Greetings,
Im not sure about 9.02 (is this a series 800 server?), but I had it on my 900/715 station (but thas isvery long ago...) in 9.05 or 9.07 I remember it was in SYS-ADMIN fileset if <ou have them...
From my notes:
(No space allowed between option flag and args)
rcdev : name of the devicefile on which recovery system is created
No compression allowed
with DDS drive : explicitly specify device file
rootdev can be:
/dev/dsk/0s0
/dev/root
/dev/hd
series : normally 700
so for /dev/dsk/6s0 on DDS:
you could also use dd to backup your hard disk to another or to a DDS drive
could any one help me
I have a HP UX 11.0 with a lot of VG and disks connected to SAN. I need to create a Golden Image having only the vg00 of this system. How do i do this using make_sys_image?
In case any have some docs, I would appreciate if You could share it.
Thanks
Dhanish (5 Replies)
Sorry if this has been asked and answered, but I can't find this particual problem. I've had an Ignite server running for years on a small internal network with images we load on daily basis. Tried to load two servers, L2000 and C3600 , both with same problem.
# boot lan.192.168.2.2 install
... (0 Replies)
Hello All,
I need to bring down our old 9000 series d350, but my supervisor wants an ignite backup created. I cannot find ignite in the usual places (/opt/ignite) nor can I find it in swlist. As far as I can tell the cd's are long gone.
Is there anywhere else I could look for ignite being... (6 Replies)
I've read the Ignite User/Admin Guide but I'm having trouble figuring out if I can do a make_net_recovery if the ignite server and client server are on completely different networks? If this can be done is there any special configuration? If I initiate the command from the server it looks like it... (3 Replies)
Works all.
Depot shared via nfs
dhcp working
setting file system,network,root password,etc
But when i start "go!" with installation,give me
this error.
How to fix,debug?
Thanks
http://s24.postimg.org/5hzbgk551/unixbell3.png (3 Replies)
Hi
Does anybody know how to get hold of a very old (A.3.7.n) copy of the ignite software depot for HP-UX 10.20? (7 Replies)
Discussion started by: gregsih
7 Replies
LEARN ABOUT OSF1
renamefset
renamefset(8) System Manager's Manual renamefset(8)NAME
renamefset - Rename an existing AdvFS fileset
SYNOPSIS
/usr/sbin/renamefset domain oldfileset newfileset
OPERANDS
Specifies the name of an existing AdvFS file domain. Specifies the name of a fileset in the domain. Specifies the new name for the file-
set.
DESCRIPTION
The renamefset command assigns a new name to an existing fileset within an AdvFS file domain. Before renaming a fileset, unmount the file-
set and its clone fileset, if there is one.
After renaming a fileset, update the corresponding entries in the /etc/fstab file to reflect the name change.
RESTRICTIONS
Because clone filesets are read-only, they cannot be renamed.
You must be the root user to use this command.
Each fileset within a domain must have a unique name of up to 31 characters. All whitespace characters (tab, new line, space, and so
forth) and the / # : * ? characters are invalid for fileset names.
EXAMPLES
The following example changes the name of the credit_fs fileset in the accounts_dmn file domain to new_credit_fs: # renamefset accounts_dmn
credit_fs new_credit_fs
SEE ALSO
Commands: chfsets(8), mkfdmn(8), mkfset(8), rmfset(8), showfsets(8)
File Formats: advfs(4)renamefset(8)