap= may be used to override the console settings at boot.

       Depending on the operating system other configuration files might be checked for configuration of the virtual console as well, however only
       as fallback.

OPTIONS

       The following options are understood:

       KEYMAP=, KEYMAP_TOGGLE=
	   Configures the key mapping table of for they keyboard.  KEYMAP= defaults to us if not set. The KEYMAP_TOGGLE= can be used to configured
	   a second toggle keymap and is by default unset.

       FONT=, FONT_MAP=, FONT_UNIMAP=
	   Configures the console font, the console map and the unicode font map.  FONT= defaults to latarcyrheb-sun16.

EXAMPLE

       Example 1. German keyboard and console

       /etc/vconsole.conf:

	   KEYMAP=de-latin1
	   FONT=latarcyrheb-sun16

SEE ALSO

       systemd(1), loadkeys(1), setfont(8), locale.conf(5)

AUTHOR

       Lennart Poettering <lennart@poettering.net>
	   Developer

systemd 							    10/07/2013							  VCONSOLE.CONF(5)