Hi there,
I have a Debian 5.0 server newly installed.
By default, the ip address is given by dhcp.
Then I modify the files so that they look like this:
Then I try to apply changes with:
But at that point, I loose eth0:
And the only way to apply changes is to reboot the server.
Is this normal? How can I switch from dhcp to static address without rebooting?
Thanks for your help.
Santiago
Has anyone had an issue where:
If I telnet into a unix machine on my network, from within my natted address,
there is no speed issue.
When I telnet to the same machine using the static address, it is very very
slow.
This SCO 5.06. There is no nameserver running.
Please help. I have... (3 Replies)
Hello friend, I am new in UNIX, but I want to learn a lot
Well I have a problem to try to configure my PC with a static IP Address
(IP 192.168.1.39, Mask 255.255.255.0, gateway 192.168.1.1)
(DNS 200.48.225.130 and 200.48.225.146).
where are the file that I must be change?
The SO is Sun Solaris... (15 Replies)
Hi All
I am having a solaris 10 virtual machine on vista (using vmware 7) laptop.
Now i want to access virtual machine from vista using putty.
Problem is that i insalled the solaris machine as dhcp. and whenever i connect to internet or reboot my system the IP address of solaris... (1 Reply)
Hi all,
I have literally spent all day trying dozens of different combinations, re-installs and tweaks to try and resolve this problem. I would be EXTREMELY grateful if anyone can help/point me in the right direction.
I am using OpenBSD 4.6 and am trying to connect to my wireless network with... (1 Reply)
Hi All,
Could you please explain the purpose of assigning the static IP by using the DHCP Concept. Like by using the clients MAC address we assign the static IP Address. Waiting for your reply. Thanks in Advance. (6 Replies)
Hello,
Greetings!!
I have a server with 3 TB of disk space and 12 GB RAM and a i7 processor.
What I did thus far is to install Oracle Enterprise Linux (OEL 5.7)as the host system and install Oracle Virtual box and created 3 VM's. Installed OEL 5.7 on one of the VM, working on installing... (1 Reply)
Hi all,
I would need to register a random free subdomain address and associate that to my IP Address. Any suggestion of a good service?
Also I don't have a static IP but i remember that there are services that automatically reset the right IP address behind the subdomain but i don't remember... (1 Reply)
p { margin-bottom: 0.1in; line-height: 120%; }a:link { } Hello,
I'm have an interesting issue with some Raspberry Pi's which I have on my home network.
The pi's are on 192.168.1.102, 192.168.1.103, 192.168.1.104
Something very strange is happening on my network. The pi on 192.168.1.104 is... (2 Replies)
Hi All,
Am using centos 7 in my vmware workstatio with the bridged network. when run the ifconfig cmd its not at all showing the ip address and pls advise how to set static ip address in my linux box. (1 Reply)
Discussion started by: sarathkumar s
1 Replies
LEARN ABOUT DEBIAN
arpsend
arpsend(8) Containers arpsend(8)NAME
arpsend - send ARP requests
SYNOPSIS
arpsend -D -e target_ip [ -e target_ip ...] [-c count] [-w timeout] interface
arpsend -U -i source_ip [-c count] [-w timeout] interface
DESCRIPTION
Utility arpsend sends ARP packets on device interface to detect or update neighbours' ARP caches with a given IP.
COMMANDS
Run utility with one of the following commands:
-D Send broadcast ARP request to detect neighbours with target_ip. You have to specify target_ip (-e option).
-U Send broadcast ARP request to update neighbours' ARP caches with source_ip. You have to specify source_ip (-i option).
OPTIONS -c count
Number of packets to send. Default is infinity.
-w interval
Interval between packets, in seconds. Default is 1 second.
-i source_ip_address
Set source IP address field in ARP packet.
-e target_ip_address
Set target IP address field in ARP packet. Note that you can specify -e option multiple times to detect many IP addresses in one
utility call.
EXIT STATUS
arpsend returns 0 upon successful execution. If something goes wrong, it returns an appropriate error code.
1 EXC_USAGE
Usage error
2 EXC_SYSTEM
System error
3 EXC_RECV
ARP reply was received
EXAMPLES
To send request on interface eth0 to detect any neighbour computers with IP 192.168.10.200:
arpsend -D -e 192.168.10.200 eth0
To send request on interface eth0 to update neighbours' ARP caches with IP 192.168.10.200:
arpsend -U -i 192.168.10.200 eth0
NOTES
Interface you use have to be arpable and not be loopback (i.e. /sbin/ip link show interface should show neither NOARP nor LOOPBACK flags
in interface parameters).
SEE ALSO vzctl(8).
LICENSE
Copyright (C) 2000-2011, Parallels, Inc. Licensed under GNU GPL.
OpenVZ 28 Jun 2011 arpsend(8)