03-18-2009
go to obp and enter "boot cdrom". you'll get obp by enter "console -f" at the lom. you should see the "ok" prompt. if not you've to send a "break" from lom.
5 More Discussions You Might Find Interesting
1. Solaris
All,
After a power loss I went to power on our sun fire v120 that is running solaris 10 and now it will not boot. I tried power cycling it from the lom and pulling the cord but nothing works. All it does is after a power cycle it will start to boot and then start to spit out a bunch of hex... (2 Replies)
Discussion started by: jsandova
2 Replies
2. Solaris
Hi All,
My company has three V120 servers and two V245 servers. Currently we access ALOM on v245 thru NET MGT port. There are no NET MGT on V120. We use to access A/LOM on the V120s thru Windows Hyper Terminal connected to the Serial A port of v120. Since all of our Windows boxed are... (6 Replies)
Discussion started by: glieu
6 Replies
3. Solaris
Hi,
I recently acquired an old Sun Fire v120 from work. I plan to play around with this at home whilst I'm studying for my SCSA exams. Only problem is it currently has no memory installed. I believe the memory modules required are 168 pin PC133 DIMMs. Unfortunately, the original Sun modules are... (3 Replies)
Discussion started by: skinyana
3 Replies
4. Solaris
while installing zone this error is coming
zoneadm -z test install
ERROR: Error: no zonepath dataset.
Steps done to create one sample zone
zonecfg -z test
create
set zonepath=/zones/test
set autoboot=true
verify
commit
exit
zoneadm -z test install
ERROR: Error: no zonepath dataset.... (9 Replies)
Discussion started by: vijaysachin
9 Replies
5. Solaris
It's a DHCP server. We want to make a clone for fail over purpose since there are some identical systems available here. We do have a secondary DHCP server.
Hardware: Sun v120. OS: Solaris 9. Two disks without array, /var and /opt on the secondary disk.
How can I clone the system via network... (1 Reply)
Discussion started by: aixlover
1 Replies
LEARN ABOUT POSIX
sulogin
sulogin(1M) System Administration Commands sulogin(1M)
NAME
sulogin - access single-user mode
SYNOPSIS
sulogin
DESCRIPTION
The sulogin utility is automatically invoked by init when the system is first started. It prompts the user to type the root password to
enter system maintenance mode (single-user mode) or to type EOF (typically <CTRL-D>) for normal startup (multi-user mode). The user should
never directly invoke sulogin.
The sulogin utility can prompt the user to enter the root password on a variable number of serial console devices, in addition to the tra-
ditional console device. See consadm(1M) and msglog(7D) for a description of how to configure a serial device to display the single-user
login prompt.
FILES
/etc/default/sulogin Default value can be set for the following flag:
PASSREQ Determines if login requires a password. Default is PASSREQ=YES.
/etc/default/login Default value can be set for the following flag:
SLEEPTIME If present, sets the number of seconds to wait before login failure is printed to the screen and
another login attempt is allowed. Default is 4 seconds. Minimum is 0 seconds. Maximum is 5 seconds.
Both su(1M) and login(1) are affected by the value of SLEEPTIME.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsr |
+-----------------------------+-----------------------------+
SEE ALSO
login(1), consadm(1M), init(1M), su(1M), attributes(5), msglog(7D)
SunOS 5.10 25 Sep 2002 sulogin(1M)