SE(4)							   BSD Kernel Interfaces Manual 						     SE(4)

NAME

     se -- Cabletron EA41x SCSI bus Ethernet interface driver

SYNOPSIS

     se* at scsibus? target ? lun ?

DESCRIPTION

     The se driver supports the Cabletron EA41x SCSI bus Ethernet interface.

     This driver is a bit unusual.  It must look like a network interface and it must also appear to be a SCSI device to the SCSI system.

     In addition, to facilitate SCSI commands issued by userland programs, there are open(), close(), and ioctl() entry points.  This allows a
     user program to, for example, display the EA41x statistic and download new code into the adaptor - functions which can't be performed through
     the ifconfig(8) interface.  Normal operation does not require any special userland program.

SEE ALSO

     scsi(4), ifconfig(8)

AUTHORS

     Ian Dall <ian.dall@dsto.defence.gov.au>

     Acknowledgement: Thanks are due to Philip L. Budne <budd@cs.bu.edu> who reverse engineered the EA41x.  In developing this code, Phil's user-
     land daemon "etherd", was referred to extensively in lieu of accurate documentation for the device.

BUGS

     The EA41x doesn't conform to the SCSI specification in much at all.  About the only standard command supported is "inquiry".  Most commands
     are 6 bytes long, but the recv data is only 1 byte.  Data must be received by periodically polling the device with the recv command.

BSD
								 February 3, 1997							       BSD