Sponsored Content
Operating Systems Solaris How to start CDE for non root user on Solaris 10 Post 302298119 by TonyFullerMalv on Monday 16th of March 2009 06:37:47 PM
Old 03-16-2009
Re: How to start CDE for non root user on Solaris 10

CDE will not start unless your user has a home directory so if your user is to have a local home directory make it as follows:
# mkdir /export/home/<username>
# chown <username> /export/home/<username>

Then ensure that the user's passwd entry points to /export/home/<username> for their home directory.

Then test it by doing:
# su - <username>
$ pwd
Ensure the directory response is now the user's home directory.

CDE is also particular about being able to resolve the machine's hostname so make sure /etc/hosts is a link to /etc/inet/hosts, that /etc/inet/hosts is chmodded to 644 and contains a line that gives the hostname and its IP address. Confirm that the hostname in /etc/nodename matches the hostname in /etc/inet/hosts and if you are running Solaris 10 ensure that /etc/inet/ipnodes is a link to /etc/inet/hosts (why did Sun introduce yet another "hosts" file called ipnodes?)

HTH.

Tony Fuller
 

10 More Discussions You Might Find Interesting

1. HP-UX

CDE login Problem for root user only

Hi All, I m facing a problem that, i m not able to login as root user on cde on hp-ux 11.00, i can login as root on commond line as well as telnet. Thanks in Advance for help. Regards, Awadhesh (1 Reply)
Discussion started by: Awadhesh
1 Replies

2. HP-UX

root login problem in cde

Hi All, I m facing a problem that, i m not able to login as root user on cde on hp-ux 11.00, i can login as root on commond line as well as telnet. Thanks in Advance for help. Regards, Awadhesh (2 Replies)
Discussion started by: Awadhesh
2 Replies

3. AIX

Start CDE using Reflection on AIx

Hello. I want to know how to start CDE on AIX, to export the console under reflection. What commands are necesary to run on AIX to start CDE and after start It export the console using Reflection X. Someboy know how to do that. Regards (1 Reply)
Discussion started by: hmoday
1 Replies

4. Solaris

Permissions for the root user on Solaris 10

Hi I have a doubt, here if a file does not have the write permissions to the root user my script is going to write the data into that file. when i executed the script as root user. Is it correct ... ? (4 Replies)
Discussion started by: Shreedhar Naik
4 Replies

5. HP-UX

Help with CDE Root Login

Dear Forum, I had this problem initially with HPUX 11.23, all users including root could not login via CDE or telnet. Then after some workarounds, it resolved by resetting root password via console login. After enabling back all users to login normally (via CDE or telnet), only root can not... (4 Replies)
Discussion started by: irda
4 Replies

6. Solaris

Non-root user access to privileged ports-Solaris 8

Please let me know how to setup a non-root user to be able to access a privileged port (<1024) on Solaris 8. I am currently running tomcat as "tomcat" user and I get the following error during to start up: SEVERE: Error initializing endpoint java.net.BindException: Permission denied<null>:443 (5 Replies)
Discussion started by: pingmeback
5 Replies

7. HP-UX

Start SAM in TUI from CDE session

how can i start sam in TUI mode from a CDE session. i'm using hp-ux 11iv3 i tried to start SAM from a terminal from CDE session but each time i try to start it System Managment Homepage starts , so i telneted to server from a pc to start sam in TUI mode is there any other way to set my SAM to... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies

8. UNIX Desktop Questions & Answers

How to migrate Solaris 10 CDE config to HP-UX CDE.

Hello, Do you guys by any chance know what is the best (if any ) way to move CDE configuration from a SOLARIS 10 machine to HP-UX? Just the config (actions, text files etc). Thanks in advance! (0 Replies)
Discussion started by: binary0x01
0 Replies

9. Solaris

Enable FTP for root user in Solaris 10

I am not able to get ftp working for Solaris 10 for root user. I am getting login failed error. 331 Password required for root. Password: 530 Login incorrect. Login failed. Tried following things already. 1. SFTP works ok, still would like to know why FTP is not working (curious). 2.... (5 Replies)
Discussion started by: webkid
5 Replies

10. Solaris

Solaris 10 - 'ls' green for root user only

Welcome to all. Have an issue and looking for help so hope someone is able to give me some clues. I prepared some shell scripts with coloured output to help other guys to have more automated task. Not sure if I did this but now whenever I use 'ls' command for root user every output in... (29 Replies)
Discussion started by: TiedCone
29 Replies
hosts.equiv(4)						     Kernel Interfaces Manual						    hosts.equiv(4)

NAME
hosts.equiv, .rhosts - security files authorizing access by remote hosts and users on local host DESCRIPTION
The file and files named found in users' home directories specify remote hosts and users that are "equivalent" to the local host or user. Users from equivalent remote hosts are permitted to access a local account using or or to to the local account without supplying a password (see rcp(1), remsh(1), and rlogin(1)). The security provided by is implemented by the library routine, (see rcmd(3N)). In this description, hostequiv means either the system file or the user file. Note that must be owned either by the root or by the user in whose home directory it is found and it must not be a symbolic link. The file defines system-wide equivalency, whereas a user's file defines equivalency between the local user and any remote users to whom the local user chooses to allow or deny access. An entry in the hostequiv file is a single line (no continuations) in the format: Thus, it can be: o A blank line. o A comment line, beginning with a o A host name, optionally followed by a comment. o A host name and user name, optionally followed by a comment. A host or user name is a string of printable characters, excluding whitespace, newlines, and Names are separated by whitespace. For a user to be granted access, both the remote host name and the user name must "match" an entry in hostequiv. When a request is made for access, the file is searched first. If a match is found, access is permitted. If no match is found, the file is searched, if one exists in the local user's home directory. If the local user is a superuser, is ignored. A host name or user name must match the corresponding field entry in hostequiv in one of the following ways: Literal match A host name in hostequiv can literally match the official host name (not an alias) of the remote host. A user name in hostequiv can literally match the remote user name. For a user name to have literal match in the file, the remote user name must literally match the local user name. Domain-extended match The remote host name to be compared with entries in hostequiv is typically the official host name returned by (see gethostent(3N)). In a domain-naming environment, this is a domain-qualified name. If a host name in hostequiv does not literally match the remote host name, the host name in hostequiv with the local domain name appended may match the remote host name. If the host name in hostequiv is of this form, and if name literally matches the remote host name or if name with the local domain name appended matches the remote host name, access is denied regardless of the user name. If the user name in hostequiv is of this form, and name literally matches the remote user name, access is denied. Even if access is denied in this way by access can still be allowed by Any remote host name matches the host name in hostequiv. Any remote user matches the user name netgroup_name is the name of a network group as defined in netgroup(4). If the host name in hostequiv is of this form, the remote host name (only) must match the specified network group according to the rules defined in net- group(4) in order for the host name to match. Similarly, if the user name in hostequiv is of this form, the remote user name (only) must match the speci- fied network group in order for the user name to match. netgroup_name is the name of a network group as defined in netgroup(4). If the host name in hostequiv is of this form, and if the remote host name (only) matches the specified network group according to the rules defined in netgroup(4), access is denied. Similarly, if the user name in hostequiv is of this form, and if the remote user name (only) matches the specified network group, access is denied. Even if access is denied in this way by access can still be allowed by EXAMPLES
1. on contains the line: and on is empty. User on can use to or to account on without being prompted for a password. will, however, be prompted for a pass- word with or denied access with from to If in the home directory of user on contains: or then user can access from 2. is in the domain and are in the domain in the home directory of user on contains: User can access from since matches with local domain appended. But user from cannot access since does not match In order for user to be able to access from file on must contain: since is in a different domain. 3. in the home directory of user on contains: on contains the line: However, there is no file in the home directory of user on The user on can to account on without being prompted for a password, but on cannot to account on 4. in the home directory of user on contains: User from any host is allowed to access account on User from any host except can access account on 5. on contains the lines: Any user from except is allowed to access an account on with the same user name. However, if in the home directory of user on con- tains: then user from can access account on 6. on contains the line: The network group consists of: If is not running Network Information Service (NIS), user on any host can access account on If is running Network Information Service (NIS), and is in the domain user on any host, whether in or not, can access account on However, if in the home directory of user on contains the line: and is either not running Network Information Service (NIS) or is in domain no user on any host can access the account on If is run- ning Network Information Service (NIS) but is not in the domain this line has no effect. 7. on contains the line: The network group consists of: All users on are denied access to However, if in the home directory of a user on contains any of the following lines: then user on can access that account on WARNINGS
For security purposes, the files and should exist and be readable and writable only by the owner, even if they are empty. Care must be exercised when creating the The option to and prevents any authentication based on files for users other than a superuser. AUTHOR
was developed by the University of California, Berkeley. The and extensions were developed by Sun Microsystems, Inc. FILES
SEE ALSO
rcp(1), rdist(1), remsh(1), rlogin(1), remshd(1M), rlogind(1M), gethostent(3N), rcmd(3N), netgroup(4). hosts.equiv(4)
All times are GMT -4. The time now is 03:15 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy