03-24-2009
hi,
that should work:
umount them and then issue this command:
# cfgadm -o force_update -c unconfigure c4::5006016130206b9d
# cfgadm -o force_update -c unconfigure c4
and the same for every controller. it that doesn't work, just disconnect the cables, then you will see:
c4::5006016130206b9d,0 disk connected configured unusable
when it is marked as "unusable" you can use that:
# cfgadm -o unusable_FCP_dev -c unconfigure c4::5006016130206b9d
to remove the "dev" entries, you should also use:
# devfsadm -Cv
kind regards
- pressy
9 More Discussions You Might Find Interesting
1. Solaris
I Have IBM ESS 800, trying to configure SAN storage using Fiber card. I installed the SDD driver & can see the disks however, when I did
# datapath query device
I have the disks shown in slices
# ./datapath query device
Total Devices : 8
Dev#: 0 Device Name: vpath1a Type:... (0 Replies)
Discussion started by: Remi
0 Replies
2. Solaris
Hi,
How can we differentiate a SAN disk with a Solaris local disk?
Please respond.
Thanks (4 Replies)
Discussion started by: balu_solaris
4 Replies
3. UNIX for Advanced & Expert Users
Hi,
I have 4 servers that I connected SUN HBAs on. (SAN is IBM - ESS 800 with Brocade switch)
I installed the SAN foundation kit, IBMsdd drivers, Solaris Patch 108974-50 & SANsurfer CLI.
(I'm running Solaris 8 - HBA is SG-XPC11FC-QL2
On 1 of the 4 servers show the HBAs as CONNECTED, but... (3 Replies)
Discussion started by: Remi
3 Replies
4. AIX
Hi,
I'd like to share this...
I see all the luns on my aix when I do lspv, 10 of them, configured by the san contractor. I defined the first sanvg no problem, the second one no problem, but the third got problem and so on. It's random after the second, I think. The error is 0516-024 mkvg:... (5 Replies)
Discussion started by: itik
5 Replies
5. HP-UX
salut admin,
Normalement mon serveur doit voir un de mes LDEV à partir de deux chemins sur le SAN et ainsi lui attribuer seulement deux Target LUNs. Or il lui en a attribué 8!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Très bizzare!
Auriez vous une idée.
Merci pour votre aide appréciée (2 Replies)
Discussion started by: hmaiida
2 Replies
6. Filesystems, Disks and Memory
Hi
I´m new to san and lun´s
I see the disks, but are not able to mount them
bash-3.00# mountall
checking ufs filesystems
/dev/rdsk/c3t5006016930601F86d0s6: I/O error
Can't open /dev/rdsk/c3t5006016930601F86d0s6: I/O error
/dev/rdsk/c3t5006016930601F86d0s6: CAN'T CHECK FILE SYSTEM.... (1 Reply)
Discussion started by: ludvig
1 Replies
7. Solaris
I have a solaris 10 box which does not have internal disks it has just a single dual port HBA card. Storage team has assigned 2 LUNs to the system and i can see it from the probe-scsi-all
/pci@3,700000/SUNW,emlxs@0,1
Device PortID 10100 WWPN 5006016941e0a08d
LUN 0 Disk DGC ... (0 Replies)
Discussion started by: fugitive
0 Replies
8. Solaris
running Solaris10 with Qlogic FC adapters connected to a multi-host FC array..using VXFS/VXVM..
Is there in Solaris10 or using some Qlogic drivers to filter out only the LUNs this host can see ??
Normally this is done by LUN masking in the FC switch or the FC array itself..however, neither... (2 Replies)
Discussion started by: ppchu99
2 Replies
9. Solaris
Hello everyone.
I've been asked to check if something is wrong with the storage setup on these two SunOS 5.10 machines, which are being used as database servers with Oracle RAC configuration. Seems to be that the DB guy is complaining, telling that they are nearly out of space, which sounds... (4 Replies)
Discussion started by: kacareu
4 Replies
LEARN ABOUT DEBIAN
ql-dynamic-tgt-lun-disc
ql-dynamic-tgt-disc(8) System Administration ql-dynamic-tgt-disc(8)
NAME
ql-dynamic-tgt-lun-disc - Scans for newly added LUNs.
SYNOPSIS
ql-dynamic-tgt-lun-disc [OPTIONS]
DESCRIPTION
Dynamic TGT-LUN Discovery Utility
This utility scans for newly added LUNs. After adding new LUNs, you do not need to unload, then load the QLogic FC driver or reboot the
system
To begin scanning the LUNs issue following command:
# /usr/sbin/ql-dynamic-tgt-lun-disc
-al, --allow-lip
LIP is not issued by default, even if it is required for scanning new LUNs Setting this option, allows the utility to issue LIP.
-cl, --current-luns
Displays LUNS currently present
-e, --extended-scan
Use this option as "-e | --extended-scan". to rescan LUNs. This will identify any change in attributes of existing LUNs. This option
can be used in combination of scan/refresh or max luns
-h, --help, ?
Prints this help message
-i, --interactive
Use this option to use the menu driven program
-is, --iscsi
Use this option to operate on ISCSI HBAs, this option can be used in combination of any other supported option.
-m, --max-lun
To set the maximum LUNs to be scanned
-p, --proc
Use PROC file system for LUN scanning
-r, --refresh
To refresh, that is remove LUNs that are lost use the options "-r|--refresh". This will remove the LUNs which no more exist.
-s, --scan [ -r|--refresh ]
The QLogic LUN scan utility re-scans all the devices connected to the QLogic HBA
SEE ALSO
ql-lun-state-online(8), ql-hba-snapshot(8), ql-set-cmd-timeout(8)
Matthias Schmitz <matthias@sigxcpu.org> July 2009 ql-dynamic-tgt-disc(8)